485/10/200 ST - Compressor Güde - Free user manual and instructions

USER MANUAL 485/10/200 ST Güde

Blue industrial air compressor with visible branding and control panel (no text-heavy elements)

485/10/200 ST KOMPRESSOR

01749

ENGLISH Please read the instructions carefully before starting the machine.

Product specification image showing two blue cylindrical tanks with Chinese labels and a blue circular icon.

1

Blue industrial pressure vessel with visible cooling fan and side legs (no text or symbols on body)

2

3

4

DE	Montage
EN	Assembly
FR	Montage
IT	Montaggio
NL	Montage
CZ	Montáz
SK	Montáz
HU	Szerelés

DE	Inbetriebnahme
EN	Starting-up the machine
FR	mise en service
IT	Messa in funzione
NL	Inbedrijfstelling
CZ	Uvedení do provozu
SK	Uvedenie do prevádzky
HU	Üzembe helyezés

DE	Betrieb
EN	Operation
FR	Fonctionnement
IT	Esercizio
NL	Gebruik
CZ	Provoz
SK	Prevádzka
HU	Üzemeltetés

DE	Reinigung / Wartung
EN	Cleaning / Maintenance
FR	Nettoyage / Entretien
IT	Pulizia / Manutenzione
NL	Schoonmaken / Onderhoud
CZ	Čištění / Údržba
SK	Čistenie / Údrzba
HU	Tisztítás / Karbantartás

1	DE Montage	SL Montaža
	EN Assembly	HR Montaža
	FR Montage	BG Монтаж
	IT Montaggio	RO Montaj
	NL Montage	BA Montaža
	CZ Montáž
	SK Montáž
	HU Szerelés

Illustration of a blue GUB air pressure cylinder with attached pipe fitting, next to an open cardboard box and an upward arrow (no text or symbols)

graph TD
    A["2: GVD VENTILE"] --> B["1: Pipe"]
    A --> C["3: Pipe"]
    A --> D["4: Pipe"]
    A --> E["5: Pipe"]
    E --> F["2: Pipe"]
    style A fill:#cce5ff,stroke:#333
    style B fill:#ffcccc,stroke:#333
    style C fill:#ffccff,stroke:#333
    style D fill:#ff6666,stroke:#333
    style E fill:#66ccff,stroke:#333
    style F fill:#ff6666,stroke:#333

DE Montage

EN Assembly

FR Montage

IT Montaggio

NL Montage

CZ Montáž

SK Montáž

HU Szerelés

SL Montaža

HR Montaža

BG Монтаж

RO Montaj

BA Montaža

6

Blue industrial air pressure vessel with visible branding and mounting base (no readable text or symbols)

Blue industrial robotic device with four legs and three black circular components, shown with a small inset image of three black circular components (no text or symbols)

Blue robotic leg with black base and green checkmark indicating alignment (no text or symbols)

START ✓

	DE	Inbetriebnahme	SL	Uvedba v pogon
	EN	Starting-up the machine	HR	Puštanje u rad
	FR	mise en service	BG	Пускане в действие
	IT	Messa in funzione	RO	Punerea în funcțiune
	NL	Inbedrijfstelling	BA	Puštanje u rad
	CZ	Uvedení do provozu
	SK	Uvedenie do prevádzky
	HU	Üzembe helyezés

1 Gude AIR PRESSURE MIN MAX

Gudas COMPRESSOR 2

EN Starting-up the machine

FR mise en service

graph TD
    A["TIP"] --> B["Gun"]
    B --> C["Shot"]
    C --> D["Bubble"]
    D --> E["Bar 4-8"]
    F["B"] --> G["Shot"]
    G --> H["Arrow to Wheel"]
    H --> I["Bar 2-3"]
    I --> J["Arrow to Wheel"]
    J --> K["Bar 1-3"]
    K --> L["Arrow to Ball"]
    L --> M["Bar 1"]
    M --> N["Arrow to Soccer"]
    N --> O["Arrow to Bar"]

DE Inbetriebnahme

EN Starting-up the machine

FR mise en service

Diagram of a device with black circular components and red diagonal lines, no visible text or symbols

TEST

Illustration of an air compressor with a hand holding a blade, showing airflow direction and component structure (no text or symbols)

2 400 V 180°

Simple illustration of a circular object with internal dots and a green checkmark (no text or symbols)

Diagram of a mechanical component with two circular holes and a red belt, showing a checkmark (no text or symbols present)

	DE	Betrieb - START	SL	Delovanje - START
	EN	Operation - START	HR	Rad - START
	FR	Fonctionnement - START	BG	Pábota - START
	IT	Esercizio - START	RO	Funcționare - START
	NL	Gebruik - START	BA	Rad - START
	CZ	Provoz - START
	SK	Prevádzka - START
	HU	Üzemeltetés - START

MIN 50 cm MIN 50 cm

1 ←→ 2 START MAX bar AUTO STOP

3 + - + - 2 10 9R 0 12 151 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100

DE Betrieb SL Delovanje
EN Operation HR Rad
FR Fonctionnement BG Работа
IT Esercizio RO Functionare
NL Gebruik BA Rad
CZ Provoz
SK Prevádzka
HU Üzemeltetés

Illustration of a spray gun emitting smoke with motion arrows indicating airflow (no text or symbols)

6.0μF PSI

AUTO START

MAX bar

$$ 4 8 5 / 1 0 / 2 0 0 \mathrm{ST} = 1 0 \text { bar } $$

	DE	Betrieb - STOP	SL	Delovanje - STOP
	EN	Operation - STOP	HR	Rad - STOP
	FR	Fonctionnement - STOP	BG	Pábota - STOP
	IT	Esercizio - STOP	RO	Funcționare - STOP
	NL	Gebruik - STOP	BA	Rad - STOP
	CZ	Provoz - STOP
	SK	Prevádzka - STOP
	HU	Üzemeltetés - STOP

1 STOP 1. OFF 2. ⏻ → ➕-

2 3 0 bar

4 1. 2.

DE Kondensat ablassen

EN Drain the condensate

FR Videz le condensat

IT Scaricare la condensa

NL Condens aftappen

GB After approx. 2-4 hours of use, the condensate that has formed must be drained from the receiver.

Illustration of a water droplet being poured into a bowl (no text or symbols)

4

Simple diagram showing two padlocks with an arrow indicating rotation or change (no text or symbols)

4	DE Keilriemen spannen	HU Ékszíj megfeszítése
	EN V-belt tensioning	SL Napenjanje klinastega jermena
	FR Tension de la courroie cunéiforme	HR Napetost klinastog remena
	IT Tensione della cinghia trapezoidale	BG Обтягане на клиновидния ремък
	NL V-riem spannen	RO Íntinderea curelei trapezoidale
	CZ Napnutí klinového řemenu	BA Napetost klinastog remena
	SK Napnutie klinového remeña

Simple diagram of two black circles connected by a string, with a dashed line indicating a tangent or reference line (no text or symbols)

Industrial air compressor unit with control panel and propeller, no visible text or symbols

1 4x

2 ca. 8 mm

3 4x

EN V-belt replacement

Simple diagram of two black circles connected by a red line, no text or symbols present

1

4x

Pure mechanical component diagram without any text, numbers, or symbols

2

Simple illustration of a cylindrical object with horizontal stripes and mounting brackets (no text or symbols)

Diagram showing two parallel lines with opposing arrows indicating flow or movement (no text or symbols)

3

Pure mechanical component diagram without any text, numbers, or symbols

Pure electrical circuit lines without any symbols

ca. 8 mm

4

4x

4	DE Wartung-Luftfilter	SL	Održavanje-Zračni filtar
	EN Maintenance-Air filter	HR	Поддръжка-Въздушен филтър
	FR Entretien-Filtre à air	BG	Întreținere-Filtru de aer
	IT Manutenzione-Filtro d'aria	RO	Održavanje-Zračni filtar
	NL Onderhoud-Luchtfilter	BA	Održavanje-Svijeća za paljenje
	CZ Údržba-Vzduchový filtr
	SK Údrzba-Vzduchový filter
	HU Karbantartás-Levegőszűrő

graph LR
    A["Factory Component"] --> B["Device 3.2."]
    B --> C["Component 1."]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333

2 H₂O 3

graph LR
    A["4"] --> B["1.2."]
    B --> C["3."]
    C --> D["4"]
    style A fill:#ccc,stroke:#333
    style B fill:#fff,stroke:#333
    style C fill:#fff,stroke:#333
    style D fill:#fff,stroke:#333

4	DE	Rückschlagventil prüfen	SL	Preverjanje povratnega ventila
	EN	Check valve inspection	HR	Provjera povratnog ventila
	FR	Contrôle de la soupape de retenue	BG	Проверка на възвратния клапан
	IT	Controllo della valvola di ritegno	RO	Verificarea supapei de reținere
	NL	Terugslagventiel controleren	BA	Provjera povratnog ventila
	CZ	Kontrola zpětného ventilu
	SK	Kontrola spätného ventilu
	HU	Visszacsapó szelep ellenőrzése

0 bar BAR

Close-up of a blue gas cylinder connected to a red and black pipe fitting, with no visible text or symbols.

1

2

3

Diagram showing correct and incorrect valve assembly with red X mark indicating failure or rejection

4 1

Technische Daten

Compressor	485/10/200 ST
Article no. 01749
Connection 400 V~50 Hz
Motor power 3,0 kW S1
Max. Motor speed 2850 min	-1
compressor speed	1200 min^-1
Number of cylinders 2
Suction capacity 480 l/min
Effective delivery quantity 400 l/min
Max. operating pressure 10 bar
Tank capacity 200 l
Weight 135 kg
Protection Type IP20
Protection Class F
Sound power level L_WA * 97 dB

Read and understand the operating instructions before using the appliance. Abide by all

the safety measures stated in the service manual. Act responsibly toward third parties.

In case of any doubts about connection and operation refer please to our customer center

Preserve all the documentation so that anyone who uses the compressor can consult this beforehand.

Specified Conditions Of Use

The compressor may only be used to produce compressed air at home, on yards and in workshops. – Respecting technical data and safety precautions.

The compressed air produced by the pressor cannot not be used for pharmaceuti- food or medical purposes or to fill the air tiles of scuba divers.

The compressor must be used in a suitable environment (well ventilated with an ambient temperature of between +5°C and +40°C) and cover in places with dust, acids, vapors, explosive flammable gases.

Do not use this product in any other way as stated

for normal use. Not observing general regulations in force and instructions from this manual does not make the manufacturer liable for damages.

Safety instructions

WARNING! Electric shock! There is a risk of injury caused by electric shock!

Operation is only allowed with a safety tch against stray current (RCD max. stray rent of 30mA).

Check the voltage. Technical data given on the type label must correspond with electric network voltage.

Insert the plug of the electrical cable in a socket of suitable shape, voltage and frequency complying with current regulations.

Use extension cables with a maximum length of 5 meters and with a cable cross-section of not less than 1.5 mm ^2 . Use of extension cables of different length and cross-section and also of adapters and multiple sockets should be avoided.

Check the cable and/or socket for damages before the appliance putting into operation.

To avoid danger, a damaged mains supply pipe must be replaced by the manufacturer. Do not under any

circumstances attempt any repair yourself.

Never let the compressor come into contact with water or other liquids and never direct the jet of liquids sprayed by tools connected to the compressor towards the compressor: as the appliance is live, this could cause electrocution or short-circuits.

Never use the appliance with bare feet or wet hands or feet.

Never yank the power cable to disconnect the plug from the power outlet or to move the compressor.

Warning: the compressor may restart when power is restored following a blackout.

Compressed air is a potentially dangerous form of energy; always take great care when using the compressor and its accessories.

This device is not intended for use by persons (including children) with limited physical, sensory or mental capabilities or without the necessary lack experience or knowledge unless they are supervised by a person who is responsible for their safety or were instructed by that person in how to use the device.

Children should be supervised to ensure that they do not play with the device. Always keep children and unauthorised persons out of reach of the appliance.

Never use the compressor without being supervised.

Never direct the jet of air towards persons, animals or your body.

Never keep the air flow in body holes as that could lead to fatal injuries!

Keep the work area free.

When operating, the compressor must be placed on a stable surface.

Attention: Operation is only permitted with supplied vibration dampers (rubber buffers).

Damage to the boiler can occur without vibration dampers!

Attention: In accordance with Pressure Vessel Directive 2014/29/EU, the boiler is subject to periodic inspection by a notified body (TÜV/DEKRA). For the use of the compressor, an inspection log must also be kept by a qualified (competent) person, in which the regular maintenance intervals are documented in the form of a maintenance table with the individual inspection points (such as air filter cleaning, draining condensation water from the tank, function test of the safety valve, visual inspection of the electrical lines, V-belt tension, etc.) of the compressor.

Safety goggles should be worn when using the compressor in order to protect the eyes against any foreign bodies lifted by the jet of air.

If possible, when using air-powered accessories, wear safety clothing.

Always maintain a safety distance of at least 4 meters between the compressor and the work area.

Caution! The pneumatic hose may lash you when the quick-acting coupling is opened! The pneumatic hose should be held by hand.

Always use the handle to move the compressor.

When using compressed air, you must know and comply with the safety precautions to be adopted for each type of application (inflation, airpowered tools, painting, washing with water-based deter - gents only, clinching, etc.).

When using compressed air, you must know and comply with the safety precautions to be adopted for each type of application (inflation, airpowered tools, painting, washing with water-based detergents only, clinching, etc.).

Caution! Never switch the compressor on or off using the plug. Pressure switch to be pressed at all times.

Do not leave the compressor on over night as it could become a source of danger.

At the end of your working day, switch the appliance off, release the air jet and unplug the compressor.

Warning: if the water that condenses is not drained, it may corrode the receiver, reducing its capacity and impairing safety.

As it is a contaminating product, condensate must be DISPOSED of in accordance with laws on protection of the environment and current legislation.

Never leave the appliance exposed to adverse weather conditions (rain, sun, fog, snow).

If this compressor is used outdoors, always remem ber to stow it after use in a covered or closed place.

Never use the compressor outdoors in rain or bad weather.

Do not place flammable or nylon/fabric objects close to and/or on the compressor.

Do not cover the air inlets on the compressor.

The compressor must not be fitted in a vehicle for industrial purposes without an inspection by an expert!

⚠️ If the compressor is used for industrial purposes, it must be checked by an expert before putting into operation for the first time. Such check must be ordered by the operator (under BetrSichV Section 17 No. 25 – operation safety regulation)

Caution! When fitted in automatic equipment, it is necessary to install appropriate alarm or warning devices in case of power outage or malfunction or compressor (e.g. feed line, etc.) failure.

Keep unused machinery and tools safely in a dry place out of the reach of children.

Operation of compressed air tools

To guarantee perfect and reliable operation of the rotary and percussive pneumatic tools such as impact wrenches, staplers or nailers, etc., the compressed air must be supplied filtered - with oil via the lubricator or maintenance unit

A filtered water separator should be used for var-nishing in any case.

To select a suitable pneumatic tool, the tool air consumption and the compressor effective amount delivered must necessarily be considered.

(Pneumatic tools and accessory equipment can be found at www.guede.com)

Operation at lower temperatures

At lower temperatures, below 5^ C, problems may be experienced when starting. They are manifested by growling of the electric motor. In such a case, the appliance must be immediately switched off and oil (5W30) changed in warmer conditions.

Requirements for operating staff

The operating staff must carefully read the Operating Instructions before using the appliance.

Qualification: Apart from the detailed instructions by a professional, no special qualification is necessary for appliance using.

Minimum age: Persons over 16 years of age can only work on the appliance. An exception includes youngsters trained in order to reach knowledge under supervision of the trainer during occupational education.

Training: Using the appliance only requires corresponding training by a professional or the Operating Instructions. No special training is necessary.

Emergency procedure

Conduct a first-aid procedure adequate to the injury and summon qualified medical attendance as quickly as possible. Protect the injured person from further harm and calm them down. For the sake of eventual accident, in accordance with DIN 13164, a workplace has to be fitted with a first-aid kit. It is essential to replace any used material in the first-aid kit immediately after it has been used.

If you seek help, state the following pieces of information:

1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)

Disposal

The disposal instructions are based on the icons placed on the appliance or on the package. Description of the respective meanings can be found in the section „Marking“.

Transport packaging disposal

The packaging protects the appliance against damage during transport. Packaging materials are usually chosen according to environmental-friendliness and waste treatment aspects and can therefore be recycled. Returning the packaging to material circulation saves raw materials and reduces waste. Parts of packaging (e.g. foils, styrofoam ^® ) can be dangerous to children.

Risk of suffocation!

Keep the packaging out of reach of children and dispose them as quickly as possible.

Maintenance

⚠️ Before carrying out any work on the machine, disconnect the plug from the socket.

Run the accessory connected dry until there is no more air in the receiver.

Prior to every use, visually check the machine to rule out any defects, in particular on the power cable and the plug.

Safety valve Functional check.

The machine must not be used under any circumstances if the machine or the safety devices are damaged.

Use only original accessories and original spare parts.

Never clean the machine and its components with solvents, flammable or toxic liquids. Us only a damp cloth making.

Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insufficient maintenance and care can lead to unforeseen accidents and injuries.

If necessary, a list of spare parts can be found at www.guede.com.

Guarantee

Warranty period of 12 months applies to commercial use and 24 months applies to private use and commences on the day of purchase of the device.

The guarantee solely covers inadequacies caused by material defect or manufacturing defect. Original payment voucher with the sales date needs to be submitted for any claim in the guarantee period.

The guarantee does not cover any unauthorised use such as appliance overloading, use of violence, damage as a result of any unauthorised interference or caused by foreign items. Failing to follow the operating and assembly instructions and common wear are also not included in the guarantee.

Service

Do you have any technical questions? Any claim? Do you need any spare parts or operating instructions? We will quickly help you and without needles bureaucracy at our web pages at www.guede.com in the Servicing part. Please help us be able to help you. In order to identify your device in case of claim we need the serial No., product No. and year of production. All this data can be found on the type label. Please enter it here for future reference:

Serial No.:

Art. No:

Year of production:

Important information for the customer

Please be sure to know that returning the product in or after the warranty period must be made in the original packaging.

Symbols

Read the Operating Instructions

Wear eye protective goggles!

Wear ear protectors!

Protect against humidity Never expose tool to rain.

Cable pulling / transport prohibited

Warning/caution

Dangerous voltage

Caution - hot surface!

Danger of burns!

Danger - automatic control (closed loop)

Any damaged or disposed electric or electronic devices must be delivered to appropriate collection centres.

Protect against humidity

This side up

Failure removal

Failures Causes Removal
Compressor not starting after being switched on	Pressure in the air jet exceeds the closing pressure	Release the pressure in the air jet so that the pressure switch gets automatically switched on
	Defective supply Have the current supply checked by an authorised person
	Defective pressure switch Have the pressure switch replaced by an authorised person (Güde service centre)
	Worn carbons Replace the carbons
After reaching the closed pressure, the compressor runs or buzzes for a short time and then switches off automatically	Electric cable is too long or its cross section is too small	Check the length and cross section of the electric cable
Compressor running constantly Suction filter is very dirty Clean or replace the suction filter