Güde 580/10/50 H/ 400V - Compressor

580/10/50 H/ 400V - Compressor Güde - Free user manual and instructions

Find the device manual for free 580/10/50 H/ 400V Güde in PDF.

📄 84 pages English EN Download 💬 AI Question
Notice Güde 580/10/50 H/ 400V - page 26
Pick your language and provide your email: we'll send you a specifically translated version.

User questions about 580/10/50 H/ 400V Güde

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Compressor in PDF format for free! Find your manual 580/10/50 H/ 400V - Güde and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 580/10/50 H/ 400V by Güde.

USER MANUAL 580/10/50 H/ 400V Güde

Translation of the original operating instructions

natural_image Blue KOMPRESSOR air compressor with visible engine, cooling unit, and side arm (no text or symbols on body)

Güde 580/10/50 H/ 400V - 1

Kompressor 580/10/50 H/ 400V

Art.-Nr. 50146

GÜDE GmbH & Co. KG

Birkichstrasse 6

74549 Wolpertshausen

Deutschland

Güde 580/10/50 H/ 400V - Kompressor 580/10/50 H/ 400V - 1

Güde

®

English Technical Data /Device description / Safety Warnings / Specified Conditions of Use / Emergency procedure / Symbols / Maintenance / Disposal / Guarantee / Service 26

natural_image Blue industrial air compressor unit with control panel and pressure gauge (no visible text or symbols)

2

2x

Güde 580/10/50 H/ 400V - Kompressor 580/10/50 H/ 400V - 2

4

2x

Güde 580/10/50 H/ 400V - Kompressor 580/10/50 H/ 400V - 3

3

2x

Güde 580/10/50 H/ 400V - Kompressor 580/10/50 H/ 400V - 4

5

2x

Güde 580/10/50 H/ 400V - Kompressor 580/10/50 H/ 400V - 5

6 2x

Güde 580/10/50 H/ 400V - Kompressor 580/10/50 H/ 400V - 6

8 2x

Güde 580/10/50 H/ 400V - Kompressor 580/10/50 H/ 400V - 7

10 2x

Güde 580/10/50 H/ 400V - Kompressor 580/10/50 H/ 400V - 8

7 2x

Güde 580/10/50 H/ 400V - Kompressor 580/10/50 H/ 400V - 9

9 2x

Güde 580/10/50 H/ 400V - Kompressor 580/10/50 H/ 400V - 10

11 2x

Güde 580/10/50 H/ 400V - Kompressor 580/10/50 H/ 400V - 11

Montage

EN Operation FR Fonctionnement IT Esercizio ES Operação

EN starting-up the device FR Mise en service IT Messa in funzione

ES Puesta en marcha NL Toestel in gebruik nemen cz Uvedení do provozu

natural_image Illustration of a blue KOMPRESSOR air compressor with components including a box, fan, and spool (no text or symbols)

Güde 580/10/50 H/ 400V - Montage - 1

text_image 2 1 COMPRESSOR 6 10 2 7 3 4 9 5 8 11

Güde 580/10/50 H/ 400V - Montage - 2

Güde 580/10/50 H/ 400V - Montage - 3

text_image 1 KOMPRESSOR MIN MAX

Güde 580/10/50 H/ 400V - Montage - 4

natural_image Illustration of a spray gun emitting a flame, with an arrow indicating motion direction (no text or symbols)

Güde 580/10/50 H/ 400V - Montage - 5

text_image AUTO START
MAX bar580/10/50 EU 400V= 10 bar

Güde 580/10/50 H/ 400V - Montage - 6

Güde 580/10/50 H/ 400V - Montage - 7

text_image 1 STOP 1. OFF 2. → -D-

Güde 580/10/50 H/ 400V - Montage - 8

text_image 2 0 bar 3

Güde 580/10/50 H/ 400V - Montage - 9

text_image 4 KOMPRESSOR 1. 2

Güde 580/10/50 H/ 400V - Montage - 10

Güde 580/10/50 H/ 400V - Montage - 11

Güde 580/10/50 H/ 400V - Montage - 12
max 1 bar

Güde 580/10/50 H/ 400V - Montage - 13

Güde 580/10/50 H/ 400V - Montage - 14
2-4 h ∞

EN After approx. 2-4 hours of use, the condensate that has formed must be drained from the receiver.

natural_image Top-down view of a blue agricultural machine with two wheels and a yellow shield (no text or symbols visible)

Güde 580/10/50 H/ 400V - Montage - 15

Güde 580/10/50 H/ 400V - Montage - 16

Güde 580/10/50 H/ 400V - Montage - 17

Güde 580/10/50 H/ 400V - Montage - 18

natural_image Illustration of a blue water tap dispensing liquid into a bowl (no text or symbols)

4

Güde 580/10/50 H/ 400V - Montage - 19

natural_image Two padlocks with arrows indicating rotation or synchronization (no text or symbols)

Güde 580/10/50 H/ 400V - Montage - 20

Güde 580/10/50 H/ 400V - Montage - 21

Güde 580/10/50 H/ 400V - Montage - 22

natural_image Two abstract diagrams: a blue circle with a square symbol and an orange arrow pointing right, and a black circle connected by a red line to a black circle (no text or symbols)

Güde 580/10/50 H/ 400V - Montage - 23

text_image 1 4x

Güde 580/10/50 H/ 400V - Montage - 24

text_image 2

Güde 580/10/50 H/ 400V - Montage - 25

text_image 3

Güde 580/10/50 H/ 400V - Montage - 26

text_image ca. 8 mm

Güde 580/10/50 H/ 400V - Montage - 27

text_image 4 4x

Güde 580/10/50 H/ 400V - Montage - 28

Güde 580/10/50 H/ 400V - Montage - 29

flowchart
graph LR
    A["1: Air Inlet"] --> B["3.2. Process"]
    B --> C["1. Output with two plastic parts"]

Güde 580/10/50 H/ 400V - Montage - 30

text_image 2 H₂O 3

Güde 580/10/50 H/ 400V - Montage - 31

flowchart
graph LR
    A["Stage 4"] --> B["1.2."]
    B --> C["3."]
    C --> D["Output Arrow"]
    style A fill:#ccc,stroke:#333
    style B fill:#ddd,stroke:#333
    style C fill:#ddd,stroke:#333
    style D fill:#fff,stroke:#333

Güde 580/10/50 H/ 400V - Montage - 32

Güde 580/10/50 H/ 400V - Montage - 33

Güde 580/10/50 H/ 400V - Montage - 34

text_image 0 bar BAR

Güde 580/10/50 H/ 400V - Montage - 35

natural_image Close-up of a blue industrial air compressor with visible cooling fan and valve (no text or symbols)

Güde 580/10/50 H/ 400V - Montage - 36

text_image 1 L

Güde 580/10/50 H/ 400V - Montage - 37

text_image 2

Güde 580/10/50 H/ 400V - Montage - 38

text_image 3

Güde 580/10/50 H/ 400V - Montage - 39

text_image Technical diagram showing two mechanical assembly states with red X and blue checkmark indicating failure or inspection.

Güde 580/10/50 H/ 400V - Montage - 40

text_image 4 L

Technische Daten

Read and understand the operating instructions before using the appliance. Abide by

all the safety measures stated in the service manual. Act responsibly toward third parties. In case of any doubts about connection and operation refer please to our customer center

Preserve all the documentation so that anyone who uses the compressor can consult this beforehand.

Specified Conditions Of Use The compressor may only be used to produce compressed air at home, on yards and in workshops. – Respecting technical data and safety precautions.

Do not use this product in any other way as stated for normal use. Not observing general regulations in force and instructions from this manual does not make the manufacturer liable for damages.

Safety instructions

Güde 580/10/50 H/ 400V - Montage - 41

The compressed air produced by the compressor cannot not be used for pharmaceutical, food or medical purposes or fill the air bottles of scuba divers.

Güde 580/10/50 H/ 400V - Montage - 42

The compressor must be used in a stable environment (well ventilated with ambient temperature of between +5°C and +40°C) and never in places with dust, sls, vapors, explosive or flammable gases.

⚠ WARNING! Electric shock! There is a risk of an injury caused by electric shock!

Operation is only allowed with a safety switch against stray current (RCD max. stray current of 30mA).

Check the voltage. Technical data given on the type label must correspond with electric network voltage.

Insert the plug of the electrical cable in a socket of suitable shape, voltage and frequency complying with current regulations.

Use extension cables with a maximum length of 5 meters and with a cable cross-section of not less than 1.5 mm2. Use of extension cables of different length and cross-section and also of adapters and multiple sockets should be avoided.

Check the cable and/or socket for damages before the appliance putting into operation. To avoid danger, a damaged mains supply pipe must be replaced by the manufacturer. Do not under any circumstances attempt any repair yourself.

Never let the compressor come into contact with water or other liquids and never direct the jet of liquids sprayed by tools connected to the compressor towards the compressor: as the appliance is live, this could cause electrocution or short-circuits.

Never use the appliance with bare feet or wet hands or feet.

Never yank the power cable to disconnect the plug from the power outlet or to move the compressor.

Warning: the compressor may restart when power is restored following a blackout.

Compressed air is a potentially dangerous form of energy; always take great care when using the compressor and its accessories.

This device is not intended for use by persons (including children) with limited physical, sensory or mental capabilities or without the necessary lack experience or knowledge unless they are supervised by a person who is responsible for their safety or were instructed by that person in how to use the device.

Children should be supervised to ensure that they do not play with the device. Always keep

children and unauthorised persons out of reach of the appliance.

Never use the compressor without being supervised.

Never direct the jet of air towards persons, animals or your body.

Never keep the air flow in body holes as that could lead to fatal injuries!

Keep the work area free.

When operating, the compressor must be placed on a stable surface.

Caution! The compressor may only be used with appropriate wheels and rubber bumps.

Safety goggles should be worn when using the compressor in order to protect the eyes against any foreign bodies lifted by the jet of air.

If possible, when using air-powered accessories, wear safety clothing.

Always maintain a safety distance of at least 4 meters between the compressor and the work area.

Caution! The pneumatic hose may lash you when the quick-acting coupling is opened! The pneumatic hose should be held by hand.

Always use the handle to move the compressor. When using compressed air, you must know and comply with the safety precautions to be adopted for each type of application (inflation, airpowered tools, painting, washing with water-based detergents only, clinching, etc.).

When using compressed air, you must know and comply with the safety precautions to be adopted for each type of application (inflation, airpowered tools, painting, washing with water-based detergents only, clinching, etc.).

Caution! Never switch the compressor on or off using the plug. Pressure switch to be pressed at all times.

Do not leave the compressor on over night as it could become a source of danger.

At the end of your working day, switch the appliance off, release the air jet and unplug the compressor.

Warning: if the water that condenses is not drained, it may corrode the receiver, reducing its capacity and impairing safety.

As it is a contaminating product, condensate must be DISPOSED of in accordance with laws on protection of the environment and current

legislation.

Never leave the appliance exposed to adverse weather conditions (rain, sun, fog, snow).

If this compressor is used outdoors, always remember to stow it after use in a covered or closed place.

Never use the compressor outdoors in rain or bad weather.

Do not place flammable or nylon/fabric objects close to and/or on the compressor.

Do not cover the air inlets on the compressor.

The compressor must not be fitted in a vehicle for industrial purposes without an inspection by an expert!

If the compressor is used for industrial purposes, it must be checked by an expert before putting into operation for the first time. Such check must be ordered by the operator (under BetrSichV Section 17 No. 25 – operation safety regulation)

Caution! When fitted in automatic equipment, it is necessary to install appropriate alarm or warning devices in case of power outage or malfunction or compressor (e.g. feed line, etc.) failure.

Keep unused machinery and tools safely in a dry place out of the reach of children.

Operation of compressed air tools

To guarantee perfect and reliable operation of the rotary and percussive pneumatic tools such as impact wrenches, staplers or nailers, etc., the compressed air must be supplied filtered - with oil via the lubricator or maintenance unit A filtered water separator should be used for varnishing in any case.

To select a suitable pneumatic tool, the tool air consumption and the compressor effective amount delivered must necessarily be considered.

(Pneumatic tools and accessory equipment can be found at www.guede.com)

Operation at lower temperatures

At lower temperatures, below 5^ C, problems may be experienced when starting. They are manifested by growling of the electric motor. In such a case, the appliance must be immediately switched off and oil (5W30) changed in warmer conditions.

Requirements for operating staff

The operating staff must carefully read the Operating Instructions before using the appliance.

Qualification: Apart from the detailed instructions by a professional, no special qualification is necessary for appliance using.

Minimum age: Persons over 16 years of age can only work on the appliance. An exception includes youngsters trained in order to reach knowledge under supervision of the trainer during occupational education.

Training: Using the appliance only requires corresponding training by a professional or the Operating

Instructions. No special training is necessary.

Emergency procedure

Conduct a first-aid procedure adequate to the injury and summon qualified medical attendance as quickly as possible. Protect the injured person from further harm and calm them down. For the sake of eventual accident, in accordance with DIN 13164, a workplace has to be fitted with a first-aid kit. It is essential to replace any used material in the first-aid kit immediately after it has been used.

If you seek help, state the following pieces of information:

  1. Accident site

  2. Accident type

  3. Number of injured persons

  4. Injury type(s)

Disposal

The disposal instructions are based on the icons placed on the appliance or on the package. Description of the respective meanings can be found in the section „Marking“.

Transport packaging disposal

The packaging protects the appliance against damage during transport. Packaging materials are usually chosen according to environmental-friendliness and waste treatment aspects and can therefore be recycled. Returning the packaging to material circulation saves raw materials and reduces waste. Parts of packaging (e.g. foils, styrofoam ^® ) can be dangerous to children.

Risk of suffocation!

Keep the packaging out of reach of children and dispose them as quickly as possible.

Maintenance

⚠️ Before carrying out any work on the machine, disconnect the plug from the socket. Run the accessory connected dry until there is no more air in the receiver.

Prior to every use, visually check the machine to rule out any defects, in particular on the power cable and the plug.

Safety valve Functional check.

The machine must not be used under any circumstances if the machine or the safety devices are damaged.

Use only original accessories and original spare parts.

Never clean the machine and its components with solvents, flammable or toxic liquids. Us only a damp cloth making.

Only a regularly maintained and treated appli-ance can serve as a satisfactory aid. Insufficient maintenance and care can lead to unforeseen accidents and injuries.

If necessary, a list of spare parts can be found at www.guede.com.

Disposal

Güde 580/10/50 H/ 400V - Disposal - 1

Waste batteries and waste electrical and electronic equipment must not be disposed of together with household waste. Waste batteries and waste electrical and electronic equipment must be collected and disposed of separately. Remove used batteries, accumulators and lamps from the devices before disposing of them. Ask the local authorities or your retailer about recycling centres and collection points. Depending on local regulations, retailers may be obliged to take back used batteries and waste electrical and electronic equipment free of charge. Help reduce the demand for raw materials by reusing and recycling your used batteries and waste electrical and electronic equipment. Waste batteries (especially lithium-ion batteries) and waste electrical and electronic equipment contain valuable, recyclable materials that can have a negative impact on the environment and your health if not disposed of in an environmentally friendly manner. Delete any personal data on your old device before disposing of it.

Guarantee

Warranty period of 12 months applies to commercial use and 24 months applies to private use and commences on the day of purchase of the device.

The guarantee solely covers inadequacies caused by material defect or manufacturing defect. Original payment voucher with the sales date needs to be submitted for any claim in the guarantee period.

The guarantee does not cover any unauthorised use such as appliance overloading, use of violence, damage as a result of any unauthorised interference or caused by foreign items. Failing to follow the operating and assembly instructions and common wear are also not included in the guarantee.

Service

Do you have any technical questions? Any claim? Do you need any spare parts or operating instructions? We will quickly help you and without needles bureaucracy at our web pages at www.guede.com in the Servicing part. Please help us be able to help you. In order to identify your device in case of claim we need the serial No., product No. and year of production. All this data can be found on the type label. Please enter it here for future reference:

Serial No.:

Art. No:

Year of production:

Important information for the customer

Please be sure to know that returning the product in or after the warranty period must be made in the original packaging.

Symbols

Güde 580/10/50 H/ 400V - Symbols - 1

Read the Operating Instructions

Güde 580/10/50 H/ 400V - Symbols - 2

Wear eye protective goggles! Wear ear protectors!

Güde 580/10/50 H/ 400V - Symbols - 3

Protect against humidity Never expose tool to rain.

Güde 580/10/50 H/ 400V - Symbols - 4

Cable pulling / transport prohibited

Güde 580/10/50 H/ 400V - Symbols - 5

Warning/caution

Güde 580/10/50 H/ 400V - Symbols - 6

Dangerous voltage

Güde 580/10/50 H/ 400V - Symbols - 7

Caution - hot surface! Danger of burns!

Güde 580/10/50 H/ 400V - Symbols - 8

Danger - automatic control (closed loop)

Güde 580/10/50 H/ 400V - Symbols - 9

Any damaged or disposed electric or electronic devices must be delivered to appropriate collection centres.

Güde 580/10/50 H/ 400V - Symbols - 10

Protect against humidity

Güde 580/10/50 H/ 400V - Symbols - 11

This side up

Failure removal

Failures Causes Removal
Compressor not starting after being switched onPressure in the air jet exceeds the closing pressureRelease the pressure in the air jet so that the pressure switch gets automatically switched on
Defective supply Have the current supply checked by an authorised person
Defective pressure switch Have the pressure switch replaced by an authorised person (Güde service centre)
Worn carbons Replace the carbons
After reaching the closed pressure, the compressor runs or buzzes for a short time and then switches off automaticallyElectric cable is too long or its cross section is too smallCheck the length and cross section of the electric cable
Compressor running constantly Suction filter is very dirty Clean or replace the suction filter

Données techniques

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Güde

Model : 580/10/50 H/ 400V

Category : Compressor