BabyBubble - Baby bathtub Lionelo - Free user manual and instructions
Find the device manual for free BabyBubble Lionelo in PDF.
User questions about BabyBubble Lionelo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Baby bathtub in PDF format for free! Find your manual BabyBubble - Lionelo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BabyBubble by Lionelo.
USER MANUAL BabyBubble Lionelo
In case of any questions or comments on the purchased product, please contact
us: help@lionelo.com
Producer:
BrandLine Group Sp. z o. o.
A. Kriegewskiego 1, 61-248 Poznań, Poland
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
WARNING - DROWNING HAZARD
- Children have drowned while bathing.
- Children can drown in as little as 2~cm of water in a very short time.
- Always remain in contact with your child during bathing.
- Never leave your baby unattended in the bath, even for a few moments. If you need to leave the room, take the baby with you.
- Always ensure the suction cups are well adherent to the bath tub.
- Babies and young children face a drowning hazard during bath time.
- Do not place this product on any raised surface that is not specifically intended for this product.
- To prevent scalding from hot water, position the product so that the child cannot access the water source.
- Before placing your child in the bath, always test the water temperature to ensure it is safe.
- Ensure the product is stable and secure before each use.
- Do not use the product if any components are damaged or missing.
- Only use spare parts or accessories that are approved by the manufacturer.
-
Avoid directing the water jet straight at the thermometer.
-
WARNING: This product contains a button battery. Swallowing a button battery poses a risk of severe internal chemical burns.
- WARNING: Dispose of used batteries immediately. Keep new and used batteries out of the reach of children. If you suspect that batteries have been swallowed or inserted into any part of the body, seek medical advice immediately.
WARNING FOR THE INSERT
- Use only the insert included in the bathtub kit.
- This product is only suitable for children who cannot sit up unassisted.
- Always make sure the insert is properly secured and stable in the bathtub before use.
Important! When using the insert, make sure the water level stays below the maximum level marked with MAX.
BATTERY WARNINGS
- Disposable, non-rechargeable batteries should not be charged.
- Avoid mixing different types of batteries or combining new and used batteries in the device.
- Ensure batteries are inserted with the correct polarity.
- Remove used batteries from the product.
- The power supply terminals must not be short-circuited.
- If the product is not used for a long period of time, remove the batteries from the compartment.
LIST OF ELEMENTS (FIG. A)
- Legs
- Bathtub body
- Drain
- Electronic thermometer
- Bath insert
ASSEMBLY
- Place the bathtub on a flat surface.
- Spread the legs on both sides of the bathtub (Fig. 1). When the elements are properly extended, you will hear a click.
- Next, set the bathtub upright on its legs and press down on the bottom (Fig. 2).
- Plug the drain using the provided stopper (Fig. 3), then fill the tub with water.
DISASSEMBLY
To fold the bathtub, flip it over and press down on one side of the bottom, then the other (Fig. 4). Next, fold the legs inwards (Fig. 5).
FITTING THE BATH INSERT
First, attach the anti-slip feet to the insert. Then, place the insert securely into the bathtub. Press the insert firmly into the bathtub until it is securely attached to the bottom (Fig. 6).
Important! The insert should be placed on the opposite side of the bathtub from the thermometer.
Important! Wet the suction cups before attaching the insert to the bathtub. This will help them stick more securely.
THERMOMETER
To check the water temperature, submerge the thermometer probe in the water (Fig. 7). To replace the batteries in the thermometer, remove the screws holding the cover in place (Fig. 8), then insert new batteries (Fig. 9).
Important! The thermometer is not waterproof. Avoid submerging or soaking it in water.
CLEANING
To clean the bathtub, insert, and thermometer probe, use a cloth and a mild detergent. Wipe the thermometer with a dry cloth.
The photos are for reference only, the actual appearance of products may differ from the photos.
Drogi Kliencie!
WAARSCHUWING - VERDRINKINGSGEVAAR
WAARSCHUWING VOOR BADINZET
EN: The product complies with the requirements of European Union directives. In accordance with Directive 2012/19/EU, this product is subject to separate collection. The product should not be disposed of with municipal waste as it may pose a risk to the environment and human health. Return the used product to the recycling centre for electrical and electronic equipment.
Detailed warranty conditions are available on the website: