AD200Pro II - Flash GODOX - Free user manual and instructions

USER MANUAL AD200Pro II GODOX

Consult instructions for use.

Used electrical and electronic equipment (WEEE) should not be mixed with general household waste. Please contact your local authority for further details of your nearest designated collection point.

Compliance with the essential requirements of the applicable EU Directives

Compliance with Part 15 of the Federal Communications Commissions' (FCC) Rules

Explanation of safety icons

General warning

Warning - electrical shock - high voltage

Bright light hazard

Do Not Stare at operating lamp. Eye injury may result.

Use eye protection during servicing!

UV light hazard!

Use UV radiation eye and skin protection during servicing!

IR light hazard

Warning, hot surface!

Important Safety Instructions and Precautions

Godox products, especially studio packs, studio flashes, outdoor flashes should only be operated by professionals.

Carefully read and fully understand the instruction manual before use and strictly follow the safety instructions. Failure to do so may result in death, serious injury, damage to the product, or other property damage.

Danger

- Professional lighting fixture is prohibited for children. When children are near, parents or guardians must supervise closely to prevent them from personal injury due to collision with fixture or private use of fixture.

- This product is not ordinary lighting fixture and cannot be used for general lighting. Anyone who has suffered eye damage or has sensitive eyes should avoid using this product. Do not point the flash directly at the eyes (especially baby's eyes) under any circumstances, as this could impair vision in a short time. If it causes eye discomfort, turn off the fixture, suspend use and seek medical attention promptly.

- High voltage exists when the flash is powered on. Internal capacitors will remain charged for some time after power off.

- For high-voltage (mains) powered products (such as studio flashes, studio packs), use a socket with an earth protection device for power supply.

- Do not use damaged product. Stop using immediately if the product shell is cracked due to falling, squeezing, or strong impact, to avoid touching the internal electronic components and getting an electric shock.

- Disconnect power source or remove batteries (if it has one) before replacing flash tube, protective glass, or fuses. Allowing 10 minutes to cool before replacing flash tube, and wear insulated or heat resistant gloves when operating.

- Please use only the accessories recommended by our factory to avoid fire, electric shock or personal injury. If an extension cord is required, use the original extension cord or one recommended by the manufacturer (an extension cord with a current rating greater than or equal to that of the equipment). Extension cords rated at less than that of the equipment may cause fire, electric shock, other serious personal injury hazards, or property damage.

- Use only intact ground connection cables or ground extension cables that have been expressly recognized by the manufacturer for use in

the operation of powered products. Damaged or twisted connection cables must be replaced immediately! The product has a long input power cord, so please place the power cord in a safe position to avoid it coming into contact with overheated objects, being improperly placed and causing damage by pulling, or tripping over on-site personnel.

• For high-voltage (mains) powered products (such as studio flashes, studio packs), the power plug can be used as a power-off switch and should be kept readily accessible at all times. Disconnect the power supply when not in use.
• When cleaning and repairing the product with power cord, turn off the power before unplugging the product's power cord from the power outlet. When not in use, do not pull the power cord to unplug the product from the power outlet. Unplug the product from the power outlet by grasping both ends of the plug with your hands.
• Do not use and store this product in explosive atmospheres (near flammable volatile solvents such as alcohol, gasoline, or gases such as methane and ethane).
• Maintain at least 1 meter distance between the flash head and the user, other people, and heat-sensitive or flammable items during and after operation of the product.
• Do not use accessories not been approved by our company to avoid

fire, electric shock, other serious personal injury hazards, or property damage.

- High voltage inside! Do not disassemble the product without authorization. If the product malfunctions, it must be checked and repaired by our company or authorized repair personnel.

Warning

- This equipment is not waterproof, please keep it dry and do not immerse it in water or other liquids. The equipment should be installed in a dry and ventilated place, and avoid using it in rainy, humid, dusty or overheated environments. Do not place any objects on the light or let liquid flow into the light to avoid accidents.

- Extreme caution must be exercised when using it, do not touch high-temperature parts such as flash tubes to avoid burns.

- Do not block or cover the heat dissipation port of the product.

● After use, the product should be completely cooled before packaging.

- Some products have built-in lithium batteries. Please use a dedicated charger to charge, and use them within the specified voltage and temperature range according to the correct operating instructions.

- If the product is powered by lithium batteries. Please note:

- Do not disassemble, crush, or puncture the battery;

• Avoid short-circuiting the battery contacts;
• Do not expose the battery to fire or water;
• Do not expose the battery to temperatures above 60^ C;
• Keep out of reach of children;

- Protect the battery from excessive shock or vibration;

- Do not use a damaged battery;

- If the battery leaks, avoid contact with the leaking fluid;

- If the battery fluid comes into contact with your eyes, immediately rinse with water for at least 15 minutes. Lift your eyelids until there are no signs of fluid and seek medical attention promptly.

● If the product is powered by alkaline batteries. Please note:

- Use only the batteries or power sources specified in the instruction manual;

- Keep batteries and other small accessories out of the reach of children and infants. If a battery or small accessory is accidentally swallowed, seek medical attention immediately;

- If the battery leaks, changes color, deforms, smokes or emits an unusual smell, remove the battery immediately. Be careful during operation to avoid burns. Continued use may cause fire, electric shock, or skin burns;

- Do not use any deformed or modified batteries;

- Do not disassemble or modify the product or battery;

- Avoid heating, welding, exposing the battery to fire or water;

• Do not subject the battery to strong external impacts;
• Do not incorrectly insert the positive and negative ends of batteries, or mix old and new batteries or different types of batteries.

Attention

- All transport protective materials and packages on the product must be removed before use.

- When not in use, please turn off the product and stop the power supply promptly.

- Clean gently with a dry cloth. Do not use a wet cloth as it may damage the device.

- Do not place equipment near flammable and volatile solvents such as alcohol and gasoline.

- Before storing, make sure that the equipment has cooled down completely. For storage, unplug the power cord from the equipment. The equipment should be placed in the carrying case or in a ventilated dry place.

- If the product is powered by lithium batteries, who have limited lifespans and will gradually lose their charging capacities, which is irreversible. As the battery ages, the product's battery life will decrease. The lifespan of lithium battery is estimated to be 2 to 3

years. Please regularly check the battery, and if the charging time significantly increases or the battery life significantly decreases, consider replacing the battery.

• Confirm and comply with all relevant local laws and regulations when handling any batteries.
• The safety instructions are formulated according to the strict testing of the factory, and the design and specifications of the equipment are subject to change without prior notice. Customers can view the latest electronic instruction manuals on the official website of Godox and learn about the latest product information.