UFESA Flexy-Heat NCD Complex - Heated blanket/cushion

Flexy-Heat NCD Complex - Heated blanket/cushion UFESA - Free user manual and instructions

Find the device manual for free Flexy-Heat NCD Complex UFESA in PDF.

📄 52 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice UFESA Flexy-Heat NCD Complex - page 14
Pick your language and provide your email: we'll send you a specifically translated version.
Product typeCervical and back heating cushion
BrandUFESA
ModelFlexy-Heat NCD Complex
CategoryBlanket / Heating cushion
UseMuscle relaxation for neck and back (cervical and dorsal area)
Approx. dimensions50 x 30 cm
Approx. weight500 g
Power supplyMains (220-240 V ~ 50/60 Hz)
Power100 W (estimate)
ControlsSlide switch 0-1-2-3
Temperature levels3 (positions 1, 2, 3)
Automatic shut-offAfter 90 minutes
Operation indicatorIndicator light on the control
Exterior materialSoft polymer (removable cover)
Cover careMachine wash at 30°C, delicate cycle
Control cleaningDo not immerse, wipe with a dry cloth
SafetyOverheat protection, automatic shut-off, do not fold
AttachmentAdjustable fastening system (velcro/press) for the body
CompatibilityUsable only with control model 24125 or 24130
WarrantyAccording to applicable legislation (2 years minimum EU)
RepairabilityAuthorized technical service mandatory; no opening by user
StorageStore flat in a dry place, after cooling
RecyclingDo not dispose of with household waste, take to recycling center (WEEE)

Frequently Asked Questions - Flexy-Heat NCD Complex UFESA

How to turn on the Flexy-Heat NCD Complex heating cushion?
Plug the device into the mains, then slide the switch to position 1, 2 or 3. The indicator light turns on to indicate operation. To turn off, set the switch back to 0 before unplugging.
What is the maximum operating time?
The heating cushion automatically turns off after 90 minutes of continuous operation (safety). To restart, set the switch to 0, wait a few seconds, then select the desired temperature again.
Can I machine wash the heating cushion?
Yes, the cover (without the control) can be machine washed at 30°C, delicate cycle, with liquid detergent. Use a laundry bag to protect the fasteners. Do not wash the control and never immerse it.
How to install the cushion for the back area (NCD model)?
Place the upper part around the neck like the NC model, then adjust the lower part to the waist by fastening the snap closure at navel height. The product should be held well without folding the heating elements.
Can the cushion be used by children?
Children under 3 years old cannot use the device. Ages 3 to 8, only under adult supervision or if a parent/guardian has preset the controls. From 8 years old, possible under supervision after safety instructions.
What to do if the control does not light up?
Check that the control is properly connected to the cushion, that the mains socket is powered, and that the cord is not damaged. If the problem persists, contact authorized technical service.
Can I use the cushion with other controls?
No, use only the supplied control unit (models 24125 for Flexy-Heat LM or 24130 for Flexy-Heat NC/NCD). Using another control can be dangerous and voids the warranty.
How to store the heating cushion?
Let it cool completely, then fold it with as few creases as possible and store it in its original packaging in a dry place. Do not place anything on top and do not wrap the cord around the control.
What to do if the product heats less after a while?
This is normal: automatic shut-off activates after 90 minutes. The indicator light starts blinking. Set the switch back to 0, wait a few seconds, then select the temperature again. If the problem persists, check the connections.
How to dispose of the heating cushion at end of life?
Do not throw it away with household waste. Deposit it at a collection point for waste electrical and electronic equipment (WEEE) in accordance with Directive 2012/19/EU. Thereby contribute to environmental protection.

User questions about Flexy-Heat NCD Complex UFESA

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Heated blanket/cushion in PDF format for free! Find your manual Flexy-Heat NCD Complex - UFESA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Flexy-Heat NCD Complex by UFESA.

USER MANUAL Flexy-Heat NCD Complex UFESA

natural_image Three types of medical or fitness equipment with dotted patterns, shown from different angles (no text or symbols visible)

1 2 3 4

1 2 3 4

UFESA Flexy-Heat NCD Complex - 3

INSTRUCCIONES IMPORTANTES: CONSERVAR PARA USO FUTURO

WE WOULD LIKE TO THANKS YOU FOR CHOOSING UFESA, WE WISH THE PRODUCT PERFORMS TO YOUR SATISFACTION AND PLEASURE.

IMPORTANT WARNING: KEEP IT FOR FUTURE USE

PLEASE READ THE INSTRUCTIONS FOR USE CAREFULLY PRIOR TO USING THE PRODUCT. STORE THESE IN A SAFE PLACE FOR FUTURE REFERENCE.

DESCRIPTION

  1. Heating pad
  2. Control
  3. Slider switch 0-1-2-3 position
  4. Temperature level indicator

SAFETY INSTRUCTIONS

Prior to plugging in the product, check that your mains voltage is the same as the one indicated on the product label. Children under the age of three should not use this appliance due to their inability to react to overheating.

This product can be used by children aged 8 and older and anyone with reduced physical, sensory or mental abilities or lack of experience and knowledge, while under the supervision of an adult or that are directed on how to use it safely and who understand the dangers.

The device must not be used by children from 3 to 8 years of age unless the controls have been preset by a parent or guardian, or the child has

been at least properly instructed on how to use the controls in a secure manner.

Children must not play with the product. Children should not clean or carry out maintenance without supervision.

This product should not be used by people insensitive to heat and other highly vulnerable people who are unable to react to overheating.

When the product is to be used for an extended period of time, such as when sleeping, the controls should be adjusted with temperature level 1 for continuous use.

This device is not intended for medical use in hospitals.

The product can only be used with the 24125 (Flexy-Heat LM) 24130 (Flexy-Heat NC / NCD) model regulator.

Examine the product on a frequent basis for signs of wear or damage. If there are any signs or if the appliance has been used improperly or is not working, contact an authorized service centre prior to reconnecting it.

If the cord is damaged, do not use the product. The product must be taken to an authorized service centre for repair, otherwise, the product will have to be discarded.

Do not use the product if it is wet or damp. Never

immerse the remote control in water. Dry the product prior to use if it shows any signs of moisture.

This device is designed for use at a maximum altitude up to 2000m above sea level.

IMPORTANT WARNINGS

The mains connection cable must not be tangled or wrapped around the product during use.

Do not pull on the cable to unplug it or use it to carry the product. Do not wrap the cable around the control.

Do not cover or lay the control on top of the regulator control during use in order to ensure its proper operation.

Do not cover the product with any heavy or thick objects and do not place on top of any other heating elements.

Use without folding.

Do not stick any pins or needles or any other pointy metal objects into the product.

Proceed according to the conservation section of this manual for cleaning.

Do not use the product to warm up animals.

Materials will suffer wear and tear over time and after prolonged use. Unplug the product immediately from the mains in the event of any breakdown and contact an authorised Technical support service.

In order to prevent any risk of danger, do not open the remote control or the connection. Only qualified technical personnel from the brand's Official Technical support service may carry out repair or procedures on the device.

Any incorrect use or improper handling of the product shall render the warranty null and void. Only an authorised technical support service centre may carry out repairs on the product.

B&B TRENDS SL. disclaims all liability for damages that may occur to people, animals or objects, for the non-observance of these warnings.

INSTRUCTIONS FOR USE

Prior to connecting the product to the mains, check your power supply voltage to ensure it is the same as the one indicated on the label included on the product. Connect the product to the appropriate mains.

In order to turn on the product, you must select the slider switch on the control, setting it to position 1, 2 or 3 (Fig.1).

From this time on, the product is operational.

The maximum operation time is 90 minutes, after which the automatic safety shut-down will immediately activate. The product will no longer heat up when in this state.

To turn on the product again, set it to position "0" and select the desired temperature.

Select the "0" position in order to turn off the product before you disconnect the device from the mains.

The pad models NC and NCD have been specially designed as an effective system to relax the muscles of the neck and cervical vertebrae (NC), as well as the muscles of the upper part of the back and dorsal vertebrae (NCD) which are the areas most frequently subjected to muscular tension.

The NC model sits around the rear of the neck, adjusting the fix button on the product, so that it sits approximately under the chin (Fig. 2). The NCD model is placed at the top of the back just like the previous model. Its lower section adapts to the waist, and the snap lock can be adjusted in advance to the required length to be placed around the navel area. (Fig. 3)

The lumbar-menstrual pad has an ambivalent design especially adapted for the application of heat in the abdominal area and the lumbar region. The LM model is positioned by adjusting the product to the lumbar area using the velcro system (Fig. 4).

TROUBLESHOOTING GUIDE

Possible operational problems

PROBLEM RECOMMENDATION
The regulator control does not light up whenEnsure that the regulator is properly connected to the pro- duct and that there is voltage in the socket of the mains used and that the product is properly plugged in.
After a certain operation time, the product temperature seems to reduce.The product has an auto-stop system that activates after 90 minutes of continuous operation. After this time, the light on the regulator starts to flash. If you want to continue to use it, change the temperature level to level 0, wait a few seconds, and then select the desired temperature.

PRODUCT DISPOSAL AND CONSERVATION PRODUCT CONSERVATION

Unplug the product when you do not intend to use it for an extended period of time to prolong its shelf-life. Prior to storing the product, allow it to cool before folding, keep it in its original packaging in a dry location with the fewest possible folds, without placing any objects on top.

PRODUCT CLEANING

Unplug and remove the regulator prior to cleaning the product. All parts of the product, apart from the regulator control, can be washed by hand or in the machine using liquid soap at a temperature not exceeding 30 °C and selecting a program for washing delicate garments. We recommend using a washing bag to prevent the closure of the sleeve becoming tangled with other clothing.

PRODUCT DISPOSAL

UFESA Flexy-Heat NCD Complex - PRODUCT DISPOSAL - 1

Do not dispose of the product at the end of its shelf-life. Contact the organic collection centre closest to your home in accordance with the waste electrical and electronic equipment (WEEE) Directive 2012/19/EU to contribute to the protection of the environment. Request detailed information regarding their current methods of disposing of packaging and scrappage of used devices from your distributor.

We hope that you will be satisfied with this product.

NOUS VOUS REMERCIONS D'AVOIR CHOISI UFESA, NOUS SOUHAITONS QUE CE PRODUIT VOUS APPORTE SATISFACTION ET QUE VOUS AYEZ PLAISIR À L'UTILISER.

INSTRUCTIONS IMPORTANTES: À CONSERVER POUR UNE UTILISATION ULTÉRIEURE

LIRE ATTENTIVEMENT LA NOTICE AVANT D'UTILISER LE PRODUIT. LA CONSERVER DANS UN ENDROIT SÛR POUR LA CONSULTER ULTÉRIEUREMENT.

DESCRIPTION

CONSERVATION ET MISE AU REBUT DU PRODUIT CONSERVATION DU PRODUIT

MISE AU REBUT DU PRODUIT

UFESA Flexy-Heat NCD Complex - MISE AU REBUT DU PRODUIT - 1

B&B TRENDS, SL. guarantees compliance of this product, for the use for which it is, during the period established by the legislation in force in the country of sale. In the case of breakdown during the term of this warranty, users are entitled to repair or else the replacement of the product at no charge if the former is unavailable, unless one of these options proves impossible to fulfil or is disproportionate. In this case, you can then opt for a reduction in price or cancellation of the sale, which must be dealt with directly with the sales vendor. This also covers replacement of spare parts provided that the product has been used according to the recommendations specified in this manual for both cases, and has not been tampered with by any third party that is not authorised by B & B TRENDS, SL. The warranty will not cover any parts subject to wear and tear. This warranty does not affect your rights as a consumer in accordance with the provisions in Directive 1999/44/EC for member states of the European Union.

USE OF WARRANTY

Customers must contact a B&B TRENDS, SL., authorised Technical Service for repair of the product. Since any tampering of the same by anyone not authorised by B&B TRENDS, SL., or the careless or improper use of the same shall render this warranty null and void.

You must keep the purchase invoice, receipt or delivery docket in order to exercise your warranty rights.

For technical service and after-sales care outside the Spanish territory, please submit your query to the point of sale where you purchased the item.

BON DE GARANTIE

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : UFESA

Model : Flexy-Heat NCD Complex

Category : Heated blanket/cushion