BCD992 - Food Warmers HomeCraft - Free user manual and instructions

Product Type	Three-section buffet server with heating plate (chafing dish)
Brand	HomeCraft
Model	BCD992
Tray Capacity	3 removable trays of 2.5 quarts each (approximately 1.18 L)
Material	Stainless steel (base, trays, lids)
Power Supply	120 V AC, polarized plug (standard outlet)
Adjustable Temperature	Yes, thermostat with 3 positions: Low (130-150°F / 54-65°C), Medium (150-165°F / 65-74°C), High (165-185°F / 74-85°C)
Indicator Light	Yes, lights up when the unit is plugged in
Handles	Heat-resistant side handles
Lids	With spoon slots
Recommended Use	Keeping food warm (no prolonged reheating beyond 3-4 hours)
Cleaning	Trays, lids and frame hand washable in warm soapy water; base wiped with a non-abrasive cloth; do not immerse base, do not use abrasive pad, do not put in dishwasher
Safety	Hot surface: do not touch during use; use oven mitts; never use the appliance upside down; do not leave unattended; unplug after use
Warranty	1 year from date of purchase (defects in material and workmanship, normal household use)
Customer Service	Nostalgia Products: www.nostalgiaproducts.com, phone [phone] (Mon-Fri 8am-5pm CST)

Frequently Asked Questions - BCD992 HomeCraft

How to assemble the buffet server?

Place the heating base on a flat, stable surface. Place the frame on the base, then insert the three stainless steel trays into the frame. Place the lids on the trays. Make sure the appliance feet rest firmly on the table or counter.

What is the required electrical power?

The appliance operates on a standard 120 V AC household outlet with a polarized plug. An extension cord may be used if its electrical ratings are at least equal to those of the appliance.

How to adjust the temperature?

Turn the temperature control knob to the desired setting: Low (130-150°F / 54-65°C), Medium (150-165°F / 65-74°C) or High (165-185°F / 74-85°C). The indicator light turns on when the appliance is plugged in.

Can I use plastic dishes on the warmer?

No, do not use plastic dishes or plastic wrap on the warmer. Only oven-safe dishes or heat-resistant containers should be placed directly on the hot surface.

How to clean the buffet server?

Let the appliance cool completely. Remove the trays, lids, and frame. Hand wash these parts in warm soapy water, rinse, and dry. Wipe the warmer base with a non-abrasive sponge or cloth. Never use an abrasive pad and do not put any parts in the dishwasher.

Why is there smoke during first use?

It is normal to see some smoke or a slight odor during first use. This will disappear after a few minutes of preheating. Let the appliance heat empty until the smoke stops.

Can I leave the appliance on unattended?

No, never leave the appliance unattended while operating. Always unplug it after use and before cleaning.

What is the maximum holding time?

Food can be kept warm for a maximum of 3 to 4 hours. Beyond that, they may dry out or lose flavor. It is recommended to check food temperature with a thermometer.

What to do if the appliance does not heat?

Check that the appliance is properly plugged into a working outlet. Make sure the temperature knob is set to a position other than 'off'. If the problem persists, contact Nostalgia Products customer service.

Where to find suitable recipes for this buffet server?

The manual suggests ideas such as a dessert bar (ice cream, hot toppings), a taco/nacho party with hot and cold toppings, or appetizers (vegetables, fruits, spring rolls). Be creative by adapting your favorite dishes.

USER MANUAL BCD992 HomeCraft

All products are trademarks of Nostalgia Products LLC. Worldwide design & utility patented or patents pending. © 2016 Nostalgia Products LLC.

www.nostalgiaproducts.com

(rev.11/14/16 YD)

Make every day a party! Visit www.nostalgiaproducts.com for more fun products.

CONTENTS

SAFETY 2
IMPORTANT SAFEGUARDS 3
ADDITIONAL IMPORTANT SAFEGUARDS 3
INTRODUCTION 4
PARTS & ASSEMBLY 5
HOW TO OPERATE 6
HELPFUL TIPS 7
CLEANING & MAINTENANCE 7
RECIPES 7
RETURNS & WARRANTY 8

SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can cause serious injury to you and others.

All safety messages will follow the safety alert symbol.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

Appliance Specifications:

120 Volts, 60 Hz, 300 Watts

THIS PRODUCT IS FOR USE IN 120V AC OUTLET ONLY.

Refer to www.nostalgiaproducts.com/user-manuals/ for the most updated manual.

Intertek

IMPORTANT SAFEGUARDS

A person who has not read and understood all operating and safety instructions is not qualified to operate this appliance. All users of this appliance must read and understand this Instruction Manual before operating or cleaning this appliance.

When using electrical appliances, basic safety precautions should always be followed, including:

1. Read all instructions before operating this appliance.
2. DO NOT TOUCH the hot surfaces. Use handles or knobs. Always use hot pads or potholders until unit cools.
3. This appliance is NOT A TOY.
4. Unsupervised young children and cognitively challenged individuals should never operate this appliance.
5. Close supervision is necessary when any appliance is used by or near children.
6. To protect against electrical shock do not immerse cord, plug or any part of this appliance in water or other liquids.
7. Unplug from outlet when not in use, before removing parts and before cleaning. Allow to cool before putting on or taking off any parts, and before cleaning.
8. DO NOT operate any appliance with a damaged cord or plug, or after the appliance malfunctions, or if the appliance has been damaged in any manner. Return the appliance to the nearest repair shop for examination, repair or adjustment.
9. The manufacturer does not recommend the use of accessory attachments other than what is provided by the manufacturer. Use of attachments may cause injuries.
10. DO NOT use the appliance for other than its intended use.
11. DO NOT use outdoors. FOR HOUSEHOLD USE ONLY.
12. DO NOT place on or near a hot gas or electric burner, or in a heated oven.
13. DO NOT let cord hang over edge of table or counter, or touch hot surfaces.
14. NEVER leave unit unattended while in use or when plugged into an outlet.
15. Extreme caution must be used when moving an appliance containing hot food.
16. Always attach plug to appliance first, then plug cord in the wall outlet. To disconnect, turn any control to "off," then remove plug from wall outlet.

ADDITIONAL IMPORTANT SAFEGUARDS

Operating Safety Precautions

1. Always be sure the feet of the Warming Tray are resting on a table or countertop. Using the appliance upside down may cause fire or burns.
2. DO NOT use plastic dishes or plastic wrap on Warming Tray.

Instructions for the Electrical Cord and Plug

1. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electrical shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.

2. A short power supply cord is provided to reduce the risk resulting from becoming entangled or tripping over a long cord.

3. If a long detachable power-supply cord or extension cord is used:

4. Extension cords can be used if care is exercised in their use.

5. The marked electrical rating of the cord or extension cord should be at least as great as the electrical rating of the appliance.

6. When using a longer cord or extension cord, make sure that the cord does not drape over a countertop or tabletop where it can be pulled on or tripped over unintentionally.

7. The manufacturer does not recommend using this machine in countries that do not support 120V AC even if a voltage adapter, transformer, or converter is in use.

SAVE THESE INSTRUCTIONS!

INTRODUCTION

Congratulations on your purchase of the 3-STATION STAINLESS STEEL BUFFET SERVER & WARMING TRAY! Great for any special event, this 3-section buffet-style food server is perfect for entertaining large group in style. Featuring three 2.5-quart stainless steel trays, the stainless steel base doubles as a warming tray. An adjustable heat control allows food to stay at the perfect temperature, while the stay-cool handles make moving easy.

Features Include:

3 (2.5 quart) removable stainless steel trays
- Stainless steel base doubles as warming tray
Adjustable heat control
- Stay-cool side handles
Lids with spoon slots

PARTS & ASSEMBLY

Your 3-STATION STAINLESS STEEL BUFFET SERVER & WARMING TRAY should be put together as shown below. Be sure to remove all packing materials and protective coverings before assembly.

NOTE: When using the Warming Tray, be sure the feet of the unit are resting on a table or countertop. Fire hazard or burns may occur if unit is used upside down.

TEMPERATURE CONTROL KNOB and INDICATOR LIGHT

Turn Counterclockwise: LOW (130° - 150° F)
Middle: MED (150°-165°F)
Turn Clockwise: HIGH (165° - 185° F)

HOW TO OPERATE

BUFFETSERVER

1. Assemble unit as shown under PARTS & ASSEMBLY. Plug unit into an electrical outlet, which will illuminate the Indicator Light.
2. Place food into each one of the trays.
3. Adjust the Temperature Control Knob to desired heat for your food contents. Choose temperature settings:

Low temperature is 130^ - 150^ Fahrenheit
Middle temperature is 150^ - 165^ Fahrenheit
High temperature is 165^ - 185^ Fahrenheit

1. The food trays can keep foods hot for a long period of time, but it is not recommended to exceed 3 to 4 hours. After that point, the foods begin to dry out and/or the flavor begins to change.
2. Do not leave food in trays. Remove food and liquid for easy clean up and preparation for next use.
3. Allow the unit to cool down before putting on or taking off parts for cleaning.

WARMING TRAY

1. Remove the Frame, Cooking Pans and Lids, and then set the Warming Tray on a table or countertop.

NOTE: Be sure the feet of the Warming Tray are resting on a table or countertop. Fire hazard or burns may occur if unit is used upside down.

1. Plug unit into an electrical outlet, which will illuminate the Indicator Light.
2. Adjust the Temperature Control Knob to desired heat for your food contents. Choose temperature settings:

Low temperature is 130^ - 150^ Fahrenheit
Middle temperature is 150^ - 165^ Fahrenheit
High temperature is 165^ - 185^ Fahrenheit

1. Place your vessels of food directly on the surface of the warming tray for warming. It is not recommended to warm foods in exceed of 3 to 4 hours. After that point, the foods begin to dry out and/or the flavor begins to change.

NOTE: Do not place the Lids or any other non-heat proof items directly on the hot surface of the warming tray.

1. Unplug unit from electrical outlet when not in use.

HELPFUL TIPS

NEVER leave the unit unattended while operating.

SMOKING

During first use, you may notice slight smoking or a slight odor; this is normal with most new appliances. Allow the appliance to preheat until smoke and odor no longer exists.

SERVING TEMPERATURE

For best results, use the unit at the maximum temperature setting to quickly reach the desired temperature, then adjust the Temperature Control Knob. Serving temperature is from 140^ minimum - 165^ maximum (60°C minimum - 75°C maximum).

All foods have different consistencies so depending on what is being served, you may need to adjust the temperature lower or higher to maintain a minimum temperature of 140^ (60^)

It is recommended to periodically check the temperature of food with a food thermometer while serving.

CLEANING & MAINTENANCE

Please take care of your 3-STATION STAINLESS STEEL BUFFET SERVER & WARMING TRAY by following these simple instructions and precautions.

• Allow the unit to cool completely, then remove the Cooking Pans, Lids and Frame. These items can be submerged in soapy water. Rinse well and wipe dry.
• Wipe the Warming Tray base unit with a dry, non-abrasive cloth or sponge to remove food and liquid, preparing your buffet for the next use.
  NEVER use an abrasive sponge, cloth or scouring pad on this unit as it will damage the stainless steel construction.
  NEVER place any parts in the dishwasher. Always wash by hand.
• If there is any breakdown or damage, the appliance must be repaired by authorized technicians. Non-authorized technicians are not permitted to dismantle the appliance.

RECIPES

With the 3-STATION STAINLESS STEEL BUFFET SERVER & WARMING TRAY you can enjoy a variety of meals and serve guests with style! Here are some great ideas for ways you can use your 3-STATION STAINLESS STEEL BUFFET SERVER & WARMING TRAY:

- DESSERT BAR

Place your choice of ice cream in each of the three covered trays and place over ice. Place hot fudge, caramel and strawberry toppings inside of oven-safe bowls and place bowls on the Warming Tray to keep warm.

THEMED PARTY FOODS

Have a taco night or nacho night and fill each station of the Buffet with hot toppings and fillings like refried beans, rice, meat or nacho cheese. Alternately, you can take out the stations of the Buffet and fill with cold ingredients like sour cream, salsa and guacamole and then put hot ingredients in oven-safe bowls and place on the Warming Tray to keep warm.

For fun finger foods, put cold finger foods like cut up vegetables and fruit in the stations of the Buffet and put hot finger foods like egg rolls and sausages in bowls or oven-safe dishes and place on Warming Tray to keep warm.

With a little imagination, you can come up with special uses for your buffet. Be creative and enjoy!

RETURNS & WARRANTY

SHOULD YOUR UNIT NOT WORK OR IF DAMAGED WHEN YOU FIRST TAKE IT OUT OF THE BOX, PLEASE RETURN IT TO THE PLACE OF PURCHASE IMMEDIATELY.

3-STATION STAINLESS STEEL BUFFET SERVER & WARMING TRAY / BCD992

Should you have any questions, please contact us via email or at the customer service number listed below between the hours of 8:00 AM and 5:00 PM, Monday through Friday, Central Standard Time.

Distributed by:

Nostalgia Products LLC

1471 Partnership Dr.

Green Bay, WI 54304-5685

Customer Service

Phone: [phone]

Web: www.nostalgiaproducts.com

Customer Service Inquiry

To submit a Customer Service inquiry, go to www.nostalgiaproducts.com and fill out the Customer Service Inquiry form and click the Submit button.

A representative will contact you as soon as possible.

Product Warranty Terms

Nostalgia Products LLC (the "Company") hereby warrants that for a period of one (1) year from the date of original purchase, this product will be free of defects in material and workmanship under normal home use, provided that the product is operated and maintained in accordance with the operating instructions. As the sole and exclusive remedy under this warranty, the Company will at its discretion either repair or replace the product found to be defective, or issue a refund on the product during the warranty period. This warranty is only available to the original retail purchaser of the product from the date of initial retail purchase, and is only valid with the original sales receipt, as proof of purchase date is required to obtain warranty benefits. All warranty claims must be brought to the attention of the Company within the warranty period and no later than 30 days of the failure to perform. This warranty does not cover normal wear or damage caused by shipping, mishandling, misuse, accident, alteration, improper replacement parts, or other than ordinary household use. You may be required to return the product (with shipping prepaid by you) for inspection and evaluation. Return shipping costs are not refundable. The Company is not responsible for returns damaged or lost in transit. Unless otherwise specifically permitted by the operating instructions, this warranty applies to indoor household use only. In order to obtain service under this warranty, please contact the Company at the telephone number listed above or by filling out the Customer Service Inquiry Form located at www.nostalgiaproducts.com. Warranty valid only in USA and Canada.

This warranty is in lieu of all other warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose, which are hereby excluded to the extent permitted by law. In no event shall the Company be liable for any indirect, incidental, consequential, or special damages arising out of or in connection with this product or the use thereof. Some states, provinces or jurisdictions do not permit the exclusion or limitation of incidental or consequential damages, so the foregoing exclusion or limitation may not apply to you.

This warranty does not apply to re-manufactured merchandise.

Please read the operating instructions carefully. Failure to comply with the operating instructions will void this warranty.

For more information, visit us online at www.nostalgiaproducts.com.

Like us on Facebook at www.facebook.com/NostalgiaElectrics.

Follow our boards on Pinterest at www.pinterest.com/nostalgiaelctrlx.

Tweet along with us on Twitter at www.twitter.com/NostalgiaElctrx.

120 Volts, 60 Hz, 300 Watts

CE PRODUIT EST UTILISÉ DANS SORTTE ÉLECTRIQUE DE 120V AC SEULEMENT.

CONSERVEZ CES INSTRUCTIONS! INTRODUCTION

Nostalgia Products LLC

1471 Partnership Dr.

Green Bay, WI 54304-5685

120 Volts, 60 Hz, 300 Watts

ESTE PRODUCTO ES PARA USO EN SALIDA 120V AC SOLAMENTE.

Nostalgia Products LLC 1471 Partnership Dr.

Green Bay, WI 54304-5685

Servicio al cliente

Telefono: [phone]

Web: www.nostalgiaproducts.com