304952 - Battery charger Aplic - Free user manual and instructions

Brand	Aplic
Model	304952
Product type	Battery charger
Number of compartments	2 bays
Input voltage	5 V DC / 2 A
Compatible batteries	LP-E6N (7.2 V, 2000 mAh)
Display	Backlit LC screen with 4 progress bars (25% each)
Protection	Polarity reversal protection
Package contents	Charger, 50 cm USB cable, 2 LP-E6N batteries, user manual
Power supply	5 V USB port (computer, mains adapter, external battery)
Cleaning and care	Wipe with a soft dry cloth; do not use harsh cleaners
Safety	Do not open, do not short-circuit, use in dry conditions, avoid moisture and high temperatures
Disposal	Compliant with WEEE (Directive 2012/19/EU); do not dispose of with household waste
Manufacturer	WD Plus GmbH, Wohlenbergstraße 16, 30179 Hanover, Germany
WEEE registration number	DE 67896761

Frequently Asked Questions - 304952 Aplic

What types of batteries can I charge with this charger?

This charger is designed for LP-E6N batteries (7.2 V, 2000 mAh). Do not attempt to charge other battery models.

How do I know if the battery is charging?

The LC screen displays a battery symbol with four bars. A flashing bar means charging is in progress. A continuously lit bar indicates that charge level has been reached. When all four bars are continuously lit, charging is complete.

Can I use an external power source (power bank)?

Yes, you can use an external battery or a USB mains adapter providing 5 V / 2 A (or a standard computer USB port).

How long does it take to charge a battery?

Charging time depends on the battery's condition. The charger does not indicate a precise duration, but the visual progress via the bars allows you to track advancement (each bar represents approximately 25% charge).

What should I do if the screen does not light up?

Check that the USB cable is properly connected and that the power source delivers 5 V. Also ensure the batteries are inserted in the correct orientation.

Can I leave the batteries in the charger after charging?

It is recommended to remove the batteries once charging is complete to avoid any discharge or overheating. The charger does not have an automatic hold function.

How to clean the charger?

Unplug the charger and wipe it with a soft dry cloth. Do not use harsh cleaners or liquids.

Is the charger protected against short circuits?

Yes, the charger features polarity reversal protection that prevents damage to the device in case of incorrect battery insertion.

Can I charge non-compatible batteries?

No, using non-compatible batteries may damage the charger and batteries. Use only the recommended LP-E6N models.

How to dispose of the charger at end of life?

Do not dispose of the device with household waste. In accordance with WEEE Directive 2012/19/EU, take it to a collection point or return it to the retailer for proper recycling.

USER MANUAL 304952 Aplic

Blue abstract logo shape resembling a stylized letter 'Q' or partial circle (no text or symbols)

aplic

BATTERY CHARGER

Thank you for choosing an aplic product. To ensure that you will enjoy your purchased device for a long time, please read the following user manual carefully. Before using the delivered product, please check that it is complete, faultless and undamaged.

1. Scope of delivery

• 2-slot battery charger
• 50 cm USB charging cable and 2x batteries
• User manual

2. Technical data

Operating voltage 5V DC /	2A
Compatible battery types LP-E6N (7.2 V, 2000 mAh)
Modes Charge (loading)
Features • LC-Display (shows progress visually in four bars of 25% steps each)• LC-Display with backlight• Battery reverse polarity protection

3.Start-up

Check the integrity of the product and its function again when the device is first put into operation. Remove the device from its packaging and remove all packaging material. Connect the charger to a 5V USB port of a computer, to a 5V / 2A DC USB power adapter or power bank using the supplied connection cable. Then you can insert LP-E6N batteries into the charger.

The large, easy-to-read display shows information such as the current charge level of the respective slot visually in form of a battery symbol with four charging bars (1x bar \~ 25%). A flashing bar means that the charging process is active. A permanently lit bar indicates that the charge level has been reached. If the charging process is terminated in a battery compartment, this is indicated by a battery symbol with four permanently displayed full bars.

4. Cleaning and care

Disconnect the device from the power supply and make sure that it is voltage-free. Wipe it with a dry soft cloth. Please do not use aggressive cleaning agents.

5. Safety instructions and liability disclaimer

Never try to open the device to carry out repairs or conversions. Avoid contact with mains voltages. Do not short-circuit the product. The device is not certified for use in the open air; only use it in dry conditions. Protect it from high humidity, water and snow. Keep it away from high temperatures. Do not subject the device to sudden changes in temperature or heavy vibration as this might damage electronic components. Examine the device for damage before using it. The unit should not be used if it has received an impact or has been damaged in any other way. Please observe national regulations and restrictions. Do not use the device for purposes other than those described in the instructions. This product is not a toy. Keep it out of the reach of children or mentally impaired persons. Any repair or alteration to the device not carried out by the original supplier, will invalidate the warranty or guarantee. The product may only be used by persons who have read and understood these instructions. The device specifications may change without any separate prior notice to this effect.

6. Disposal instructions

Electrical and electronic devices may only be disposed of in accordance with the European WEEE Directive and not with household rubbish. Components must be disposed of or recycled separately as dangerous, toxic elements can inflict sustained damage on the environment if they are disposed of incorrectly. As a consumer, you are bound by the Electrical and Electronic Devices Act (ElektroG) to return electrical and electronic goods free of charge at the end of their useful life to the manufacturer, the place of purchase or to specially set up, public collection points. The details in each case are governed by national law. The symbol on the product, the operating instructions and/or the packaging refers to these regulations. By separating materials in this way, recycling and disposing of old devices, you are making an important contribution towards protecting our environment.

WEEE guideline: 2012/19/EU

WEEE register number: DE 67896761

WD Plus GmbH hereby declares that the 304952/20200831SZ264 is in compliance with the essential requirements and other relevant regulations. A complete Declaration of Conformity can be obtained from WD Plus GmbH, Wohlenbergstraße 16, 30179 Hannover