304883 - Network card / adapter Aplic - Free user manual and instructions

Product Type	USB 3.0 WLAN Adapter (Wireless Network Card)
Brand	Aplic
Model	304883
Interface	USB 3.2 Gen1 (backward compatible with USB 2.0/1.1)
Chipset	Realtek RTL8812BU
Frequency Bands	2.4 GHz and 5 GHz
Maximum Data Rate	Up to 866 Mbit/s (5 GHz) / 400 Mbit/s (2.4 GHz)
Supported Wi-Fi Standards	IEEE 802.11 a/b/g/n/ac
Maximum Transmit Power (EIRP)	14 dBm
Antenna	External detachable antenna included
Supported Operating System	Windows (drivers provided on CD)
Approximate Dimensions	2.0 × 1.0 × 0.5 cm (without antenna)
Approximate Weight	20 g (with antenna)
Power Supply	Via USB port (5 V)
Power Consumption	Low (max 2.5 W)
Maintenance and Cleaning	Wipe with a soft dry cloth. Do not use liquids.
Safety	Do not open, do not expose to water or high temperatures.
Spare Parts / Repairability	Not user serviceable. No spare parts available.
General Information	Compliant with directive 2014/53/EU. WEEE number: DE 67896761.

Frequently Asked Questions - 304883 Aplic

How to install the Aplic 304883 WLAN adapter?

Insert the driver CD, then plug the adapter into a USB 3.0 port. Run Setup.exe from the CD and follow the installation wizard.

What to do if my computer does not recognize the adapter?

Make sure you have installed the drivers from the CD. If the problem persists, download the latest drivers from http://downloads.ganzeinfach.de/search/model/304883.

Does the adapter work with Windows 10 or 11?

Yes, the provided CD contains drivers for Windows. If automatic installation fails, try the generic Realtek RTL8812BU driver or the latest driver from the website.

How to use the 5 GHz band?

Once the drivers are installed, connect to a 5 GHz Wi-Fi network. If issues occur, update the driver with the latest version.

Is the antenna mandatory?

Yes, screw on the provided antenna before use. Without antenna, range and speed will be greatly reduced.

What is the actual maximum speed?

The theoretical speed reaches 866 Mbit/s on 5 GHz and 400 Mbit/s on 2.4 GHz, but it depends on interference and distance to the router.

Can I use this adapter on a Mac?

The provided drivers are for Windows. For macOS, you may need to find a third-party driver compatible with the Realtek RTL8812BU chipset.

What to do if the 5 GHz connection is unstable?

Try updating the driver. You can also download the latest driver from the website http://downloads.ganzeinfach.de/search/model/304883.

Is the adapter compatible with WiFi 6 routers?

Yes, it is compatible with WiFi 6 (802.11ax) routers but will operate in 802.11ac (WiFi 5) mode with a speed limited to 866 Mbit/s.

How to recycle the adapter at end of life?

Do not throw it in household waste. Dispose of it at a WEEE collection point or return it to the manufacturer in accordance with directive 2012/19/EU.

USER MANUAL 304883 Aplic

Blue abstract logo shape resembling a stylized letter 'Q' or partial circle (no text or symbols)

aplic

USB 3.2 Gen1 WLAN Adapter

1300 Mbit, 2.4/5GHz

Mod.-Nr.: 304883

Table of contents

1. Deutsch .... 3
2. English 6
3. Italiano 9
4. Español....12
5. Français 15

Thank you for having chosen this aplic product and for placing your trust in our company. Please read this manual carefully before installation to ensure your long-term enjoyment of this product. For future reference, please keep this manual. Before using the delivered product, check that it is complete, faultless and undamaged.

1. Scope of delivery

• USB 3.2 Gen1 WLAN adapter
- Driver CD
- User manual

2. Technical data

Port USB 3.2 Gen1 (backward compatible)
Data rate	• IEEE 802.11 b/g/n/h/ac: up to 866Mbit/s*2.4 GHz - max. 400 Mbit/s5 GHz - max. 866 Mbit/s* Transmission rate varies depending on the distance and external interferences
Chipset Realtek RTL 8812BU
Radio spectrum 2,4 GHz / 5 GHz
Frequency range • 2400-2483 GHz• 5150-5825 GHz
Maximum transmission power (EIRP)	14 dBm

3. Driver installation

If the driver is not installed automatically, you have to install the driver which is located on the CD.

Insert the driver CD into the drive and plug the wireless adapter into a free USB 3.2 Gen1 port (or lower) of your computer. Navigate to the contents of the driver CD and start with the file setup.exe.

Please confirm the following security note with „yes“.

Then the installation wizard will start. Follow the installation wizard and finish the installation.

Note: If there are problems with 5 GHz frequency band connection, we recommend to use the latest driver from our website http://downloads.ganzeinfach.de/search/model/304883.

4. Safety instructions and liability disclaimer

Never try to open the device to carry out repairs or conversions. Avoid contact with mains voltages. Do not short-circuit the product. The device is not certified for use in the open air; only use it in dry conditions. Protect it from high humidity, water and snow. Keep it away from high temperatures. Do not subject the device to sudden changes in temperature or heavy vibration as this might damage electronic components. Examine the device for damage before using it. The unit should not be used if it has received an impact or has been damaged in any other way. Please observe national regulations and restrictions. Do not use the device for purposes other than those described in the instructions. This product is not a toy. Keep it out of the reach of children or mentally impaired persons. Any repair or alteration to the device not carried out by the original supplier, will invalidate the warranty or guarantee. The product may only be used by persons who have read and understood these instructions. The device specifications may change without any separate prior notice to this effect.

5. Disposal instructions

Electrical and electronic devices may only be disposed of in accordance with the European WEEE Directive and not with household rubbish. Components must be disposed of or recycled separately as dangerous, toxic elements can inflict sustained damage on the environment if they are disposed of incorrectly. As a consumer, you are bound by the Electrical and Electronic Devices Act (ElektroG) to return electrical and electronic goods free of charge at the end of their useful life to the manufacturer, the place of purchase or to specially set up, public collection points. The details in each case are governed by national law. The symbol on the product, the operating instructions and/or the packaging refers to these regulations. By separating materials in this way, recycling and disposing of old devices, you are making an important contribution towards protecting our environment.

WEEE guideline: 2012/19/EU WEEE register number: DE 67896761

WD Plus GmbH, herewith declares that this product 304883 conforms to the principle requirements and other relevant stipulations of Directive 2014/53/EU. The complete Declaration of Conformity can be obtained from: WD Plus GmbH, Wohlenbergstraße 16, 30179 Hanover, http://downloads.ganzeinfach.de/search/model/304883