301665 - Battery charger CSL - Free user manual and instructions

USER MANUAL 301665 CSL

Thank you for having chosen this CSL product and for placing your trust in our company. Please read this manual carefully before installation to ensure your long-term enjoyment of this product. For future reference, please keep this manual.

1. Scope of delivery

• Gamepad charging station
- miniUSB cable
- Power supply
- Dock adapter for PS4 Gamepads
- User manual

2. Technical specifications

Input voltage 5V DC / 2A
Output voltage 5V DC / 500mA
Compatible Gamepads • PS4 Wireless Gamepad• PS3 Wireless Gamepad• PS3 Move Gamepad

3. Functions

With the CSL gamepad charging station it is easy to charge PS3/PS4 controllers simultaneously. The status LEDs on the charging station indicate the charging status.

4. Starting up

Take the device out of package and remove all packing material. Then you have to connect the miniUSB cable with a power supply or on a free USB port and the gamepad charging station. Following this, the charging station is ready for use. Connect your desired gamepad with the charging station. If you would like to charge PS4 gamepads, it is necessary to put on the enclosed PS4 adapter on the ports of the charging station. When replacing the controller and the adapter, please ensure that the contact jacks lie on top.

5. LED status display

Status LED Meaning
LED lights red Charging
LED lights green Fully charged

Note: One cannot rule out the possibility that the charging status may be incorrect or may not be displayed if you use non-original gamepads. But it does not affected the charging of the gamepads.

ATTENTION!

6. Safety instructions and liability disclaimer

Never try to open the device to carry out repairs or conversions. Avoid contact with mains voltages. Do not short-circuit the product. The device is not certified for use in the open air; only use it in dry conditions. Protect it from high humidity, water and snow. Keep it away from high temperatures. Do not subject the device to sudden changes in temperature or heavy vibration as this might damage electronic components.

Examine the device for damage before using it. The unit should not be used if it has received an impact or has been damaged in any other way. Please observe national regulations and restrictions. Do not use the device for purposes other than those described in the instructions. This product is not a toy. Keep it out of the reach of children or mentally impaired persons. Any repair or alteration to the device not carried out by the original supplier, will invalidate the warranty or guarantee. The product may only be used by persons who have read and understood these instructions. The device specifications may change without any separate prior notice to this effect.

7. Disposal instructions

Electrical and electronic devices may only be disposed of in accordance with the European WEEE Directive and not with household rubbish. Components must be disposed of or recycled separately as dangerous, toxic elements can inflict sustained damage on the environment if they are disposed of incorrectly.

As a consumer, you are bound by the Electrical and Electronic Devices Act (ElektroG) to return electrical and electronic goods free of charge at the end of their useful life to the manufacturer, the place of purchase or to specially set up, public collection points. The details in each case are governed by national law.

The symbol on the product, the operating instructions and/or the packaging refers to these regulations. By separating materials in this way, recycling and disposing of old devices, you are making an important contribution towards protecting our environment./

WEEE guideline: 2012/19/EU

WEEE register number: DE 67896761

WD Plus GmbH, herewith declares that this product 301665/20200309SZ117 conforms to the principle requirements and other relevant stipulations. The complete Declaration of Conformity can be obtained from: WD Plus GmbH, Wohlenbergstraße 16, 30179 Hanover