301487 - Night lamp Brandson - Free user manual and instructions
Find the device manual for free 301487 Brandson in PDF.
| Product type | LED night light with integrated socket |
| Brand | Brandson |
| Model | 301487 |
| Power supply | 230 V AC, 50 Hz |
| Maximum socket power | 3680 W (max.) |
| Protection type | IP20 |
| Operating temperature | 0 to 40 °C |
| Number of colors | 3 (green, blue, white) |
| Brightness sensor | Yes (dusk sensor) |
| Sensor sensitivity adjustment | Yes (by rotating the sensor) |
| Color switching | Rotary ring |
| Use | Indoor only |
| Installation | Wall socket |
| Package contents | LED night light, instruction manual |
| Safety instructions | Do not cover, use in dry rooms, disconnect before cleaning |
| Maintenance | Clean with a dry cloth, disconnect beforehand |
| Recycling | Complies with WEEE, eco-participation included |
| Certifications | WEEE Directive 2012/19/EU, registration DE:67896761 |
Frequently Asked Questions - 301487 Brandson
User questions about 301487 Brandson
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Night lamp in PDF format for free! Find your manual 301487 - Brandson and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 301487 by Brandson.
USER MANUAL 301487 Brandson
text_image
QR code image containing encoded data, no visible human-readable textENG: Current drivers, user manuals and other relevant documents for this product can be found on our homepage.
Important safety instructions for this device
- This device may only be used in accordance with its intended purpose and for private use.
- This device is only designed for indoor use. Keep it away from heat sources and direct sunlight.
- Do not tough the led nightlight with wet hands.
- Pull out the main plug from the socket when the machine is not in use or during cleaning.
- Only use the device according to the voltage which can be seen on the appliance labelling.
- Children must be under surveillance to ensure that they do not play with the product.
- Children may only use the product under supervision and guidance concerning the use and cleaning of the product.
- Do not connect after each other!
- To disconnect the voltage pull the plug.
- Use in dry rooms only!
- Do not cover when in use!
Thank you for having chosen this Brandon product and for placing your trust in our company. Please read this manual carefully before installation to ensure your long-term enjoyment of this product. For future reference, please keep this manual. Before using the delivered product, check that it is complete, faultless and undamaged.
1. Scope of delivery
- LED Nightlight
- User manual
2. Technical specifications
| Power supply 230V AC, 50 Hz | |
| Protection IP20 | |
| Max. output max. 3680 W | |
| Ambient temperature 0-40°C | |
| Features • Three colours | • Brightness sensor |
3. Function
The nightlight is equipped with a sensor with an automatic activation in the twilight. When it starts to get light, the sensor light automatically turns off. It is ideal for use as orientation light or alternatively usable as conventional socket.
4. Getting started
When the device is put into operation for the first time, check the intactness of the product or components and their function again. Remove the device from the packing. Plug the nightlight into a properly wired outlet.
- Choose between three different colors. The following applies:
- G Green
• B Blue - W White
- Finally, choose your desired color by turning the outer ring.
Note: With the position of the sensor, you can adjust the light sensitivity. If the sensor is pointed upwards, the sensitivity is higher. If the sensor is pointing downwards, there is a lower sensitivity.
5. Safety instructions and liability disclaimer
Never try to open the device to carry out repairs or conversions. Avoid contact with mains voltages. Do not short-circuit the product. The device is not certified for use in the open air; only use it in dry conditions. Protect it from high humidity, water and snow. Keep it away from high temperatures. Do not subject the device to sudden changes in temperature or heavy vibration as this might damage electronic components.
Examine the device for damage before using it. The unit should not be used if it has received an impact or has been damaged in any other way. Please observe national regulations and restrictions. Do not use the device for purposes other than those described in the instructions. This product is not a toy. Keep it out of the reach of children or mentally impaired persons. Any repair or alteration to the device not carried out by the original supplier, will invalidate the warranty or guarantee. The product may only be used by persons who have read and understood these instructions. The device specifications may change without any separate prior notice to this effect.
6. Disposal instructions
Electrical and electronic devices may only be disposed of in accordance with the European WEEE Directive and not with household rubbish. Components must be disposed of or recycled separately as dangerous, toxic elements can inflict sustained damage on the environment if they are disposed of incorrectly. As a consumer, you are bound by the Electrical and Electronic Devices Act (ElektroG) to return electrical and electronic goods free of charge at the end of their useful life to the manufacturer, the place of purchase or to specially set up, public collection points. The details in each case are governed by national law. The symbol on the product, the operating instructions and/or the packaging refers to these regulations. By separating materials in this way, recycling and disposing of old devices, you are making an important contribution towards protecting our environment. For information on authorised collection points in your area, please contact your local city or municipal administration.
WEEE guideline: 2012/19/EU WEEE register number: DE 67896761
WD Plus GmbH, herewith declares that this product 301487 conforms to the principle requirements and other relevant stipulations. The complete Declaration of Conformity can be obtained from: WD Plus GmbH, Wohlenbergstraße 16, 30179 Hanover
MO-FR 9:30am - 18pm CET
text_image
QR code image containing encoded data, no visible human-readable textbrandson-equipment.de
