Castel - Tent Sojag - Free user manual and instructions
Find the device manual for free Castel Sojag in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Garden tent (gazebo) |
| Brand | Sojag |
| Model | Castel |
| Category | Tent |
| Dimensions (L × l × H) | 410 × 345 × 296.3 cm |
| Floor area | Approximately 14.1 m² |
| Ceiling height | Approximately 296 cm |
| Main material | Steel and polyester |
| Approximate weight | 70 kg |
| Number of people for assembly | Minimum 2 people |
| Required tools | Hex keys included, Phillips screwdriver, drill (recommended) |
| Recommended use | Garden, terrace, patio |
| UV protection | Integrated anti-UV treatment |
| Wind resistance | Up to 50 km/h (anchoring required) |
| Maintenance | Clean with soapy water and rinse |
| Safety | Anchor securely to the ground; do not use in strong wind |
| Warranty | 2 years (parts and labor) |
| Spare parts | Available on request from the manufacturer |
| Repairability | Spare parts available, repair possible |
Frequently Asked Questions - Castel Sojag
What are the dimensions of the Sojag Castel tent?
The tent measures 410 cm in length, 345 cm in width and 296.3 cm in height at the highest point.
How many people are required for assembly?
It is highly recommended to have at least two people to assemble this tent. Some steps require holding parts in place.
What tools are needed for assembly?
Hex keys are included in the box. You will also need a Phillips screwdriver and possibly a drill for some steps.
Is the Sojag Castel tent UV resistant?
Yes, the tent is made with an anti-UV treatment to protect against the sun's rays.
Can the tent be left assembled in winter?
It is not recommended to leave the tent assembled in case of heavy snowfall or strong winds. It is better to disassemble or store it during winter.
How to clean the tent?
Clean the tent with mild soapy water and rinse thoroughly. Avoid abrasive products.
Is the tent supplied with mosquito nets?
According to the instructions, mosquito nets are not included. They are sold separately as an option.
Can the tent be installed on concrete?
Yes, but you will need to use anchor straps or weights to secure the structure, as it is not possible to drive stakes into concrete.
Is the tent waterproof?
The tent offers good water resistance for occasional use in the rain. In case of severe weather, it is recommended to cover it or disassemble it.
Where can I buy spare parts?
Spare parts are available on request from Sojag or through authorized dealers.
User questions about Castel Sojag
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tent in PDF format for free! Find your manual Castel - Sojag and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Castel by Sojag.
USER MANUAL Castel Sojag
natural_image
Simple line drawing of a rectangular object with a pointed tip, labeled 'A X4' in the top-left corner (no other text or symbols)
natural_image
Technical line drawing of a rectangular mechanical part (no text or symbols)
natural_image
Technical line drawing of a mechanical part (no text or symbols)
natural_image
Simple line drawing of a long rectangular object with a small protrusion at the end (no text or symbols)
natural_image
Technical line drawing of a rectangular mechanical part (no text or symbols)
natural_image
Pure mechanical rod diagram without any text, numbers, or symbols
natural_image
Technical line drawing of a mechanical part (no text or symbols)
natural_image
Simple line drawing of a horizontal rectangular shape with no text or symbols
natural_image
Simple line drawing of a horizontal bar with no text or symbols
natural_image
Simple line drawing of a rectangular beam with supports, no text or symbols present
natural_image
Simple line drawing of a rectangular metal beam with three supports (no text or symbols)
natural_image
Simple line drawing of a rectangular frame with four vertical supports, labeled 'K X2' in the top-left corner (no other text or symbols)
natural_image
Simple line drawing of a rectangular metal plate with three notches, labeled 'L X2' in the top-left corner (no other text or symbols)
natural_image
Technical line drawing of a mechanical part with flanges and a central body (no text or symbols)
natural_image
Line drawing of a 3D geometric prism with no text or symbols
natural_image
Simple 3D rectangular prism illustration with no text or symbolsA×4
Q1x4
A2×8
2/27
natural_image
Two mechanical shaft components labeled B x2 and C x2, shown side by side (no additional text or symbols)
R1x4
S1x4
F2×24
6/27
natural_image
Simple line drawing of a symmetrical object inside a circle (no text or symbols)
9/27
Ix2Jx2
[Non-Text]
A2x8
natural_image
Simple line drawing of a stylized object inside a circle (no text or symbols)
Z1x12
A2×12
natural_image
Pure mechanical component diagram without any text, numbers, or symbols
natural_image
Pure mechanical part diagram with no text, numbers, or symbols
natural_image
Two circular diagrams showing a drill and a tool, no text or symbols present.
A2x24
21A/27
natural_image
Two circular diagrams showing a drill and a tip, no text or symbols present.
natural_image
Symbolic illustration of two hands inside a circle (no text or symbols)
F1x4
J1x2
E1x4
H1x4
11x2
G1x4
natural_image
Simple line drawing of a tool or component inside a circle (no text or symbols)
A2×20
