SHE20AC2001F - Air Conditioning SHE - Free user manual and instructions

USER MANUAL SHE20AC2001F SHE

White industrial air conditioner unit with ventilation slots and wheels (no visible text or symbols)

SHE20AC2001F

HERZLICHEN GLÜCKWUNSCH!

VIELEN DANK, DASS SIE SICH FÜR EIN PRODUKT VON SHE ENTSCHIEDEN

HABEN.

Diagram of a portable air conditioner unit with numbered parts labeled 1 to 5

RÜCKSEITE:

Technical diagram of a device with numbered components, likely an air conditioning or cooling unit.

INBETRIEBNAHME

graph LR
    A["Top Left Panel"] --> B["Side Panel"]
    B --> C["Side Panel with Cover"]
    C --> D["Bottom Right Panel"]
    D --> E["Bottom Left Panel with Cover and Top Right"]

Diagram showing seven circular icons with symbols and a SHE logo, likely representing a vehicle or industrial control panel.

Diagram showing a device with labeled parts 1 and 2, indicating directional flow or process steps.

HINWEIS

Simple line drawing of a washing machine with a cylindrical component inserted into the air gap (no text or symbols)

REINIGEN DES GEHÄUSES

Important Information about Safety, Site Location and Electrical Connections	15 – 17
Recycling, Waste Management, Declaration of Conformity 17
Scope of Supply 17
Description of Appliance 18
Commissioning 19
Remote control 20 – 21
Setting the functions 21 –	22
Tips for correct application 23
Maintenance and cleaning 23 – 24
Activities at the beginning/end of the season 24
Tracking and fixing problems 25
Technical informations 25
Warranty 26

PLEASE READ THE OPERATING MANUAL CAREFULLY BEFORE BEGINNING INSTALLATION, MONITORING, OPERATING, OR MAINTENANCE. PROTECT YOURSELF AND OTHERS BY FOLLOWING THE SAFETY INSTRUCTIONS. FAILURE TO COMPLY WITH INSTRUCTIONS MAY RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE AND/OR LOSS OF WARRANTY CLAIMS!

IMPORTANT INFORMATION ABOUT SAFETY, SITE LOCATION AND ELECTRICAL CONNECTIONS.

Use this appliance exclusively under the guidelines of this operating manual. Any other use not recommended by the manufacturer may cause fire, electrical shock, or personal injury.

1. This appliance is intended exclusively for the cooling of living spaces in households and may not be used for any other purpose.
2. The appliance is not suitable for continuous and precision operation and should not be used for cooling electrical systems (e.g. in server rooms).
3. Remove the packing and make sure that the appliance is not damaged. In case of doubt, do not use the appliance, and contact the service centre or your dealer.

4. If the appliance has a defect, also contact either your dealer or the service centre.

5. If the power supply cable is damaged, it must be replaced by the manufacturer or an authorised service centre to avoid all possible risks.

6. For any repairs, always contact the customer service offices authorised by the manufacturer. You can access the customer service centres online at www.she.at.

7. Before connecting it to the mains power supply, check that the mains voltage and the type of electrical current matches the information provided on the type plate on the appliance.

8. The electrical outlet that the appliance must be connected to, must not be defective or loose and must be suitable for the current load required, and, above all, must be reliably earthed. In case of doubt, have your electrical installation checked by a qualified electrician.
9. Avoid using an extension cable, because this could overheat and cause a fire.
10. It is forbidden to adapt or modify the characteristics of this appliance in any way. Use only replacement parts and accessories recommended by the manufacturer (failure to comply will result in the loss of the guarantee and warranty).
11. Children must not be allowed to play with the appliance.
12. Do not let small children play with the packaging – THERE IS A DANGER OF SUFFOCATION ON SMALL PARTS!
13. Children under 8 years of age and persons with limited physical, psychological, sensory or mental abilities, as well as a lack of experience and knowledge, may only use this appliance under appropriate supervision and if this appliance is used for detailed instructions on both using this appliance in a safe manner and describing any existing hazards.
14. Do not operate the appliance unattended. Should you leave the room, always switch off the appliance.
15. Do not twist, buckle or snap off the power supply cable.
16. Do not use the appliance with wet hands.
17. Do not use the appliance outdoors.
18. Never cover the appliance.
19. Do not operate the appliance in rooms where gas, oil or sulphur are present.
20. Do not use the appliance near water or high humidity, e.g. in damp cellars, or next to swimming pools, bathtubs or showers. Make sure that water does not get into the appliance.
21. Do not place the appliance near heat sources (e.g. next to heating systems) and avoid direct sunlight.
22. Keep a minimum distance of at least 50 cm from combustible substances (e.g. alcohol) or pressurised vessels (e.g. spray containers).
23. Do not place any heavy or hot objects on top of the appliance.
24. Place the appliance on a solid and even support surface.
25. Never insert fingers, pins or other objects into the appliance and make sure that the air entry and outlet are never blocked.
26. Change the water regularly.
27. Always fill the water tank above the minimum level, but never above the maximum level.
28. If you want to move the appliance, always make sure that the locking brakes are loosened.
29. If there is water in the water tank, do not move the appliance quickly to avoid any leakage(s) or splashing any water.
30. To avoid high humidity, do not use the appliance in "COOL" mode for long periods of time in a closed area without ventilation.
31. The cool packs are not a toy – keep children and animals away from them.
32. Never attempt to open the cool packs for any reason. The liquid contained in it can be harmful to health.
33. Always switch the appliance off, before unplugging it.
34. Do not pull the mains cable to disconnect the appliance from the mains supply. Always pull the plug to pull out the mains cable.
35. To avoid electric shocks, do not handle the plug with wet or damp hands.

36. Remove the plug and empty the water tank, when the appliance is not in use.

37. When not in use, keep the appliance vertical in a safe, dry place that is inaccessible for children, and do not cover the appliance with plastic packaging.

38. Maintain the appliance in good condition by maintaining and cleaning it. If you have any questions about maintenance, contact the customer hotline/service centre authorised by the manufacturer.

RECYCLING

The packaging materials can be recycled. Therefore, it is recommended to dispose of them in sorted waste.

DISPOSAL

The pictogram with the crossed out dustbin points to the requirement for separate disposal of electrical and electronic appliances (WEEE). Electrical and electronic appliances can contain hazardous and environmentally hazardous materials. Therefore, do not dispose of these in the unsorted residual waste, but at a registered collection centre for waste electrical and electronic equipment. By doing so, you will help to conserve resources and protect the environment.

For further details, please consult your dealer or your local authorities.

DECLARATION OF CONFORMITY

We hereby confirm that this article complies with the essential requirements, regulations and guidelines of the EU.

The detailed declaration of conformity can be viewed at any time via following link: she.at/downloads/doc/she20ac2001F.pdf

Specifications are subject to change without prior notice.

SCOPE OF DELIVERY

The SHE cooler comes with:

• Air cooler
• 4x transport wheels
• 2x cool packs
• 1x operating manual

DESCRIPTION OF THE APPLIANCE

FRONT SIDE:

1. Control Panel + Display
2. Handle
3. Air outlet
4. Water level indicator
5. Transport wheels

Diagram of a portable air purifier with numbered parts labeled 1 to 5

BACK:

1. Cover plate of the radiator cover grid
2. Radiator cover grid + dust filter
3. Water re-fill flap
4. Water outlet

⑥ ⑦ ⑧ ⑨

COMMISSIONING

BEFORE USING THE APPLIANCE FOR THE FIRST TIME

Unpacking the Appliance

1. Open the carton and take out the appliance.
2. Remove all packaging from the appliance.
3. Unwind the mains cable completely and make sure not to damage it.

Transport wheels

For easier transport, the appliance is equipped with transport wheels.

In addition, two rollers are equipped with a locking brake to guarantee that they remain firmly in position.

1. After the appliance has been carefully unpacked, insert the transport rollers into the designated notches on the bottom of the appliance.
2. To adjust the locking brakes, press the levers as follows:

PRESS DOWNWARDS → to fix the brake

PUSH UPWARDS→ to release the brake

INSTALLATION

Please note the following points for installation.

1. Place the appliance on a level and solid surface and adjust the locking brakes so that the appliance stands firmly in position.
2. There must be at least a 50 cm gap to walls or other objects.
3. Before using the appliance, make sure that both the air inlet and the air outlet are free of obstacles and are not blocked.
4. Connect the appliance to an earthed outlet.

FILLING THE WATER TANK

Furthermore, please note the following:

1. Open the water refill flap on the side of the appliance.
2. Fill the air cooler with clean water, paying attention to the fill level on the front:
3. MIN mark → The water tank must be filled to above the MIN mark so that the pump can function properly.
4. MAX mark → Avoid filling the water tank over the MAX mark, otherwise water could enter the inside of the appliance and thus damage electronic parts.
5. Then close the flap again.

COOL PACKS

You will receive two cool packs that can be put into the water tank for a further cooling effect.

When using the cool packs, please note the following:

• Before use, place the cool packs in a freezer for at least 3-4 hours.
• When inserting the cool packs into the tank, make sure that the MAX mark is not exceeded.

NOTE

Ice cubes can also be filled into the water tank.

When doing so, please make sure that the MAX mark is not exceeded.

ATTENTION

Never attempt to open the cool packs for any reason. The liquid contained in it can be harmful to health.

REMOTE CONTROL

PREPARING REMOTE CONTROL – INSERTING OR REPLACING BATTERIES

Please follow the steps below to make it operate correctly:

1. To operate the remote control, please insert the button cell provided.

2. To do so, pull out the battery holder on the back of the remote control and insert the battery:

3. Please always pay attention to the polarity markings (+/-) on the battery and the battery holder:

graph LR
    A["Front Panel"] --> B["Arrow"]
    B --> C["Arrow"]
    C --> D["Circled Component"]
    D --> E["Arrow"]
    E --> F["Final Output"]

1. Then insert the battery holder back into the remote control.

NOTE

The buttons of the remote control are labelled as shown in the illustration below. All functions of the remote control work identically with the manual operation on the appliance.

HOW TO CORRECTLY USE THE REMOTE CONTROL

Point the remote directly at the front of the appliance and make sure there are no obstacles between the remote control and the appliance.

NOTE

Please handle the remote control carefully.

Do not expose the remote control to direct sunlight and keep it away from heat sources.

DESCRIPTION OF REMOTE CONTROL

ON/OFF

SETTING THE

SPEED

OSCILLATION

TIMER

MODES

COOL

Diagram showing eight circular icons with symbols and a SHE logo, likely representing a vehicle or appliance control panel.

SETTING THE FUNCTIONS

The control panel of the appliance has the same buttons as on the remote control, so all functions can be set directly on the appliance as well as by using the remote control.

SWITCHING ON THE APPLIANCE

- Press the ON/OFF button to switch the appliance on.

NOTE

As soon as the appliance is switched on, it runs at "Medium Speed", and after 3 seconds, switches to low speed.

SETTING THE SPEED

• Use the SPEED button to set and adjust the speed of the blower.
• The respective display lights up on the control panel:

Press:

1 x press → Low speed

2 x press → Medium speed

3 x press → High speed

OSCILLATION

• Use the SWING button to activate the oscillation of the appliance. The display lights up on the control panel.
  • To deactivate the function, press the SWING button again.

NOTE

This function allows the blown-out air to be distributed to the left and right. This enables horizontal air distribution in the room.

TIMER

• Use the TIMER button to switch off the appliance in a time-controlled way.
• With each press on the timer button, the operating time is gradually extended by half an hour each time, from 30 minutes to 8 hours.
• Pay attention to the four indicators on the appliance:

○ 1x press → 30 minutes → 0.5H lights up
○ 2x press → 1 hour → 1H lights up
○ 3x press → 1.5 hours → 0.5H + 1H lights up
○ Etc.

MODES

• Use the MODE button to select between the following modes:
• The respective display lights up on the control panel.

→ Normal Mode

→ The fan is running in normal operation.

→ Nature Mode

→ Simulates a breeze to create pleasant, natural airflow.

→ Sleep Mode

→ Simulates a gentle breeze to generate an airflow adapted to sleep requirements.

COOL AIR

• Use the COOL button to start the function.
• Make sure that the water level indicator is above the MIN level.
• As soon as the button is pressed, the appliance starts moistening the water filter to create cold and moist air, that is then blown out of the appliance.

TIPS FOR CORRECT APPLICATION

Below are some tips to get the very best out of the air cooler:

Protect the room from direct sunlight with curtains, blinds or shutters. This saves you energy.
Do not place any objects on to the appliance, and do not obscure the air outlet.
Keep the grilles clear.
Make sure that no heat sources are operating in the room.
Never use the appliance in very humid rooms (e.g. laundry rooms).
Do not use the appliance outdoors.
Make sure that the appliance is on level flooring and that the locking brakes are applied.

MAINTENANCE AND CLEANING

CLEANING DUST FILTERS

To ensure that the air cooler operates efficiently, you should clean the dust filter after each week of operation. Please follow these steps:

1. Before cleaning the appliance, switch it off, then wait a few minutes, and then unplug it to disconnect the appliance from the mains power supply.
2. Remove the cover grille on the back of the appliance ① and then remove the underlying dust filter ② from the appliance.
3. Use a vacuum cleaner to remove the dust accumulated in the filter.
4. If the filter is very dirty, immerse it in warm water and rinse it several times – but the water temperature must not exceed 40 °C .
5. Before putting the dust filter back into the cover grille, allow it to dry out well after washing.
6. Reattach the cover grille

Diagram showing a device with labeled parts, including numbered annotations 1 and 2 indicating components or functions.

NOTE

Never use the appliance without a filter.

EMPTYING THE WATER TANK

It is recommended to empty the water tank every 2-3 weeks during use. Please follow these steps:

1. Pull the mains plug from the socket. Place a collecting vessel under the water outlet on the back of the appliance.
2. Remove the cover and then drain the water into the collecting vessel. In the end, you the air cooler can be tilted slightly – but not by more than 30^ .
3. Once the tank has been completely emptied, reattach the cover and make sure it sits firmly.
4. Put the mains plug back in and restart the appliance

Simple line drawing of a washing machine with a cylindrical component inserted, no text or symbols present.

CLEANING THE HOUSING

Before cleaning the appliance, switch it off, then wait a few minutes, and then unplug it to disconnect the appliance from the mains power supply.

Clean the appliance with a moderately damp cloth, then wipe it with a dry cloth.

• Never use benzene, alcohol or solvents to clean the appliance – this could be dangerous.
• Do not spray insecticides or similar agents on to the air cooler.

ACTIVITIES AT THE BEGINNING/END OF THE SEASON

ACTIVITIES AT THE END OF THE SEASON

• Switch off the appliance and disconnect the mains plug.
• Carefully empty the water tank.
• Clean the filter and reinsert it (see section "Cleaning Dust Filters").
• Pack away the appliance and store it in a cool, dry place.

INSPECTIONS AT THE BEGINNING OF THE SEASON

• Verify that the power supply cable is in order and that the earthing is functioning.
• Follow the installation and safety instructions carefully.

TRACKING AND FIXING PROBLEMS

Before contacting our customer hotline/service centre, please check whether the error can be rectified using the instructions below.

PROBLEM	POSSIBLE CAUSE	SOLUTION
The air cooler does not switch on.	You are using the wrong button.	You can switch on the appliance with the button either on the remote control or directly on the appliance.
	Power failure	Wait for the power supply to be restored.
	The appliance is not connected to the power supply.	Connect/plug the appliance to the power supply and wait for a minimum of 30 mins!
	The remote control battery is flat. Please replace the battery.
The air cooler works only for a short amount of time.	The water tank is empty. Fill the water tank.
	Something is blocking the air outlet.	Check and remove all obstacles that are blocking the air supply.
During operation, an unpleasant odour is emerging from the room.	The air filter or water tank is dirty.	Clean the air filter(s) and/or water tank in accordance with the description.
The appliance is very loud.	The floor that the air cooler is located on is not level.	Place the air cooler in a different location.

Technical information
Nominal voltage	220 V ~ 240 V
Frequency	50 Hz
Rated power input	65 W
Water tank capacity	20 L
Description	Symbol	Value	Unit
Maximum air velocity	V	9.5	m/s
Air circulation	SV	580	(m3/h) W
Fan sound power level	LWA	61	dB(A)
Max. evaporative capacity	AL	400	ml/h
Consumption in standby mode	PSB	0.4	W
Dimensions
Product dimensions:	370 x 320 x 740 mm
Weight:	7.1 kg
Contact addresses for more information and Serviceline:	Schuss Home Electronic GmbHScheringgasse 3, A-1140 Vienna, AustriaTel: [phone] – 0Serviceline: [phone] – 502www.she.atFB no.: 236974 t / FB court: Vienna

WARRANTY

By purchasing this SHE quality product means that you have decided to place trust in durability, reliability and innovation.

For this SHE appliance, we grant a warranty period of 2 years from the date of purchase valid in Austria! If, contrary to expectations, service work on your appliance is still necessary during this period, we hereby guarantee either free repairs (spare parts and working time) or (at the discretion of Schuss) that we will replace the product. If it is not possible to either repair or exchange the product for economic reasons, we reserve the right to create a time value credit.

For air conditioners, please contact the customer hotline as a first step (see the labels on the appliance or title page of the operating manual), for fans, contact your specialist dealer or directly contact us. We would like to point out that repair work that has not been performed by the authorised contract workshop in Austria will immediately terminate the validity of this warranty.

This warranty does not cover:

• In case of improper use, we do not assume any consequential damage
• Repair or replacement of parts due to normal wear and tear
- Damage resulting from failure to follow the operating manual
- Appliances that are used commercially, even in part
- Appliances mechanically damaged due to external influence (any fall(s), impact(s), breakage(s), improper use, etc.) as well as signs of wear and tear of an aesthetic nature
- Appliances that have been improperly treated
- Appliances that have not been opened by our authorised service workshop
- Damage caused by improperly closed condensate drain valves of air conditioners or an incorrectly inserted water tank
• Unfulfilled consumer expectations
- Damage caused by force majeure, water, lightning and overvoltage
- Appliances that have had their type designation and/or serial number on the appliance changed, deleted, made illegible or removed.
- Services outside our contract workshops, the transport costs to either an authorised workshop or to us and back, and the associated risks

We would like to expressly point out that a fixed amount of € 60 (indexed basis CPI 2010, June 2015) will be charged within the warranty period in the event of operating errors or if no error has been detected.

The provision of a warranty service (repairs or replacement of the appliance) does not extend the absolute warranty period of 2 years from the date of purchase.

The 2-year warranty is only valid upon presentation of the proof of purchase (must include the name and address of the dealer as well as the complete appliance designation) and the corresponding warranty certificate, on which the appliance type and the serial number (on the box and on both the back and underside of the appliance) are to be noted! Without presenting the warranty certificate, only the legal warranty applies!

We would like to expressly point out that the statutory warranty rights are unaffected by this warranty and continue unabated.

A liability for damage on the part of Schuss Home Electronic GmbH and its vicarious agents only exists in the event of gross negligence or intent. In any event, liability for lost profits, expected but not occurred savings, consequential damage and damage arising from claims of third parties is excluded. Damage to or for recorded data are always excluded from the liability for damage.

Congratulations on making your choice. We wish you a lot of pleasure with the SHE appliance!

ADDRESS

SHE Vertrieb

Schuss Home Electronic GmbH

A-1140 Vienna (Austria),

Tel.: [phone]

Type designation:

Serial number:

In the event of a warranty claim, this warranty certificate must be handed over with the appliance to the authorised service workshop or the dealer which you purchased the appliance from!

SOMMAIRE

DÉCLARATION DE CONFORMITÉ

Diagram of a portable air purifier with numbered parts labeled 1 to 5

FACE ARRIÈRE :

Pure electrical panel icons without any text or symbols

Diagram of a solar panel installation with labeled components 1 and 2, showing directional arrows indicating movement.

AVIS

Simple line drawing of a refrigerator with a cylindrical base and hanging door (no text or symbols)

NETTOYER LE BOÎTIER

Diagram of a portable air purifier with numbered parts labeled 1 to 5

PARTE POSTERIOR:

Technical diagram of a portable air purifier with numbered components and internal grid structure

PUESTA EN MARCHA

Image showing seven circular icons with various symbols and a SHE logo, likely representing a weather or climate control system.

AJUSTAR FUNCIONES

Diagram of a solar panel installation with labeled components 1 and 2, showing directional arrows indicating movement.

NOTA

Simple line drawing of a refrigerator with a hanging cylindrical object underneath (no text or symbols)

LIMPIAR CARCASA

Diagram of a portable air conditioner unit with numbered parts labeled 1 to 5

RETRO:

Technical diagram of a device with numbered components, likely an air conditioning or cooling unit.

MESSA IN FUNZIONE

graph LR
    A["Top-Left Device"] --> B["Arrow to Top-Right Device"]
    B --> C["Arrow to Bottom-Left Device"]
    C --> D["Bottom-Right Device"]
    D --> E["Arrow to Bottom-Right Device"]

Pure electrical circuit lines without any symbols

ACCENSIONE DEL DISPOSITIVO

Diagram of a solar panel installation with labeled components 1 and 2, showing directional arrows indicating flow or movement.

AVVISO

Simple line drawing of a washing machine with a cylindrical component underneath (no text or symbols)

PULIZIA DEL CORPO DEL DISPOSITIVO

Diagram of a portable air conditioner unit with numbered parts labeled 1 to 5

ZADNÍ STRANA:

Technical diagram of a device with numbered components, likely an air purifier or rack unit.

UVEDENÍ DO PROVOZU

PŘED PRVNÍM UVEDENÍM DO PROVOZU

Vybalení přístroje

Diagram showing seven circular icons with symbols and a SHE logo, likely representing a vehicle or appliance control panel.

NASTAVENÍ FUNKCÍ

Diagram of a solar panel installation with labeled components 1 and 2, showing structural layers and airflow direction.

UPOZORNĚNÍ

Simple line drawing of a washing machine with a cylindrical component at the bottom (no text or symbols)

ČIŠTĚNÍ KRYTU

Diagram of a portable air purifier with numbered parts labeled 1 to 4

HÁTOLDAL:

Technical diagram of a portable air purifier with numbered components and internal mesh structure

ÜZEMBE HELYEZÉS

graph LR
    A["Top Left Panel"] --> B["Side Panel"]
    B --> C["Side Panel with Cover"]
    C --> D["Bottom Right Panel"]
    D --> E["Bottom Left Panel with Cover"]

Diagram showing a device with labeled parts 1 and 2, indicating directional movement or assembly.

MEGJEGYZÉS

Simple line drawing of a refrigerator with a hanging cylindrical object underneath (no text or symbols)

Diagram of a portable air purifier with numbered parts labeled 1 to 5

TYLNA STRONA:

Image showing seven circular icons with symbols and a 'SHE' logo, likely representing a smart home control or indicator.

USTAWIENIE FUNKCJI

Simple line drawing of a washing machine with a cylindrical component inserted into the air gap (no text or symbols)

CZYSZCZENIE OBUDOWY

Diagram of a portable air purifier with numbered parts labeled 1 to 5

POLEDINA:

1. Omča pokrivne rešetke
2. Pokrivna rešetka + filtar za prašinu
3. Poklopac za dolijevanje vode
4. Otvor za ispuštanje vode

Technical diagram of a device with numbered components, likely an air conditioning or cooling unit.

PUŠTANJE U POGON

PRIJE PRVOG PUŠTANJA U POGON

Raspakiranje uređaja

Image showing eight circular icons with symbols and a SHE logo, likely representing a weather or industrial control system.

NAMJEŠTANJE FUNKCIJA

Diagram showing a device with labeled parts 1 and 2, indicating directional movement or assembly steps.

NAPOMENA

Simple line drawing of a washing machine with a cylindrical component underneath (no text or symbols)

ČIŠĆENJE KUĆIŠTA

Diagram of a portable air conditioner unit with numbered parts labeled 1 to 5

ZADNJA STRANA:

1. Jezičak zaštitne rešetke
2. Zaštitna rešetka + filter prašine
3. Poklopac za dopunjavanje vode
4. Ispuštanje vode

Technical diagram of a device with numbered components, likely an air conditioning or cooling unit.

PUŠTANJE U RAD

PRE PRVOG PUŠTANJA U RAD

Raspakujte uređaj

Diagram showing a device with labeled parts 1 and 2, indicating directional movement or assembly.

NAPOMENA

Ne koristite nikada uređaj bez filtera..

PRAŽNJENJE REZERVOARA ZA VODU

Diagram of a washing machine with a cylindrical component and labeled parts, showing front view and side view.

ČIŠĆENJE KUĆIŠTA

Pre čišćenja isključite uređaj, zatim pričekajte nekoliko minuta, a onda izvucite utikač, da biste isključili uređaj iz mreže.

Diagram of a portable air purifier with numbered parts labeled 1 to 5

ARKA TARAF:

Diagram showing seven circular icons with symbols and a SHE logo, likely representing a vehicle or appliance control panel.

İŞLEVLERİ AYARLAMA

Diagram showing a device with labeled parts 1 and 2, indicating directional movement or assembly.

NOT

Simple line drawing of a refrigerator with a cylindrical base and door, no text or symbols present

GÖVDEYİ TEMİZLEME