HLG 1500-2 - Heat gun Alpha Tools - Free user manual and instructions

USER MANUAL HLG 1500-2 Alpha Tools

Before starting operation, be sure to read the operating and safety instructions!

Proper use

The hot air gun is designed for heating shrink-down plastic tubing, for stripping paints and for welding and shaping plastics.

Attention:

Fire hazard during use! Diagram of the hot air pistol :

1 nozzle
2 2 level ON/OFF switch level 1: 375°C / 400 l/min level 2: 500°C / 550 l/min
3 suspension shackle
4 power cable
5 Deflector nozzle
6 Fishtail nozzle
7 Cone nozzle 20 mm
8 Reflector nozzle

Technical data:

Nominal voltage: 230 V ~ 50 Hz

Power rating: 1500 watt

Temperature: 375°C / level 1

500°C / level 2

Air rate: 400 l / level 1

550 l / level 2

Sound pressure level LPA : 72 dB(A) Sound power level LWA : 82 dB(A)

Vibration a_w <2,5 m/s ^2 Weigth 0,7 kg

Safety Instructions:

● Before plugging in the power supply cord, be sure that the ON/OFF switch is in the central position.
- The nozzle reaches temperatures of up to 600°C. Fire hazard! Wear protective gloves and eye wear. The nozzle should not be touched during operation.
- Allow the hot air pistol to completely cool before putting away.
● Never expose the unit to rain or moisture. Store the unit in a dry place.
- Do not leave the unit unattended. Keep out of reach of children.
● Never direct the air flow at people or animals. Do not use the unit to dry clothing or hair. Do not use the hot air blower as a hair dryer.
- Do not use the unit near easily flammable or explosive substances or gasses.
● Never block the hot air flow by plugging or covering the air flow exit.
- Use only original accessory and replacement parts from the manufacturer.
- Do not wear loose clothing or jewelry. Wear slip-resistant shoes and wear a hair net for long hair. During operation maintain a secure footing.
● Never use the unit in wet surroundings or in areas with high humidity (bathroom, sauna, etc.).
- Check your work area for easily flammable substances and materials before using the hot air pistol.
● Never carry the hot air pistol by the power supply cord.

GB

• Only use extension cords with a minimum cross-section area of 1,5 mm ^2 .
  ● Repairs (for example power supply cord replacement) should be performed only by a qualified electrician.
• Do not use chemical paint removers or solvents at the same time as the hot air pistol.
  ● Clean the nozzle when soiled.
• Be sure that the openings for air entry and exit are always clean and free of dirt.
  ● Hazardous or poisonous gasses can be freed when removing paint. Be sure to provide adequate ventilation while working indoors.
  ● Never point the hot air directly at windows or other glass surfaces.

Start of operation:

Be sure that the power supply voltage matches that printed on the model name-plate.

Choose the desired temperature and air quantity with the ON/OFF switch (2). The hot air pistol reaches the working temperature within one minute.

Switch position 1:

1st level - 375 °C / 400 l liters per minute.

Center position:

The tool is switched off.

Switch position 2:

2nd level - 500 °C / 550 l liters per minute

Possible uses for the hot air pistol:

1. Removal of paint and lacquer. Attention! Hazardous or poisonous gasses may be produced while removing paint or lacquer. Be sure to provide adequate ventilation.
2. Removal of stickers and decorations.
3. Loosening of rusted or tightly fastened nuts and metal screws.
4. Thawing of frozen pipes, door locks, etc. Attention: no not attempt to thaw plastic or synthetic pipes.
5. Accentuation of natural wood grains before staining or lacque-ing.
6. Shrinkage of PVC packaging foils and insulation tubes.
7. Waxing and de-waxing of skis.

Caution: Intensive heating means a higher risk of fire and explosion! Ensure good ventilation. Harmful and/or toxic gases and vapors may be emitted.

Choosing the right nozzle:

● The deflector nozzle (5) diverts the hot air to protect glass etc. from overheating. Use it to strip paints.
- Use the fishtail nozzle (6) to distribute the air uniformly over small areas.
- Use the cone nozzle (7) to confine the heat to corners and small areas.
- Use the reflector nozzle (8) to solder and shape pipes, to thaw frozen water pipes and to heat shrink-down insulation tubing.

GB

Maintenance:

Always keep the openings for air entry and exit clean and free of dirt.

Clean the hot air pistol with a damp cloth and a household cleaner. Do not clean with solvents.

F

The undersigned declares in the name of the company that the product is in compliance with the following guidelines and standards.

The product described in these instructions cannot with a 5-year warranty covering defects. This 5-year warranty period begins with the passing of risk or when the customer receives the product.

For warranty claims to be accepted, the product has to receive the current maintenance and be put to the proper use as described in the opening instructions.

Your statutory rights of warranty are naturally unaffected during these 5 years.

This warranty applies in Germany, or in the respective country of the manufacturer's main regional service partner, as a supplement for local regulations. Please note the details for contacting the customer service carrier responsible for your region or the service address listed below.

© CERTIFICADO DE GARANTIA

Eschenstraße 6 · D-94405 Landau/Isar (Germany)

Info-Tel. [phone] • Telefax 0180-5 835 830

© Futaq International

H Einbell Hungary Ltd

Vajda Peter u. 12

H.1089 Budapest

Tel. [phone], Fax [phone]

TR Semak

© Einhell Distribution SRL Romania

RO-Bucureati, Sector 5

Tel. [phone]. Fax [phone]

CZ Poker Plus S.R.C

Vypadova 1335

CZ-15300 Probe 5 - Radotin

Tel. + Fax [phone]

Technical & Commercial Company

1. Penastratou & Asklinjou Str

GR 18545 Piräue

Tel: [phone]

Barnas

Altutyevskove shosse, 2A

BUS 127273 Moscow

Tel. [phone] Fa

LT Direits

Metalo str. 23

LT2038 Vilnius

Tel [phone], Fax [phone]

⑤ AS Baltoil

Boju, Haaslava vald

55 62102 Tart

Tel [phone] Fax [phone]

(###) Halai Trading Co, LLC

POB 9282, Nakheel Rd. Deira, Shop No. 15

UAE Dubai

Tel./Fax [phone]

⑱ Alborz Abzar Co. Ltd.

No. 111, Bastan Passage Imam Khomeini Ave.

IR 11146 Teheran

Tel [phone], Fax [phone]

(K) I.B.O

Belinskij-str. 102

KZ 486008 Chimkent

Tel [phone], Fax [phone]

BH FIS d.o.o

Poslovni Centar 96

BIH 87000 Vitez

Tel [phone], Fax [phone]

CS MANIMEX 4.0.0

Uzicke republike 93

CS 31000 Uzice

Tel [phone], Fax [phone]

D

The reprinting or reproduction by any other means, in whole or in part, of documentation and papers accompanying products is permitted only with the express consent of ISC GmbH.

F