MowBest 805 - Robot mower Yard Force - Free user manual and instructions
Find the device manual for free MowBest 805 Yard Force in PDF.
User questions about MowBest 805 Yard Force
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Robot mower in PDF format for free! Find your manual MowBest 805 - Yard Force and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MowBest 805 by Yard Force.
USER MANUAL MowBest 805 Yard Force
natural_image
Line drawing of a Mitsubishi robotic car with visible gear and control panel (no text or symbols)MowBest 805
MowBest 3EC
ROBOTIC MOWER Safety Instruction
General safety warnings ....6
Product safety warnings ....11
CE declaration ....13
INTENDED USE
The Robotic Mower is exclusively designed for mowing lawns. It is only intended for private use and is not suitable for commercial use.
Any other use that is not specifically approved in these instructions can result in damage to the Robotic Mower and could be a serious danger to the user.
This appliance MUST NOT be used by children and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
The owner or operator is responsible for accidents or harm to others people and their property.
The manufacturer cannot be held liable for damage caused by other incorrect operation of the Robotic Mower or if it is not used in line with its intended purpose.
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention to any possible dangers. The safety symbols and their explanations deserve your careful attention and full understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no substitute for proper accident prevention measures.
WARNING!
Be sure to read and understand all safety instructions within this operator's manual, including all safety alert symbols such as "DANGER," "WARNING," and "CAUTION" before using this tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury.
SAFETY ALERT SYMBOLS: Indicate DANGER, WARNING, or CAUTION. May be used in conjunction with other symbols or pictographs.
SYMBOL MEANINGS
This page depicts and describes safety symbols that may appear on this product. Read, fully understand and follow all instructions on the machine before attempting to assemble and operate.
Caution!
These instructions must be read.
Danger of injury due to flung-out material! Keep bystanders well away from the machine.
WARNING - Do not ride on the machine.
CAUTION - Do not touch rotating blade.
WARNING – Remove the disabling device before working on or lifting the machine.
WARNING – Keep your hands and feet away from the rotating blades. Never place your hands or feet close to or under the body when Robotic Mower is in operation.
Return any discarded batteries to your local dealer, collector or recycle point. It is not permitted to dispose of this product as normal household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice.
Class III equipment
Warning Symbols on the switching power supply
Before use, refer to the corresponding paragraph in the manual.
Double insulation.
Pole orientation.
Waste electrical products should not be disposed of with household waste. Recycle where facilities exist. Check your local authority or retailer for recycling advice.
CE conformity mark
SMPS (Switch mode power supply unit) incorporating a short-circuit-proof safety isolating switching power supply.
SMPS(Switch mode power supply unit)
Ta:45 °C
Rated maximum ambient temperature 45 °C
Transfrom is for indoor use only.
Warning Symbols on battery pack
Batteries contain Li-Ion and should not be disposed with general household waste. Contact your local authority for disposal advice.
Li-Ion
Do not throw into water.
Do not throw on to fire.
Do not subject the battery to strong sunlight over long periods and do not leave it in high temperatures.(max. 45 °C).
Waste electrical products should not be disposed of with household waste. Recycle where facilities exist. Check your local authority or retailer for recycling advice.
GENERAL SAFETY WARNINGS
WARNING!
This machine can cause serious injuries. Follow instructions below to reduce risk of accident and injury.
IMPORTANT READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE
PREPARATION
- Read the instructions carefully and make sure you understand them fully. Be familiar with the controls and the proper use of the machine.
- Never allow children, persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge or people unfamiliar with these instructions use the machine.
- Local regulations may restrict the age of the operator. Children should be supervised to ensure that they do not play with the appliance.
- The operator or user is responsible for accidents or hazards occurring to other people or their property.
- Ensure the correct installation of the perimeter boundary system as instructed.
-
Periodically inspect the area where the machine is to be used and remove all stones, sticks, wires, and other debris which could cause damage to the machine or be unsafe.
-
Periodically visually inspect to see that the blades, blade bolts and cutter assembly are not worn or damaged. Replace worn or damaged blades and bolts in sets to preserve balance.
- On multi-spindle machines, take care as rotating one blade can cause other blades to rotate.
- Never leave the machine to operate unattended, especially while other people such as children and pets are in the area.
- Never use the machine to level out uneven patches.
- If the blades no longer cut correctly or if the motor is overloaded, check all the parts of your equipment and replace the worn parts. If a more extensive repair is required, contact the customer service centre.
USE
- Do not put hands or feet near or under rotating parts.
- Never pick up or carry the machine while the motor is running.
- Remove the plug from the mains or remove the disabling device:
– before clearing any blockages.
– before checking, cleaning or maintaining the machine.
– after striking a foreign object to inspect the machine for damage. - if the machine starts to vibrate abnormally, and to check for damage before restarting.
- Start Robotic Mower according to the instructions. When the main power switch is in the ON position, make sure you keep your hands and feet away from the rotating blades.
- Never lift the Robotic Mower or carry it around with the mains switch is in the ON position.
- Do not let persons use the mower who do not know how it works or behaves.
- Do not put anything on top of the Robotic Mower or its docking station.
- Do not use the Robotic Mower with defective blade discs, body, defective blades, screws, nuts etc.
- Avoid operating the machine in wet grass. Doing so can cause additional wear and tear, and will increase the amount of cleaning required.
WORK INTERRUPTIONS
- After the machine has been turned off, the cutting cylinder will continue to rotate for a few seconds. Keep hands and feet well away.
- Switch off the device. Only remove blockages when the machine is standing completely still.
- Switch off the power when the machine is transported, lifted or tilted.
- Never leave the machine unattended. Children should be supervised to ensure that they do not play with the appliance.
CAUTION!
The following below outlines measures to avoid damage and harm to both the Robotic Mower and people using it.
TAKING CARE OF YOUR MACHINE
- Switch off the power when the machine is to be carried across uneven surfaces, for example steps.
- Inspect the machine before each use. Never operate the machine if safety devices (e.g. impact protector, parts of the cutting facility or bolts) are missing, worn out or damaged. Check the power cable for damage. To avoid imbalance, all tools and bolts must be changed as complete sets.
- Only use spare parts and accessories that have been supplied or recommended by the manufacturer. The use of alien parts results in the immediate loss of all guarantee claims.
- Ensure that all nuts, bolts and screws are firmly tightened and that the machine is in a safe working condition.
- Never try to repair the machine yourself, unless you have been trained accordingly. All work that has not been listed in these instructions must only be carried out by authorised servicing agencies.
- Treat the machine with the greatest care. Always keep the tool clean. Follow the maintenance instructions.
- Never overload the machine. Always work within the specified capacity range. Do not use low-power machines for heavy-duty work. Do not operate the machine for purposes for which it is not intended.
ELECTRICAL SAFETY
CAUTION!
The following states how to avoid accidents and injuries due to electric shock:
- Before each use, carry out a visual inspection of the power and length and type of extension cords to be used (not lighter than required by Clause 25.7) for any signs of damage or ageing. Damaged mains power cables increase the risk of electric shock.
- Connect the machine to a power socket with a residual-current circuit breaker that has a rated current of no more than 30 mA.
- Always keep the extension cable well away from the cutting tools. Should the power cable become damaged during work, instantly disconnect the power cable from the mains. DO NOT TOUCH THE POWER CABLE BEFORE IT HAS BEEN DISCONNECTED FROM THE MAINS! Risk of electric shock.
- The supply cord cannot be replaced. If the cord is damaged the appliance should be scrapped.
- Keep extension cable away from blades and other moving parts. They may damage the cable and result in contact with live parts.
- Check that the mains voltage is the same as indicated on the rating plate.
MAINTENANCE AND STORAGE
- Keep all nuts, bolts and screws tight to be sure the machine is in a safe working condition.
- Replace worn or damaged parts for safety.
- Ensure that only the recommended replacement cutting blades are fitted.
- Ensure that batteries are charged using the charger supplied or recommended by the manufacturer. Incorrect use may result in electric shock, overheating or leakage of corrosive liquid from the battery.
- Servicing of the machine should be carried out according to manufacturer's instructions.
-
In the event of leakage of electrolyte, flush with water/neutralising agent, seek medical help if it comes into contact with the eyes.
-
Store the appliance with battery pack fully charged at room temperature (around 20 °C).
- Every deep discharge cycle decreases the capacity of battery pack. To prolong battery life, it is recommended to charge the battery every 6 months over extended periods of time without use.
TRANSPORT
The original packaging should be used when transporting the Robotic Mower over long distances.
To safely move from or within the working areas:
- Press the STOP button to stop the mower.
- Move the main switch button to the OFF position if you intended to carry the mower.
- Carry the Robotic Mower using the handle below at the rear. Carry the mower with the blade disc away from the body.
PRODUCT SAFETY WARNINGS
Not to touch moving hazardous parts before these have come to a complete stop.
Do not store anything heavy on the top of the Robotic Mower or docking station both during storage or when in use.
Never use the device if the main power switch is damaged or does not work properly. Never modify the main power switch. Set the main power switch to OFF for storage or when the device is not in use. Use the original packaging when transporting the Robotic Mower, especially for long distances.
If you need to carry the Robotic Mower from or within the working area, first press the STOP button to stop the device.
Secondly, ensure that the main power switch is switched OFF before you lift up your Robotic Mower.
Thirdly, carry the Robotic Mower by the carrying handle at the rear under the mower, keeping the blade disc away from your body as shown.
flowchart
graph LR
A["STOP"] --> B["车辆检测"]
B --> C["行人使用锁锁"]
style A fill:#f9f,stroke:#333
style B fill:#ccf,stroke:#333
style C fill:#cfc,stroke:#333
LIGHTNING PROTECTION
In order to prevent lightning damage to the machine, do not place the docking station under tall trees.
natural_image
Illustration of a person standing on a fence with a lightning bolt striking the edge, no text or symbols present.CE DECLARATION
Declaration of Conformity
We
SUMEC UK
Unit A&B Escrick Business Park
Escrick, York YO19 6FD
Declare that the product:
Description: 20V Robotic Mower
Model No. MowBest 805 & MowBest 3EC
Function: Cutting grass
Conforms to the following directives and standards
Machinery Directive 2006/42/EC
EN 60335-1: 2012+A11+A13+A1+A14+A2
EN 50636-2-107:2015+A1+A2
EN 62233:2008
Radio Equipment Directive 2014/53/EU
NB0123, TUV SUD Product Service GmbH Ridlerstraße 65.80339 Munich. Germany
EU type examination certificate no.: TPS-RED 500307 i01
EN 55014-1:2017
EN 55014-2:2015
EN 301 489-1 V2.2.3
EN 301 489-3 V2.1.1
Draft EN 303 447 V1.2.0
EN 50665:2017
EN 61000-3-2:2014
EN IEC 61000-3-2:2019
EN 61000-3-3:2013
EN 61000-3-3:2013/A1
EN 50581:2012
RoHS Directive 2011/65/EU
Authorized Signatory
M. Hall
Signature:
Place: YORK
Name: Mariana Hall
General Manager
Date: 2020.10.23
SUMEC UK
Unit A&B Escrick Business Park
Escrick, York YO19 6FD
Declaration of Conformity
We
MEROTEC GmbH
47877 Willich / Germany
Declare that the product:
Description: 20V Robotic Mower
Model No.MowBest 805 & MowBest 3EC
Function: Cutting grass
Conforms to the following directives and standards
Machinery Directive 2006/42/EC
EN 60335-1: 2012+A11+A13+A1+A14+A2
EN 50636-2-107:2015+A1+A2
EN 62233:2008
Radio Equipment Directive 2014/53/EU
NB0123, TUV SUD Product Service GmbH Ridlerstraße 65.80339 Munich.Germany
EU type examination certificate no.: TPS-RED 500307 i01
EN 55014-1:2017
EN 55014-2:2015
EN 301 489-1 V2.2.3
EN 301 489-3 V2.1.1
Draft EN 303 447 V1.2.0
EN 50665:2017
EN 61000-3-2:2014
EN IEC 61000-3-2:2019
EN 61000-3-3:2013
EN 61000-3-3:2013/A1
EN 50581:2012
RoHS Directive 2011/65/EU
Authorized Signatory
Signature:
Place: Willich
Name: Roland Menken
General Manager
Date: 2020-10-23
MEROTEC GmbH
47877 Willich / Germany
Declaration of Conformity
We
SUMEC France Sarl
Declare that the product:
Description: 20V Robotic Mower
Model No. MowBest 805 & MowBest 3EC
Function: Cutting grass
Conforms to the following directives and standards
Machinery Directive 2006/42/EC
EN 60335-1: 2012+A11+A13+A1+A14+A2
EN 50636-2-107:2015+A1+A2
EN 62233:2008
Radio Equipment Directive 2014/53/EU
NB0123, TUV SUD Product Service GmbH Ridlerstraße 65.80339 Munich. Germany
EU type examination certificate no.: TPS-RED 500307 i01
EN 55014-1:2017
EN 55014-2:2015
EN 301 489-1 V2.2.3
EN 301 489-3 V2.1.1
Draft EN 303 447 V1.2.0
EN 50665:2017
EN 61000-3-2:2014
EN IEC 61000-3-2:2019
EN 61000-3-3:2013
EN 61000-3-3:2013/A1
EN 50581:2012
RoHS Directive 2011/65/EU
Authorized Signatory
Signature:
Place: Saint Cyr Sur Loire
Name: Rodolphe Dubois
General Manager
Date: 2020-10-23
SUMEC France Sarl
PFLEGEN SIE IHR WERKZEUG:
flowchart
graph LR
A["STOP"] --> B["Robot"]
B --> C["Person with alarm clock"]
natural_image
Illustration of a person standing on a fence with a lightning bolt striking the edge, no text or symbols present.Unit A&B Escrick Business Park
Escrick, York YO19 6FD
Machinery Directive 2006/42/EC
EN 60335-1:2012+A11+A13+A1+A14+A2
EN 50636-2-107:2015+A1+A2
EN 62233:2008
Radio Equipment Directive 2014/53/EU
NB0123, TUV SUD Product Service GmbH Ridlerstraße 65.80339 Munich.Germany
RoHS Directiv M. Hall
Unterschrift:
Ort: YORK
Name: Mariana Hall
Geschäftsführer
Datum: 2020. 10. 23
SUMEC UK
Unit A&B Escrick Business Park
Escrick, York YO19 6FD
Wir
MEROTEC GmbH
Machinery Directive 2006/42/EC
EN 60335-1:2012+A11+A13+A1+A14+A2
EN 50636-2-107:2015+A1+A2
EN 62233:2008
Radio Equipment Directive 2014/53/EU
NB0123, TUV SUD Product Service GmbH Ridlerstraße 65.80339 Munich.Germany
RoHS Directive 2011/65/EU
Poland, Houston
Unterschrift:
Ort: Willicl
Name: Roland Menken
General Manager
Datum: 2020-10-23
MEROTEC GmbH
Machinery Directive 2006/42/EC
EN 60335-1: 2012+A11+A13+A1+A14+A2
EN 50636-2-107:2015+A1+A2
EN 62233:2008
Radio Equipment Directive 2014/53/EU
NB0123, TUV SUD Product Service GmbH Ridlerstraße 65.80339 Munich.Germany
RoHS Directive 2011/65/EU
Unterschrift:
Ort: Saint Cyr Sur Loire
Name: Rodolphe Dubois
Geschäftsführer
Datum: 2020-10-23
SUMEC France Sarl
flowchart
graph LR
A["STOP"] --> B["Robot"]
B --> C["Person with device"]
ZAŠČITA PRED STRELO
Da preprečite poškodbo stroja zaradi strele, ne postavite priklopne postaje pod visoka drevesa.
natural_image
Illustration of a person falling from a storm with a lightning bolt striking the ground, no text or symbols present.IZJAVA CE
Izjava o skladnosti
Mi
SUMEC UK
Unit A&B Escrick Business Park
Escrick, York YO19 6FD
Izjavljamo, da je izdelek:
Opis: 20 V robotska kosilnica
Unit A&B Escrick Business Park
Escrick, York YO19 6FD
Izjava o skladnosti
Mi
MEROTEC GmbH
natural_image
Illustration of a person standing on a fence with a lightning bolt striking the edge, no text or symbols present.CE NYILATKOZAT
Unit A&B Escrick Business Park
Escrick, York YO19 6FD
Machinery Directive 2006/42/EC
EN 60335-1: 2012+A11+A13+A1+A14+A2
EN 50636-2-107:2015+A1+A2
EN 62233:2008
Radio Equipment Directive 2014/53/EU
NB0123, TUV SUD Product Service GmbH Ridlerstraße 65.80339 Munich. Germany
RoHS Directive 2011/65/EU
M. Hall
Aláírás:
Hely: YORK
Név: Mariana Hall
Vezérigazgató
Dátum: 2020-10-23
SUMEC UK
Unit A&B Escrick Business Park
Escrick, York YO19 6FD
47877 Willich/Germany
Machinery Directive 2006/42/EC
EN 60335-1: 2012+A11+A13+A1+A14+A2
EN 50636-2-107:2015+A1+A2
EN 62233:2008
Radio Equipment Directive 2014/53/EU
NB0123, TUV SUD Product Service GmbH Ridlerstraße 65.80339 Munich.Germany
RoHS Directive 2011/65/EU
Poland Hou Lom
Aláírás:
Hely: Willich
Név: Roland Menken
Vezérigazgató
Dátum: 2020-10-23
MEROTEC GmbH
47877 Willich, Germany
Machinery Directive 2006/42/EC
EN 60335-1: 2012+A11+A13+A1+A14+A2
EN 50636-2-107:2015+A1+A2
EN 62233:2008
Radio Equipment Directive 2014/53/EU
NB0123, TUV SUD Product Service GmbH Ridlerstraße 65.80339 Munich. Germany
RoHS Directive 2011/65/EU
Aláírás:
Hely: Saint Cyr Sur Loire
flowchart
graph LR
A["STOP"] --> B["Robot"]
B --> C["Human Figure"]
OCHRANA PŘED BLESKEM
natural_image
Illustration of a person falling from a metal fence with a lightning bolt, no text or symbols presentPROHLÁŠENÍ O SHODĚ
My,
MEROTEC GmbH
Machinery Directive 2006/42/EC
EN 60335-1:2012+A11+A13+A1+A14+A2
EN 50636-2-107:2015+A1+A2
EN 62233:2008
Radio Equipment Directive 2014/53/EU
NB0123, TUV SUD Product Service GmbH Ridlerstraße 65.80339 Munich.Germany
RoHS Directive 2011/65/EU
Podpis:
Místo: Willich
Unit A&B Escrick Business Park
Escrick, York Y019 6FD
Machinery Directive 2006/42/EC
EN 60335-1: 2012+A11+A13+A1+A14+A2
EN 50636-2-107:2015+A1+A2
EN 62233:2008
Radio Equipment Directive 2014/53/EU
NB0123, TUV SUD Product Service GmbH Ridlerstraße 65.80339 Munich.Germany
RoHS Directive 2011/65/EU
M. Hall
Podpis:
Místo: YORK
Jméno: Mariana Hall
Generální ředitel
Datum: 2020-10-23
SUMEC UK
Unit A&B Escrick Business Park
Escrick, York YO19 6FD
My,
SUMEC France Sarl
Machinery Directive 2006/42/EC
EN 60335-1: 2012+A11+A13+A1+A14+A2
EN 50636-2-107:2015+A1+A2
EN 62233:2008
Radio Equipment Directive 2014/53/EU
NB0123, TUV SUD Product Service GmbH Ridlerstraße 65.80339 Munich.Germany
RoHS Directive 2011/65/EU
Podpis:
Místo: Saint Cyr Sur Loire
Jméno: Rodolphe Dubois
Generální ředitel
Datum: 2020-10-23
SUMEC France Sarl
flowchart
graph LR
A["STOP"] --> B["Device"]
B --> C["Person with alarm clock"]
OCHRANA PRED BLESKOM
Aby nedošlo k poškodeniu stroja bleskom, neumiestňujte nabijaciu stanicu pod vysoké stromy.
natural_image
Illustration of a person standing on a fence with a lightning bolt striking the ground, no text or symbols present.VYHLÁSENIE CE
Machinery Directive 2006/42/EC
EN 60335-1: 2012+A11+A13+A1+A14+A2
EN 50636-2-107:2015+A1+A2
EN 62233:2008
Radio Equipment Directive 2014/53/EU
NB0123, TUV SUD Product Service GmbH Ridlerstraße 65.80339 Munich.Germany
RoHS Directive 2011/65/EU
Podpis:
Miesto: Willich
Meno: Roland Menken
Generálny riaditel'
Dátum: 2020-10-23
MEROTEC GmbH
Unit A&B Escrick Business Park
Escrick, York YO19 6FD
Machinery Directive 2006/42/EC
EN 60335-1:2012+A11+A13+A1+A14+A2
EN 50636-2-107:2015+A1+A2
EN 62233:2008
Radio Equipment Directive 2014/53/EU
NB0123, TUV SUD Product Service GmbH Ridlerstraße 65.80339 Munich.Germany
Unit A&B Escrick Business Park
Escrick, York YO19 6FD
Vyhlásenie o zhode
My
SUMEC France Sarl
Machinery Directive 2006/42/EC
EN 60335-1:2012+A11+A13+A1+A14+A2
EN 50636-2-107:2015+A1+A2
EN 62233:2008
Radio Equipment Directive 2014/53/EU
NB0123, TUV SUD Product Service GmbH Ridlerstraße 65.80339 Munich.Germany
RoHS Directive 2011/65
Podpis:
Miesto: Saint Cyr Sur Loire
Meno: Rodolphe Dubois
Generálny riaditel'
Dátum: 2020-10-23
SUMEC France Sarl
CONSIGNES DE SÉCURITÉ SPÉCIFIQUES AU PRODUIT
natural_image
Illustration of a person standing on a fence with a lightning bolt striking the edge, no text or symbols presentDÉCLARATION DE CONFORMITÉ
Nous
MEROTEC GmbH
Machinery Directive 2006/42/EC
EN 60335-1: 2012+A11+A13+A1+A14+A2
EN 50636-2-107:2015+A1+A2
EN 62233:2008
Radio Equipment Directive 2014/53/EU
NB0123, TUV SUD Product Service GmbH Ridlerstraße 65.80339 Munich.Germany
RoHS Directive 2011/65/EU
Poland Houlon
Signature:
Lieu: Willich
Nom: Roland Menken
Directrice générale
Date: 2020-10-23
MEROTEC GmbH
Unit A&B Escrick Business Park
Escrick, York Y019 6FD
Machinery Directive 2006/42/EC
EN 60335-1: 2012+A11+A13+A1+A14+A2
EN 50636-2-107:2015+A1+A2
EN 62233:2008
Radio Equipment Directive 2014/53/EU
NB0123, TUV SUD Product Service GmbH Ridlerstraße 65.80339 Munich.Germany
RoHS Directive 2011/65/EU
M. Hall
Signature:
Lieu: YORK
Nom: Mariana Hall
Directrice générale
Date: 2020-10-23
SUMEC UK
Unit A&B Escrick Business Park
Escrick, York YO19 6FD
Nous
SUMEC France Sarl
Machinery Directive 2006/42/EC
EN 60335-1:2012+A11+A13+A1+A14+A2
EN 50636-2-107:2015+A1+A2
EN 62233:2008
Radio Equipment Directive 2014/53/EU
NB0123, TÜV SUD Product Service GmbH Ridlerstraße 65.80339 Munich.Germany
natural_image
Illustration of a person falling from a storm with a lightning bolt striking the rain, no text or symbols presentITI
DICHIARAZIONE CE
47877 Willich / Germany
Machinery Directive 2006/42/EC
EN 60335-1:2012+A11+A13+A1+A14+A2
EN 50636-2-107:2015+A1+A2
EN 62233:2008
Radio Equipment Directive 2014/53/EU
NB0123, TUV SUD Product Service GmbH Ridlerstraße 65.80339 Munich.Germany
RoHS Directive 2011/65/EU
Poland Huelan
Firma:
Luogo: Willich
Nome: Roland Menken
Direttore generale
Data: 2020-10-23
MEROTEC GmbH
47877 Willich / Germany
Unit A&B Escrick Business Park
Escrick, York YO19 6FD
Machinery Directive 2006/42/EC
EN 60335-1: 2012+A11+A13+A1+A14+A2
EN 50636-2-107:2015+A1+A2
EN 62233:2008
Radio Equipment Directive 2014/53/EU
NB0123, TUV SUD Product Service GmbH Ridlerstraße 65.80339 Munich.Germany
RoHS Directive 2011/65/EU
M. Hall
Firma:
Luogo: YORK
Nome: Mariana Hall
Direttore generale
Data: 2020-10-23
SUMEC UK
Unit A&B Escrick Business Park
Escrick, York YO19 6FD
Machinery Directive 2006/42/EC
EN 60335-1: 2012+A11+A13+A1+A14+A2
EN 50636-2-107:2015+A1+A2
EN 62233:2008
Radio Equipment Directive 2014/53/EU
NB0123, TUV SUD Product Service GmbH Ridlerstraße 65.80339 Munich.Germany
RoHS Directive 2011/65/EU
Firma:
ALGEMENE VEILIGHEIDSWAARSCHUWINGEN
WAARSCHUWING!
VEILIGHEIDSWAARSCHUWINGEN VOOR HET PRODUCT
BESCHERMING TEGEN BLIKSEM
Unit A&B Escrick Business Park
Escrick, York YO19 6FD
Machinery Directive 2006/42/EC
EN 60335-1: 2012+A11+A13+A1+A14+A2
EN 50636-2-107:2015+A1+A2
EN 62233:2008
Radio Equipment Directive 2014/53/EU
NB0123, TUV SUD Product Service GmbH Ridlerstraße 65.80339 Munich.Germany
RoHS Directive 2011/65/EU
M. Hall
Handtekening:
Plaats: YORK
Naam: Mariana Hall
Algemeen directeur
Datum: 2019. 10. 18
SUMEC UK
Unit A&B Escrick Business Park
Escrick, York YO19 6FD
Wij
MEROTEC GmbH,
47877 Willich / Germany
Machinery Directive 2006/42/EC
EN 60335-1: 2012+A11+A13+A1+A14+A2
EN 50636-2-107:2015+A1+A2
EN 62233:2008
Radio Equipment Directive 2014/53/EU
NB0123, TUV SUD Product Service GmbH Ridlerstraße 65.80339 Munich. Germany
RoHS Directive 2011/65/EU
Poland Houlan
Handtekening:
Plaats: Willich
Naam: Roland Menken
Algemeen directeur
Datum: 2019-10-18
MEROTEC GmbH,
47877 Willich, Germany
Wij
SUMEC France Sarl
Machinery Directive 2006/42/EC
EN 60335-1: 2012+A11+A13+A1+A14+A2
EN 50636-2-107:2015+A1+A2
EN 62233:2008
Radio Equipment Directive 2014/53/EU
NB0123, TUV SUD Product Service GmbH Ridlerstraße 65.80339 Munich.Germany
RoHS Directive 2011/65/EU
Handtekening:
flowchart
graph LR
A["STOP"] --> B["Robot"]
B --> C["Human Behavior"]
OCHRONA ODGROMOWA
Unit A&B Escrick Business Park
Escrick, York YO19 6FD
achinery Directive 2006/42/EC
EN 60335-1: 2012+A11+A13+A1+A14+A2
EN 50636-2-107:2015+A1+A2
EN 62233:2008
Radio Equipment Directive 2014/53/EU
NB0123, TUV SUD Product Service GmbH Ridlerstraße 65.80339 Munich. Germany
RoHS Directive 2011/65/EU
M. Hall
Podpis:
Miasto: YORK
Unit A&B Escrick Business Park
Escrick, York YO19 6FD
Firma:
MEROTEC GmbH,
achinery Directive 2006/42/EC
EN 60335-1: 2012+A11+A13+A1+A14+A2
EN 50636-2-107:2015+A1+A2
EN 62233:2008
Radio Equipment Directive 2014/53/EU
NB0123, TUV SUD Product Service GmbH Ridlerstraße 65.80339 Munich.Germany
RoHS Directive 2011/65/EU
Podpis:
Miasto: Willich
achinery Directive 2006/42/EC
EN 60335-1: 2012+A11+A13+A1+A14+A2
EN 50636-2-107:2015+A1+A2
EN 62233:2008
Radio Equipment Directive 2014/53/EU
NB0123, TUV SUD Product Service GmbH Ridlerstraße 65.80339 Munich.Germany
RoHS Directive 2011/65/EU
Podpis:
Miasto: Saint Cyr Sur Loire
