GD867 - Food Warmers BUFFALO - Free user manual and instructions

USER MANUAL GD867 BUFFALO

Position on a flat, stable surface.

A service agent/qualified technician should carry out installation and any repairs if required. Do not remove any components on this product.

Consult Local and National Standards to comply with the following:

Health and Safety at Work Legislation

BS EN Codes of Practice

Fire Precautions

IEE Wiring Regulations

Building Regulations

DO NOT immerse the appliance in water.

DO NOT touch the top of the appliance when in use. Surfaces are hot!

DO NOT store items on the top of the appliance.

DO NOT obstruct or cover the appliance in any way when in use.

DO NOT use an extension cable to power the appliance.

• Always switch off the appliance, disconnect the power supply and allow to cool before cleaning or changing/ removing parts.
  Always switch off and disconnect the power supply to the appliance when not in use.
• Keep all packaging away from children. Dispos of the packaging in accordance to the regulations of local authorities.
• If the power cord is damaged, it must be replaced by a BUFFALO agent or a recommended qualified technician in order to avoid a hazard.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety

Introduction

Please take a few moments to carefully read through this manual. Correct maintenance and operation of this machine will provide the best possible performance from your BUFFALO product.

Pack Contents

The following is included:

BUFFALO Food Warmer
- Lamp x 2
- Instruction manual

BUFFALO prides itself on quality and service, ensuring that at the time of packaging the contents are supplied fully functional and free of damage.

Should you find any damage as a result of transit, please contact your BUFFALO dealer immediately.

Installation

Remove all packaging from the appliance.1.

Position the base of the appliance in a suitable location.2.

Slot the top of the appliance onto the base.3.

Screw the top to the base using the screw supplied. The screw can be inserted into any of the 4 holes so that the height of the appliance can be adjusted.

Note: Ensure that all packaging has been removed from around the lamp.

Operation

Turn the appliance On/Off using the power switch on the stem of the appliance.1.

Note: The appliance only maintains temperature, it does NOT continue to cook food.

Cleaning, Care & Maintenance

A BUFFALO dealer or qualified technician should carry out repairs if required.

Always switch off the appliance, disconnect the power supply and allow to cool before cleaning or performing maintenance.

Troubleshooting

If your BUFFALO appliance develops a fault, please check the following table before making a call to the Helpline.

Fault	Probable Cause	Action
The appliance is not working	The appliance is not switched on	Check the appliance is plugged in correctly and switched on
	Plug and lead are damaged	Call BUFFALO agent or qualified technician
	Fuse in the plug has blown	Replace the plug fuse
	Power supply	Check power supply
	Lamp expired	Replace lamp, part number AE307.

Technical Specifications

Model	Voltage	Power	Current	Dimensions h x w x d (mm)	Weight
GD867	230V 50Hz	500W	2.2A	800 x 355 x 530	1.8 kg

Electrical Wiring

The plug is to be connected to a suitable mains socket.

This appliance is wired as follows:

Live wire (coloured brown) to terminal marked L

Neutral wire (coloured blue) to terminal marked N

Earth wire (coloured green/yellow) to terminal marked E

This appliance must be earthed, using a dedicated earthing circuit.

If in doubt consult a qualified electrician.

Electrical isolation points must be kept clear of any obstructions. In the event of any emergency disconnection being required they must be readily accessible.

Compliance

The WEEE logo on this product or its documentation indicates that the product must not be disposed of as household waste. To help prevent possible harm to human health and/or the environment, the product must be disposed of in an approved and environmentally safe recycling process. For further information on how to dispose of this product correctly, contact the product supplier, or the local authority responsible for waste disposal in your area.

BUFFALO parts have undergone strict product testing in order to comply with regulatory standards and specifications set by international, independent, and federal authorities.

BUFFALO products have been approved to carry the following symbol:

All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of BUFFALO. Every effort is made to ensure all details are correct at the time of going to press, however, BUFFALO reserve the right to change specifications without notice.

Veiligheidstips

DECLARATION OF CONFORMITY

• Conformiteitsverklaring - Déclaration de conformité - Konformitätserklärgung - Dichiarazione di conformità - Declaración de conformidad - DeclARATION de conformidade -

Equipment Type • Ultrustingstype • Type d'équipement • Gerätotyp • Tipo di apparecchiatura • Tipo de equipo • Tipo de equipamento:

Model · Modèle · Modell · Modello · Modelo · Malli

Application of Council Directives(s)

Toepassing van Europese Richtlijn(en) · Application de la/des directive(s) du Conseil · Anwendbare EU-Richtlinie(n) · Applicazione delle Direttive · Aplicacion de la(s) directiva(s) del consejo · Aplicacao de directiva(s) do Conselho

Standards • Standaarden • Normes • Normen • Standard • Estandares • Normas:

LVD Directive 2006/95/EC RoHS Directive 2002/95/EC

EN 60598-1:2004+AI:2006 EN 60598-2-4:1997

Buffalo

Fourth Way, Avonmouth, Bristol, BS1 8TB United Kingdom

I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s) and Standard(s).