3851 - Kitchen scales Taylor - Free user manual and instructions

Product Type	Digital Kitchen Scale
Brand	Taylor
Model	3851
Maximum Capacity	33 lb / 530 oz / 15 kg / 15000 g
Accuracy	0.1 oz (pounds/ounces); 2 g (grams/kilograms)
Measurement Units	lb oz, oz, g, kg
Power	2 AAA batteries (included)
Tare Function	Yes, via TARE button
HOLD Function (weight lock)	Yes
Auto Shut-off	After 1 minute of inactivity
Display	Digital
Care and Cleaning	Soft damp cloth, mild soap; do not immerse
Safety	Do not exceed capacity; do not disassemble; remove batteries if not used for extended period
Warranty	1 year limited (excluding batteries)
Compliance	FCC Part 15, Class B
Intended Use	Residential only (not commercial or medical)
Package Contents	Scale, 2 AAA batteries, instruction manual

Frequently Asked Questions - 3851 Taylor

How do I install the batteries in the Taylor 3851 scale?

Open the battery compartment cover on the bottom of the device. Insert 2 AAA batteries respecting the + and - polarities, then close the cover.

How do I change the measurement unit (lb, oz, g, kg)?

Press the UNIT button to toggle between available units: pounds/ounces (lb oz), ounces (oz), grams (g), and kilograms (kg).

What does the display 'O-Ld' mean?

'O-Ld' indicates an overload warning: the weight exceeds the maximum capacity of the scale (33 lb / 15 kg). Immediately remove the weight to avoid damaging the device.

What does the display 'Err' mean?

'Err' means the scale is unstable. Place it on a hard, level surface before weighing.

How do I use the HOLD function?

If a large container blocks the display, press the HOLD button to lock the displayed weight. Remove the object, then press HOLD again to release the locked weight.

How do I tare the scale?

Place an empty container on the scale, turn it on, then press TARE to zero the display. Then add ingredients; only their weight will be shown.

What is the maximum capacity of the scale?

The scale can weigh up to 33 lb / 530 oz / 15 kg / 15000 g. Do not exceed this limit to avoid damage.

How do I clean the Taylor 3851 scale?

Clean surfaces with a soft damp cloth and mild soap. Never use harsh detergents, sprays, or excessive water. Do not immerse the scale in water.

What should I do if the display shows 'Lo'?

'Lo' means the batteries are low. Replace both AAA batteries with new ones. Always use the same type of batteries to avoid inaccurate readings.

Is the Taylor 3851 scale covered by a warranty?

Yes, a one-year limited warranty is offered to the original purchaser against defects in materials and workmanship (excluding batteries). Keep the receipt.

USER MANUAL 3851 Taylor

Thank you for purchasing a Taylor® digital kitchen scale. Your Taylor® scale is an example of superior design and craftsmanship. Please read this instruction manual carefully before use. Keep these instructions handy for future reference.

Battery Installation

1. This scale operates on 2 "AAA" batteries (included). Remove any plastic wrap from the batteries before proceeding. Always replace all batteries at the same time; do not combine old and new batteries. Do not mix Alkaline, carbon-zinc (standard) or Nickel-Cadmium (rechargeable) batteries.

2. Open the battery compartment cover on the bottom of the scale.

3. Place the batteries into the battery compartments according to the "+" and "-" polarity symbols in the battery compartment.

4. Replace the battery cover.

5. Replace the batteries when "Lo" appears on the display, or the readings grow dim or irregular.

NOTE: Please recycle or dispose of batteries per local regulations.

WARNING: Batteries may pose a choking hazard. As with all small items, do not let children handle batteries. If swallowed, seek medical attention immediately.

PRECAUTION: Do not dispose of batteries in fire. Batteries may explode or leak. Remove the batteries if the scale will not be used for a long period of time.

General Weighing Operation

1. Place the scale on a hard, level surface.

2. Press "☐/TARE" button to turn the scale on. The display will show "88888" then zero when it is ready for use.

3. Your scale weighs in pounds/ounces (lb:oz), grams (g), ounces (oz) and kilograms (kg). Press the "UNIT" button to change the units of measurement.

4. Use the "HOLD" button when a large plate or container is placed on the platform and you are unable to read the display clearly. Press the "HOLD" button to lock in the current weight. Remove the item blocking the display and the weight will still be displayed. Put the item back on the center of the weighing platform and press the "HOLD" button again to release the locked weight, the scale is now actively weighing. Either add additional weight to the scale or press "☐/TARE" to zero out the current weight.

5. The scale will turn off automatically within 1 minute of non-use or if the weight is unstable. To turn the scale off manually, press and hold the "TARE" button until the scale turns off.

Tare Operation

You may wish to weigh ingredients in a bowl or other container (not included). In this case, you will need to take, or offset, the weight of the bowl so that only the weight of the ingredients is displayed.

1. Choose a container that will safely balance on the platform without tipping or falling. Do not use a heavy container, as this might reduce the maximum capacity of the scale.
2. While the scale is off, place the empty container on the scale platform. Turn the scale on. The display will turn on and then show zero. The weight of the container has been zeroed out.
3. Add the ingredient to be weighed. The weight of the ingredient alone will display.
4. The weight of additional ingredients may be tared out as well. For example, if a recipe calls for 1 lb rice and 1 lb beans, place the rice into the bowl. Once the correct amount of rice is weighed, press "☐/TARE" to reset the display to zero. Add the 1 lb of beans. Both ingredients have been accurately weighed in the same bowl.
5. When weights have been tared out, the display will show a “----” when the items are removed from the scale. To reset the scale back to zero for a new measurement, press “QTARE” to reset the display to zero.

Precautions

1. Clean exposed parts with a soft, slightly damp cloth. To remove stains, use a mild soap. Never use detergents, excess water, treated cloths, harsh cleaning agents, or sprays. Avoid contact with acids, such as citrus juices. DO NOT immerse the electronic scale in water or wash in a dishwasher.
2. Do not tamper with the scale's internal components. Doing so will invalidate the warranty on this unit and may cause damage. The scale contains no user-serviceable parts.

3. Although your scale is designed to be maintenance-free, it contains sensitive electronic parts. Avoid rough treatment. Treat it with care to ensure the best performance.

4. This scale is intended for home/consumer use only. It is not intended for commercial or medical use.

5. This scale is designed to read weights up to 33 lb x 0.1 oz / 530 oz x 0.1 oz / 15 kg x 2 g / 15000 g x 2 g. To prevent damage, do not place more than 33 lb / 530 oz/ 15 kg / 15000g on the scale.
6. "O-Ld" = Overload Warning: Should "O-Ld" appear on the display during a weighing, this indicates that the maximum weighing capacity has been exceeded. Remove the weight immediately otherwise permanent damage could occur.
7. Do not store scale where you store cleaning chemicals. The vapors from some household products may affect the electronic components of your scale. Do not store scale on its side.
8. This scale is an extremely sensitive weighing device. In order to prevent run down of the battery, do not store anything on the scale.
9. Do not dispose of batteries in fire. Batteries may explode or leak. Remove the batteries if the scale will not be used for a long period of time.
10. "Err" = Instability Error. Should "Err" appear on the display, this indicates the scale is unstable. Place the scale on a hard, level surface during use.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

One (1) Year Limited Warranty

Taylor® warrants this product to be free from defects in material or workmanship (excluding batteries) for one (1) year for the original purchaser from date of retail purchase. It does not cover damages or wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment and/or repair. If service is required, do not return to retailer. Should this product require service (or replacement at our option), please pack the item carefully and return it prepaid, along with store receipt showing the date of purchase and a note explaining reason for return to:

Taylor Precision Products

2220 Entrada Del Sol, Suite A

Las Cruces, New Mexico 88001 USA

www.shoptaylorusa.com

Email: [e-mail]

There are no expressed warranties except as listed above. This warranty gives you specific legal rights, and you may have other rights which vary from state to state.

For additional product information, or warranty information outside the USA, please contact us through www.shoptaylorusa.com.

©2017 Taylor Precision Products and its affiliated companies, all rights reserved. Taylor® is a registered trademark of Taylor Precision Products and its affiliated companies. All rights reserved.

Made to our exact specifications in China.

Not legal for trade.

Taylor Precision Products

2220 Entrada Del Sol, Suite A

Las Cruces, New Mexico 88001 USA

www.shoptaylorusa.com

Email: [e-mail]

Taylor Precision Products

2220 Entrada Del Sol, Suite A

Las Cruces, New Mexico 88001 USA

www.shoptaylorusa.com

Email: [e-mail]