OLIVETTI d-Copia 404MFen - Multifunction Printer

d-Copia 404MFen - Multifunction Printer OLIVETTI - Free user manual and instructions

Find the device manual for free d-Copia 404MFen OLIVETTI in PDF.

📄 527 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice OLIVETTI d-Copia 404MFen - page 31
View the manual : Français FR English EN
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Multifunction printer (copy, print, scan, optional fax)
Dimensions (W × D × H) Approximately 565 × 650 × 630 mm
Weight Approximately 45 kg
Power supply 220 – 240 V AC, 50/60 Hz
Main functions Copy, print, scan, email/FTP send, document box, fax (option)
Print speed (A4) Up to 40 ppm (black & white) / 40 ppm (color)
Print resolution Up to 1200 × 1200 dpi
Standard paper capacity Tray 1: 250 sheets (80 g/m²); Bypass tray: 50 sheets
Supported paper sizes A4, A5, A6, B5, Legal, Letter, Hagaki, envelopes, custom sizes
Paper weight Tray: 60 – 163 g/m²; Bypass tray: 60 – 220 g/m²
Automatic duplex Yes (copy, print)
Scanning Color, grayscale, black & white scanning; resolution up to 600 × 600 dpi
Network connectivity Ethernet 10/100Base-TX, USB 2.0, optional Wi-Fi
Network protocols TCP/IP (IPv4/IPv6), NetBEUI, AppleTalk, IPX/SPX, IPSec
Display Color touchscreen (display menus, status)
Maintenance and cleaning Cleaning the slit glass, separator; toner cartridge and waste toner box replacement
Safety Class 1 laser; auto power-off; ENERGY STAR certified
Spare parts and repairability Toner cartridges (CMYK), waste toner box, fuser unit, document feeder (option)
General information Brand: Olivetti; Model: d-Copia 404MFen; Manual: 527 pages

Frequently Asked Questions - d-Copia 404MFen OLIVETTI

How to load paper in the tray?
Fully pull out the tray. Rotate the dial to the desired size. Adjust the width and length guides. Place the paper with the print side facing up, without exceeding the level indicator. Reinsert the tray and select the media type in the menu Common Settings > Paper/Original Settings.
What to do in case of a paper jam?
Follow the on-screen instructions. Open the top cover, rear cover, or document feeder depending on the location. Gently remove the jammed paper by pulling in the indicated direction. Close all covers. If the problem persists, refer to the Troubleshooting chapter (page 10-18).
How to replace the toner cartridge?
Open the top cover. Remove the used cartridge by pulling it toward you. Take out the new cartridge from its packaging, shake it gently to distribute the toner, then insert it until it clicks. Close the cover. The replacement message disappears. Refer to the Maintenance page (page 9-4) for more details.
How to set up the printer on the network?
Connect the LAN cable. Press System Menu/Counter, go to System > Network Settings > TCP/IP Settings. Enable TCP/IP, then in IPv4 Settings, choose DHCP for automatic assignment or manually enter IP address, subnet mask, and gateway. Restart the machine.
How to scan a document to a computer?
Place the original on the exposure glass or in the feeder. Press Send. Select the destination (SMB, FTP, or email) via the address book or direct entry. Adjust settings (format, resolution, color) if necessary. Press Start. Data is sent according to the chosen protocol.
How to use the fax function?
This function is only available if the fax is installed. Connect the telephone line to the LINE connector. Press FAX on the panel. Enter the number using the numeric keypad or select a registered destination. Press Start. For more details, refer to the FAX User's Guide.
How to reduce energy consumption?
Use Sleep mode by pressing the Power key. Automatic sleep activates after 1 minute of inactivity. To save more, set the Sleep Level in System Menu > Common Settings > Date/Timer > Sleep Level.
What paper types are compatible with the bypass tray?
The bypass tray accepts sizes A4 to A6, Hagaki, envelopes (DL, C5, #10, etc.) and custom sizes. Paper weight can be from 60 to 220 g/m². For transparencies, load one sheet at a time. Select the media type in the bypass tray settings (Common Settings > Paper/Original Settings > Bypass Settings).
How to clean the slit glass (scanner)?
Turn off the machine. Open the document feeder cover. Clean the slit glass (narrow strip to the left of the platen) with a soft, dry cloth. If necessary, slightly moisten the cloth with water. Close the cover. Avoid solvents. See Maintenance page (9-2).
How to configure email sending?
Connect the machine to the network. Use the Embedded Web Server (machine's IP address in a browser). Go to Advanced Settings > E-mail: SMTP. Enable SMTP protocol, enter the SMTP server name, port (25), and sender address. Click Submit. You can then send emails from the control panel.

User questions about d-Copia 404MFen OLIVETTI

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Multifunction Printer in PDF format for free! Find your manual d-Copia 404MFen - OLIVETTI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. d-Copia 404MFen by OLIVETTI.

USER MANUAL d-Copia 404MFen OLIVETTI

Copyright © 2011, Olivetti

DVD (Product Library)

Printer Driver Operation Guide

Network FAX Driver Operation Guide

Network Tool for Direct Printing Operation Guide

Network Print Monitor User Guide

Copyright (c) 1998-2006 OpenSSL Project. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1 Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2 Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3 All advertising materials mentioning features or use of this software must display the following acknowledgment:
"This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)
4 The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission.
For written permission, please contact openssl-core@openssl.org.
5 Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project.
6 Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Original SSLeay License

This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscapes SSL.

This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com).

Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed.

If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used.

This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1 Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.

2 Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3 All advertising materials mentioning features or use of this software must display the following acknowledgement:

"This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)" The word ‘cryptographic’ can be left out if the rouines from the library being used are not cryptographic related :-).

4 If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement:

"This product includes software written by Tim Hudson (tjh@cryptsoft.com)"

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The licence and distribution terms for any publicly available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.]

Monotype Imaging License Agreement

1 Software shall mean the digitally encoded, machine readable, scalable outline data as encoded in a special format as well as the UFST Software.
2 You agree to accept a non-exclusive license to use the Software to reproduce and display weights, styles and versions of letters, numerals, characters and symbols (Typefaces) solely for your own customary business or personal purposes at the address stated on the registration card you return to Monotype Imaging. Under the terms of this License Agreement, you have the right to use the Fonts on up to three printers. If you need to have access to the fonts on more than three printers, you need to acquire a multi-user license agreement which can be obtained from Monotype Imaging. Monotype Imaging retains all rights, title and interest to the Software and Typefaces and no rights are granted to you other than a License to use the Software on the terms expressly set forth in this Agreement.
3 To protect proprietary rights of Monotype Imaging, you agree to maintain the Software and other proprietary information concerning the Typefaces in strict confidence and to establish reasonable procedures regulating access to and use of the Software and Typefaces.
4 You agree not to duplicate or copy the Software or Typefaces, except that you may make one backup copy. You agree that any such copy shall contain the same proprietary notices as those appearing on the original.
5 This License shall continue until the last use of the Software and Typefaces, unless sooner terminated. This License may be terminated by Monotype Imaging if you fail to comply with the terms of this License and such failure is not remedied within thirty (30) days after notice from Monotype Imaging. When this License expires or is terminated, you shall either return to Monotype Imaging or destroy all copies of the Software and Typefaces and documentation as requested.
6 You agree that you will not modify, alter, disassemble, decrypt, reverse engineer or decompile the Software.
7 Monotype Imaging warrants that for ninety (90) days after delivery, the Software will perform in accordance with Monotype Imaging-published specifications, and the diskette will be free from defects in material and workmanship. Monotype Imaging does not warrant that the Software is free from all bugs, errors and omissions.
The parties agree that all other warranties, expressed or implied, including warranties of fitness for a particular purpose and merchantability, are excluded.
8 Your exclusive remedy and the sole liability of Monotype Imaging in connection with the Software and Typefaces is repair or replacement of defective parts, upon their return to Monotype Imaging.
In no event will Monotype Imaging be liable for lost profits, lost data, or any other incidental or consequential damages, or any damages caused by abuse or misapplication of the Software and Typefaces.
9 Massachusetts U.S.A. law governs this Agreement.
10 You shall not sublicense, sell, lease, or otherwise transfer the Software and/or Typefaces without the prior written consent of Monotype Imaging.
11 Use, duplication or disclosure by the Government is subject to restrictions as set forth in the Rights in Technical Data and Computer Software clause at FAR 252-227-7013, subdivision (b)(3)(ii) or subparagraph (c)(1)(ii), as appropriate. Further use, duplication or disclosure is subject to restrictions applicable to restricted rights software as set forth in FAR 52.227-19 (c)(2).
12 You acknowledge that you have read this Agreement, understand it, and agree to be bound by its terms and conditions. Neither party shall be bound by any statement or representation not contained in this Agreement. No change in this Agreement is effective unless written and signed by properly authorized representatives of each party. By opening this diskette package, you agree to accept the terms and conditions of this Agreement.

Programme Energy Star (ENERGY STAR®)

Technical diagram of a printer internal structure with numbered parts for identification

13 14 15 16 17 18 19

Network Tool for Direct Printing Operation Guide

Network Print Monitor User Guide

natural_image Illustration of a hand inserting a plug into an electrical outlet with a power outlet (no text or symbols)
natural_image Diagram showing cable insertion into a device component, with an arrow indicating cable attachment (no text or symbols present)

Adresse IP 123.145.167.189

Illustration showing four sequential steps of a folding or rolling process with arrows indicating direction and movement.

natural_image Illustration of hands installing a device into a rack with an arrow indicating process (no text or symbols present)

OLIVETTI d-Copia 404MFen - Programme Energy Star (ENERGY STAR®) - 5

natural_image Technical line drawing of a mechanical component with an inset magnified view showing a hand operating a tool (no text or symbols present)

Technical diagram showing a hand holding a mechanical component with directional arrows, alongside an inset view of a device's internal structure.

natural_image Technical line drawing of a mechanical component with an inset close-up showing a bracket detail (no text or symbols)
natural_image Illustration of hands installing or adjusting a device into a machine (no text or symbols visible)
natural_image Line drawing of a printer or printer with a close-up inset showing a small component (no text or symbols)
natural_image Illustration of hands installing or removing a device into a tray (no text or symbols visible)

OLIVETTI d-Copia 404MFen - Programme Energy Star (ENERGY STAR®) - 7

natural_image Technical line drawing of a mechanical component with an inset showing a vertical bar and double-headed arrow (no text or symbols)

OLIVETTI d-Copia 404MFen - Programme Energy Star (ENERGY STAR®) - 8

natural_image Line drawing of a hand placing a document into a rack with an arrow indicating direction (no text or symbols)
natural_image Illustration of a printer being inserted into a paper holder, showing hand placement and internal structure (no text or symbols)
natural_image Diagram of a printer's base panel being inserted, showing hand placement and paper tray (no text or symbols)

Diagram showing car interior with dashboard and front view, highlighting a directional arrow on the dashboard panel

natural_image Illustration of a printer's door panel being inserted into a printer, showing hand positioning and close-up of the door (no text or symbols present)
natural_image Diagram of a printer's internal structure showing a hand pressing down on a tray (no text or symbols present)

Diagram showing car interior and dashboard components with labeled parts and a directional arrow indicating movement or force.

natural_image Line drawing of two hands holding a piece of paper or cloth (no text or symbols)
natural_image Simple line drawing of a mechanical component with an arrow indicating rotation (no text or symbols)

2

natural_image Technical line drawing of a mechanical device with an inset close-up showing a hand operating a component (no text or symbols present)

OLIVETTI d-Copia 404MFen - Programme Energy Star (ENERGY STAR®) - 11

OLIVETTI d-Copia 404MFen - Programme Energy Star (ENERGY STAR®) - 12

natural_image Technical line drawing of a mechanical assembly with an inset showing a hand operating a component (no text or symbols present)

OLIVETTI d-Copia 404MFen - Programme Energy Star (ENERGY STAR®) - 13

OLIVETTI d-Copia 404MFen - Programme Energy Star (ENERGY STAR®) - 14

natural_image Line drawing of an open printer with a tray and control panel (no text or symbols)
natural_image Line drawing of a person using a computer to open a device (no text or symbols visible)
natural_image Line drawing of a printer with arrows indicating motion or assembly (no text or symbols)
natural_image Illustration of a hand inserting a card into a printer (no text or symbols visible)
natural_image Illustration of a printer being scanned into a paper, showing the paper being inserted (no text or symbols present)
natural_image Line drawing of a printer with an open lid and paper being placed (no text or symbols)
natural_image Line drawing of a printer with paper and paper sheet (no text or symbols)

[Bord sup. haut] [Bord sup. gauche]

OLIVETTI d-Copia 404MFen - Programme Energy Star (ENERGY STAR®) - 15

natural_image Line drawing of a printer with a grid-patterned cover (no text or symbols)
natural_image Line drawing of a printer with a screen labeled 'A' (no text or symbols on the device itself)

[Bord sup. haut]

OLIVETTI d-Copia 404MFen - Programme Energy Star (ENERGY STAR®) - 16

natural_image Line drawing of a printer with a screen and control panel (no text or symbols)

[Bord sup. gauche]

natural_image Line drawing of a printer with a paper sheet labeled 'A' on the screen (no text or symbols beyond label)

[Bord sup. haut] [Bord sup.

OLIVETTI d-Copia 404MFen - Programme Energy Star (ENERGY STAR®) - 17

natural_image Line drawing of a printer with a grid-patterned front panel (no text or symbols)

gauche]

natural_image Line drawing of a printer with a paper labeled 'A' (no text or symbols on the device itself)

[Bord sup. haut]

OLIVETTI d-Copia 404MFen - Programme Energy Star (ENERGY STAR®) - 18

natural_image Line drawing of a printer with a screen and control panel (no text or symbols)

[Bord sup. gauche]

natural_image Line drawing of a device casing with a handle and arrow indicating direction (no text or symbols)
natural_image Line drawing of a mechanical device with a button and arrow indicating direction (no text or symbols)

Confirm dest ✓ Morgan@olivetti [Quitter ]

Bac MF dimen 12 16K 13 ISO B5 14 *Envelop. #10

Bac MF dimen 12 16K 13 ISO B5 14*Envelop. #10

Structure Menus MFP Firmware Version

Page d'état

bar Color Registration Correction Chart | Sequence | Color Value | |---|---| | 1 | 3 G E C A 3 3 7 9 T F D B 4 6 H | | 2 | 2 G | | 3 | 1 G E C A 3 3 7 9 T F E R 0 4 6 H | | 4 | 2 G | | 5 | 1 G E C A 1 3 3 7 9 T F E R 0 4 6 H | | 6 | 2 G | | 7 | 1 G E C A 1 3 3 7 9 T F E R 0 4 6 H | | 8 | 2 G | | 9 | 1 G E C A 1 3 3 7 9 T F E R 0 4 6 H | | 10 | 2 G | | 11 | 1 G E C A 1 3 3 7 9 T F E R 0 4 6 H | | 12 | 2 G | | 13 | 1 G E C A 1 3 3 7 9 T F E R 0 4 6 H | | 14 | 2 G | | 15 | 1 G E C A 1 3 3 7 9 T F E R 0 4 6 H | | 16 | 2 G | | 17 | 1 G E C A 1 3 3 7 9 T F E R 0 4 6 H | | 18 | 2 G | | 19 | 1 G E C A 1 3 3 7 9 T F E R 0 4 6 H | | 20 | 2 G | | 21 | 1 G E C A 1 3 3 7 9 T F E R 0 4 6 H | | 22 | 2 G | | 23 | 1 G E C A 1 3 3 7 9 T F E R 0 4 6 H | | 24 | 2 G | | 25 | 1 G E C A 1.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5.5. | Sequence | Color Value | |---|---| | -1 | Green L | | -2 | Pink L | | -3 | Pink L | | -4 | Pink L | | -5 | Pink L | | -6 | Pink L | | -7 | Pink L | | -8 | Pink L | | -9 | Pink L | | -10 | Pink L | | -11 | Pink L | | -12 | Pink L | | -13 | Pink L | | -14 | Pink L | | -15 | Pink L | | -16 | Pink L | | -17 | Pink L | | -18 | Pink L | | -19 | Pink L | | -20 | Pink L | | -21 | Pink L | | -22 | Pink L | | -23 | Pink L | | -24 | Pink L | | -25 | Pink L | | -26 | Pink L | | -27 | Pink L | | -28 | Pink L | | -29 | Pink L | | -30 | Pink L | | -31 | Pink L | | -32 | Pink L | | -33 | Pink L | | -34 | Pink L | | -35 | Pink L | | -36 | Pink L | | -37 | Pink L | | -38 | Pink L | | -39 | Pink L | | -40 | Pink L | | -41 | Pink L | | -42 | Pink L | | -43 | Pink L | | -44 | Pink L | | -45 | Pink L | | -46 | Pink L | | -47 | Pink L | | -48 | Pink L | | -49 | Pink L | | -50 | Pink L | | -51 | Pink L | | -52 | Pink L | | -53 | Pink L | | -54 | Pink L | | -55 | Pink L | | -56 | Pink L | | -57 | Pink L | | -58 | Pink L | | -59 | Pink L | | -60 | Pink L | | -61 | Pink L | | -62 | Pink L | | -63 | Pink L | | -64 | Pink L | | -65 | Pink L | | -66 | Pink L | | -67 | Pink L | | -68 | Pink L | | -69 | Pink L | | -70 | Pink L | | -71 | Pink L | | -72 | Pink L | | -73 | Pink L | | -74 | Pink L | | -75 | Pink L | | -76 | Pink L | | -77 | Pink L | | -78 | Pink L | | -79 | Pink L | | -80 | Pink L | | -81 | Pink L | | -82 | Pink L | | -83 | Pink L | | -84 | Pink L | | -85 | Pink L | | -86 | Pink L | | -87 | Pink L | | -88 | Pink L | | -89 | Pink L | | -90 | Pink L | | -91 | Pink L | | -92 | Pink L | | -93 | Pink L | | -94 | Pink L | | -95 | Pink L | | -96 | Pink L | | -97 | Pink L | | -98 | Pink L | | -99 | Pink L | | -100: The image contains only the original text in the code.

Normal 01 Impr. mire 02 Ajuster magenta 03 Ajuster cyan

Détails 01 Impr. mire 02 Ajuster magenta 03 Ajuster cyan

Configuration NetWare

Configuration AppleTalk

natural_image Line drawing of a hand operating a printer with a cloth on the cover (no text or symbols visible)
natural_image Illustration of a hand inserting a device into a computer case, showing the arrow indicating direction (no text or symbols present)
natural_image Diagram of a car interior showing a hand inserting a component into the engine compartment, with an arrow indicating direction (no text or symbols present)
natural_image Illustration of a hand holding a device with an inset showing a close-up of its screen (no text or symbols present)
natural_image Diagram of hands installing or adjusting a mechanical component inside a vehicle chassis (no text or symbols visible)
natural_image Diagram showing a printer being inserted into a door panel, with a hand adjusting the part (no text or symbols present)

OLIVETTI d-Copia 404MFen - Configuration AppleTalk - 1

natural_image Illustration of hands using a tool to adjust or install a component, with an inset showing a close-up of the component (no text or symbols present)

OLIVETTI d-Copia 404MFen - Configuration AppleTalk - 2

natural_image Simple line drawing of a cylindrical object with an arrow indicating direction (no text or symbols)

OLIVETTI d-Copia 404MFen - Configuration AppleTalk - 3

natural_image Illustration of hands inserting a device into a device, showing internal components and directional arrows (no text or symbols)
natural_image Line drawing of a hand inserting a card into a printer holder (no text or symbols)
natural_image Illustration of a printer's internal structure being inserted into a device, with no visible text or symbols
natural_image Technical diagram showing a device interior with a close-up view of the internal structure (no text or symbols visible)
natural_image Illustration of a hand inserting a device into a computer tower (no text or symbols visible)
natural_image Illustration of a hand inserting a component into a computer monitor (no text or symbols visible)
natural_image Line drawing of a printer with a paper airplane, showing internal components and no text or symbols.
natural_image Illustration of a hand printing a document into a printer with an arrow indicating the process (no text or symbols present)
natural_image Line drawing of a printer with a hand holding a tool, showing internal components and no text or symbols.
natural_image Illustration of a hand pressing down on a printer's tray with a black arrow indicating compression (no text or symbols present)

3 Retirer l'original coincé.

natural_image Illustration of hands installing or adjusting a device panel with an upward arrow (no text or symbols)
natural_image Illustration of a hand inserting a device into a printer with a right-pointing arrow (no text or symbols)

5 Retirer l'original coincé.

natural_image Line drawing of two hands holding a ruler (no text or symbols present)

Incorrect
OLIVETTI d-Copia 404MFen - Configuration AppleTalk - 4

natural_image Line drawing of a hand holding a ruler, no text or symbols present
natural_image Hand inserting a card into a printer (no text or symbols visible)
natural_image Three-panel image showing a hand-drawn paperclip pattern on a light background, with arrows indicating left, middle, and right transitions (no text or symbols)
natural_image Three-panel image showing a row of colored pencils with different colors and shading, separated by arrows (no text or symbols)
natural_image Row of colorful pencils in blue, yellow, orange, and pink hues (no text or symbols visible)

DHCP (Dynamic Host Configuration Protocol)

KPDL (Kyocera Page Description Language)

NetBEUI (NetBIOS Extended User Interface)

TWAIN (Technology Without Any Interested Name)

WIA (Windows Imaging Acquisition)

activation/désactivation 11-4

Activation/désactivation de l'authen- tification de groupe 11-12

Assembler/Décaler 8-42

Densité 8-37

EcoPrint 8-43

Impression TIFF 8-44

Nom de fichier 8-39

annulation 3-50, 7-19

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : OLIVETTI

Model : d-Copia 404MFen

Category : Multifunction Printer