BESTWAY SaluSpa 60162 - Pool

SaluSpa 60162 - Pool BESTWAY - Free user manual and instructions

Find the device manual for free SaluSpa 60162 BESTWAY in PDF.

English EN Download 💬 AI Question 10 questions ⚙️ Specs
📄

Document temporarily unavailable

The manual is currently being transferred to our new server. It will be accessible again in a few hours. Thank you for your patience.

View the manual : Français FR English EN Português PT
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Inflatable spa SaluSpa
Brand Bestway
Model 60162
Power supply 110-120 V AC, 60 Hz, single phase, 12 A at 20 °C
Temperature range 20 °C to 40 °C (68 °F to 104 °F)
Heating capacity Heating element 11.3 A, filter pump 0.7 A, massage tube 12 A, jet pump 6.5 A
Main functions Heating, HydroJet system, 2-level massage, filtration, energy-saving timer, Freeze Shield antifreeze, Wi-Fi (depending on model)
Maintenance and cleaning Filter cartridge to change weekly, cleaning with mild soap, chemical water treatment (pH 7.4-7.6, alkalinity 80-120 ppm, free chlorine 2-4 ppm)
Safety Ground fault circuit interrupter (GFCI) integrated, automatic child lock, protective cover, detailed safety instructions
Spare parts and repairability PVC repair patch provided, replaceable seals and fittings, standard filter cartridge
General information Indoor/outdoor use, flat and sturdy surface required, heating time varies according to ambient temperature (e.g., 23-40 h at 10 °C to reach 40 °C)

Frequently Asked Questions - SaluSpa 60162 BESTWAY

How to install the SaluSpa 60162 spa?
Choose a flat, smooth, and sturdy surface (grass, concrete). Unpack the liner, inflate it with the built-in pump (do not use a compressor). Fill with water to the indicated level, then plug in the pump. Follow the diagrams in the manual for connections.
What is the ideal water temperature?
The recommended temperature for a healthy adult is between 38 °C and 40 °C. For children or pregnant women, do not exceed 38 °C. Always use an accurate thermometer.
How to maintain the spa water?
Clean the filter cartridge daily and change it weekly. Use chlorine or bromine tablets with a dispenser. Maintain pH between 7.4 and 7.6 and alkalinity between 80 and 120 ppm. Test the water regularly with a kit.
What to do if the pump does not heat?
Check that the set temperature is sufficient, clean the filter cartridge, ensure the spa is covered, and that the circuit breaker has not tripped. If the problem persists, consult Bestway support.
How to activate the Freeze Shield antifreeze function?
The Freeze Shield activates automatically when the outside temperature drops below 6 °C. It keeps the water between 6 °C and 10 °C. Leave the heater on permanently in winter to prevent freezing.
What are the common error codes?
The manual lists several codes: E03 (water temperature too low), sensor fault, overheating, etc. In case of alarm, unplug the pump and consult the Troubleshooting section of the manual or the Bestway website.
Can I use the spa in winter?
Yes, provided the outside temperature does not drop below -10 °C. The Freeze Shield must be active. If the temperature is below 6 °C, the heater must remain on permanently.
How to clean and store the spa?
Drain the water, clean the liner with mild soap, dry the pump and hoses completely. Fold the liner at a temperature above 10 °C and store it in a dry place between 10 °C and 38 °C.
What to do in case of a water leak?
If the liner is punctured, use the provided repair patch: clean the area, apply the patch and wait 30 seconds. If the leak comes from the fittings, check the seals and tighten the adapters.
How to connect the Wi-Fi?
Make sure your router emits on 2.4 GHz. Follow the instructions of the Bestway app. If connection fails, check the router proximity and absence of interference. The Wi-Fi LED flashes slowly when waiting.

User questions about SaluSpa 60162 BESTWAY

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Pool in PDF format for free! Find your manual SaluSpa 60162 - BESTWAY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SaluSpa 60162 by BESTWAY.

USER MANUAL SaluSpa 60162 BESTWAY

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : BESTWAY

Model : SaluSpa 60162

Category : Pool