Atlanta - Earphones Urbanista - Free user manual and instructions

Product type	True Wireless In-Ear Headphones
Brand	Urbanista
Model	Atlanta
Connectivity	Bluetooth (multipoint up to 2 devices)
Active Noise Cancellation (ANC)	Yes, with Transparency mode
Touch controls	Yes (double/triple tap, customizable long press)
Voice assistant	Yes (activation by long press on left)
Mobile app	Urbanista Audio (iOS and Android)
Charging case charging	USB Type-C
Battery LED indicator	Yes (orange when charging, white when fully charged)
Silicone ear tips	Included (multiple sizes)
Power on/off	Automatic upon opening/closing the case
Auto-off	After 5 minutes of inactivity
Reset	Via button in the case or closing procedure
Multipoint connectivity	Yes, simultaneous connection to two devices
Care and cleaning	Clean with a soft, dry cloth; avoid moisture
Safety	Do not expose to liquids or extreme temperatures
Spare parts and repairability	Silicone ear tips available; built-in battery not replaceable
General information	See the full manual on Urbanista website

Frequently Asked Questions - Atlanta Urbanista

How do I perform the first pairing of the Atlanta earbuds with my phone?

Open the charging case, then go to your device's Bluetooth settings and select Urbanista Atlanta. The LED will turn off once the connection is established. The earbuds will automatically reconnect to the last paired device.

What should I do if my Atlanta earbuds no longer connect?

Place the earbuds in the case, close the lid for 10 seconds, then reopen it. If the problem persists, perform a factory reset: remove the device from the Bluetooth list, then with the earbuds in the case, press the reset button (2) for 10 seconds until the LEDs light up continuously.

How do I use the multipoint function to connect two devices at the same time?

Open the case to activate pairing mode. First connect one device, then on the second device, search for Urbanista Atlanta in Bluetooth settings and connect. The earbuds remember up to 8 devices and connect to the last two each time they are turned on.

How do I switch between ANC mode and Transparency mode?

Perform a long press on the right side of the earbuds. This action toggles between Active Noise Cancellation (ANC) and Transparency mode.

Can I customize the touch controls of the Atlanta earbuds?

Yes, via the Urbanista Audio app (available on iOS and Android). You can customize the actions of the left and right long presses.

How do I charge the charging case of the Atlanta earbuds?

Use the included USB Type-C cable and plug it into a power source. The LED indicator blinks orange (0-30%) then white (30-100%) while charging, and stays solid white when the case is fully charged.

What does the voice prompt 'low battery' mean?

This prompt indicates approximately 30 minutes of battery life remaining. The earbuds will automatically turn off after this period. Charge them by placing them in the case.

How do I choose the right size of silicone ear tips?

The earbuds come with multiple sizes of silicone ear tips. Try each size for a comfortable fit and a good seal, which improves sound quality and comfort.

Can I use only one Atlanta earbud at a time?

Yes, the earbuds can be used independently. However, some features like ANC or multipoint may require both earbuds. Refer to the manual for more details.

Where can I find additional help for my Atlanta earbuds?

Visit Urbanista's online help center at https://support.urbanista.com/ to access the FAQ and full user manual.

USER MANUAL Atlanta Urbanista

Black wireless earbuds with Urbanista branding, one partially open and one closed (no visible text beyond brand name)

BATTERY STATUS INDICATOR (1)

ENGLISH (EN)

ESPAÑOL (ES) 07

DEUTSCH (DE) 10

FRANÇAIS (FR) 13

ITALIANO (IT) 16

PORTUGUÊS (PT) 19

SVENSKA (SV) 22

日本語 (JA) 25

简体中文 ^(ZH) 28

URBANISTA ATLANTA

Thank you for choosing an Urbanista product.

POWER ON AND OFF

The earphones automatically power on and off as you open and close the charging case lid. Five minutes of disconnect or 30 minutes of inactivity will automatically power off. If your earphones are automatically powered off outside the charging case, you can press the left and right sides separately for 5 seconds to power them on.

FIRST-TIME PAIRING AND RECONNECTING

Open the charging case lid to initiate first-time pairing. The LED will first indicate the charging case battery level, then start flashing to indicate pairing mode. Go to the Bluetooth settings on your device and select "Urbanista Atlanta" to connect. The LED will stop flashing as the earphones successfully connect. The earphones will automatically try to reconnect to the last connected device(s) every time they are powered on.

MULTIPOINT CONNECTION

Atlanta can be connected with two Bluetooth devices simultaneously through Multipoint Connection. It allows you to seamlessly switch between devices, such as a computer and phone, without having to disconnect first.

Pair and connect to a second device

• Open the charging case lid to activate pairing mode
• The earphones will connect to your first device but remain in pairing mode
• Go to the Bluetooth settings on your second device and select "Urbanista Atlanta" to pair and connect
  • The earphones are now connected to both devices

The earphones can pair with and store up to 8 devices, and will multipoint connect to the last two devices every time it's powered on. Multipoint does not allow audio from two devices to be played at the same time.

TOUCH CONTROLS

Use the double- and triple-tap commands to control music and calls. Left and right side long-press can be customized through the Urbanista Audio app.

- Play/Pause: Double-tap left or right side.

• Previous song: Triple-tap left side.
• Next song: Triple-tap right side.
• Answer/Hang-up: Double-tap left or right side.
• Reject a call: Long-press left or right side.
• Activate voice assistant: Long-press left side.

- Toggle between ANC and Transparency: Long-press right side

CHARGING AND BATTERY

The earphones will automatically start charging when put back into the charging case. A “low battery” voice prompt will notify you when there are 30 minutes of playtime remaining, after which the earphones will automatically turn off.

Use the included USB Type-C cable connected to a power source to charge the case. The “Battery Status Indicator” (1) will pulse during charging and continuously lit when the case is fully charged.

• 0-30 % - LED pulses amber
• 30-100 % - LED pulses white
• 100 % - LED turns solid white

THE URBANISTA AUDIO APP

The Urbanista Audio app is the perfect companion for your Urbanista Atlanta earphones, available for both iOS and Android. The app allows you to customize features and personalize the way you use and experience your Urbanista products.

SILICONE TIPS

The included silicone tips come in different sizes. Choose a size that comfortably fits your ears and provides an effective seal.

RESET

Should the earphones fail to connect, be unstable or unresponsive, please follow the below steps:

1. Put the earphones back in the charging case and close the lid. Reopen after 10 seconds to pair or reconnect to your device.

Should the problem persist, please follow the below steps for a full reset:

1. Delete "Urbanista Atlanta" from the Bluetooth settings on your device.

2. With the earphones in the charging case, press the reset button (2) for 10 seconds until the LEDs turn solid. The earphones will restart and initiate pairing mode.

3. Follow the instructions in "First Time Pairing and Reconnecting" to reconnect to your earphones.

TROUBLESHOOTING

If you have any additional questions, please visit our online help center where you will find our FAQs and an online version of this manual: https://support.urbanista.com/

URBANISTA ATLANTA