1000W - Blender NUTRIBULLET - Free user manual and instructions

USER MANUAL 1000W NUTRIBULLET

• Close supervision is necessary when any appliance is used by or near children. Keep cord out of reach of children. This appliance is not a toy. Do not allow children to play with it. NEVER LEAVE THE NUTRIBULLET UNATTENDED WHILE IT IS IN USE DO NOT USE OUTDOORS ALWAYS TURN THE NUTRIBULLET

• Always use extreme care and attention when using hot ingredients in any blending product, as the friction from the rotating blades (during the blending process) combined with the thermal energy of the heated ingredients can create a dangerous situation if not properly controlled. Important safeguards. Warning! To avoid the risk of serious injury, carefully read all instructions before operating your NutriBullet . When using any electrical appliance, basic safety precautions should always be observed, including the following important information. Save these instructions!

CUPS: To avoid personal injury, never blend hot ingredients or liquid in any sealed NutriBullet

cup! Heated ingredients can pressurize sealed containers when agitated and cause cup and blade separation or violently expel hot contents upon opening. Always start the blending process with room temperature or refrigerated ingredients and liquids (21°C/70°F or cooler). Never continuously operate for longer than necessary to create your recipe — generally less than one minute. Blade friction from prolonged operation can heat ingredients and generate internal pressure in the sealed container. This pressure can cause the cup and blade to separate or blended contents to erupt WARNING!54 from the container, resulting in possible personal injury and/or property damage. If the sealed NutriBullet

cups are warm to the touch, power o your machine and allow the vessel to cool for fifteen minutes or more. Allow contents to settle before slowly releasing the cup from the motor base. With the NutriBullet

cup, pointed away from your face and body, slowly unscrew the easy-twist extractor blade to gently release any residual pressure. If you need to blend for longer than one minute, blend for 1-minute intervals. After each 1-minute interval, allow the motor base to shut o completely and wait at least one minute before starting the next cycle. Do not run for more than 3 consecutive 1-minute intervals to prevent the contents from overheating. Allow contents to settle for 2-3 minutes after the third blending cycle to prevent overheating and buildup of pressure. Sugar in fruits and vegetables can ferment over time, releasing gases that cause pressure to build up in a sealed NutriBullet

cup. Do not store any smoothies or blended mixtures in vessels sealed with the easy-twist extractor blade. If you will not consume your smoothie immediately, remove the easy-twist extractor blade and cover your NutriBullet

cup with plastic wrap before refrigerating. If your smoothie or blended mixture was made in the pitcher, transfer to another storage container before refrigerating. Never store any blended mixture in a sealed cup unrefrigerated, or for any prolonged period of time; contents will spoil and ferment, producing gases that might cause eruption. Never blend carbonated liquids, reactive, or eervescing ingredients (e.g., baking soda, baking powder, vinegar, cirtric acid, yeast, etc.). Pressure from released gases can cause a sealed blending container to burst or separate, resulting in possible injury and/or property damage. BLENDING WITH THE PITCHER: Use extra caution when blending hot liquids in the pitcher. Never turn the power on while using the pitcher without the vented lid cap inserted and locked into the pitcher lid, as ingredients can splash, and if hot or warm, could potentially WARNING! WARNING! cause thermal injury and/or property damage. Steam and splattering ingredients can escape through the pitcher lid, potentially scalding and/ or burning the user. NEVER blend hot liquids in your pitcher without the pitcher lid and vented lid cap locked into the pitcher lid and attached. The vented lid cap allows steam and pressure to escape, while guarding against excess splashing. NEVER blend hot liquids in your NutriBullet

cups or any other sealed vessel. When blending hot liquids, add liquid and solid ingredients to your pitcher below their respective MAX lines. Attach the pitcher lid with the vented lid cap inserted and locked. Press POWER and begin blending on the LOW setting. Once ingredients are integrated, increase speed as needed. If the NutriBullet

blends for longer than one minute, friction from the blades can cause ingredients to heat and generate internal pressure inside the vessel. If a blending vessel becomes warm to the touch, turn o the machine and allow the vessel to cool completely before carefully opening, pointed away from your body to avoid injury. BLADE SAFETY Never store any easy-twist extractor blade in the motor base unattached to a NutriBullet

cup. An exposed blade can present a laceration hazard. Blades are sharp! Handle carefully. Use care when handling any blade. To avoid laceration injury, do not handle or touch any blade edge.

MOVING PARTS! Keep hands and utensils out of and away from blades while blending food to reduce the risk of severe personal injury.

PROPERTY DAMAGE, make sure the easy-twist extractor blade is securely twisted (hand-tightened) onto the NutriBullet

blending vessel before placing it on the motor base and operating the NutriBullet

Select. Check to make sure the easy-twist extractor blade is aligned properly before placing it on the motor base and operating your NutriBullet

• After blending, turn the power blending vessel/easy-twist extractor blade assembly from the motor base until the motor comes to a full stop and the unit powers WARNING! WARNING!76 down completely. Taking the blending vessel o the unit prior to complete power down can cause damage to the easy-twist extractor blade coupling or motor gear. Never use the NutriBullet

Select without adding liquid, as doing so may damage the blades.

Select requires the use of liquids to make smoothies and other nutritious items. The NutriBullet

Select is not intended to be used without liquids, or as an ice crusher. ALWAYS ADD LIQUID to your recipe.

• DO NOT USE the easy-twist extractor blade for grinding dry ingredients such as grains, cereal, or coee, as this may damage the motor and/or the easy-twist extractor blade.

• We recommend replacing your easy-twist extractor blade every 6 months (depending on use) or as needed for optimal performance. PITCHER SAFETY Ensure the easy-twist extractor blade is securely fastened to the pitcher base before blending. Failure to properly align the blade and pitcher attachment can cause liquid to leak out of the base, potentially causing the components to separate during blending. This can result in damage to the machine, damage to property, and/or personal injury.

• With recipes that require certain ingredients to be incorporated during blending, first add the base ingredients, seal the pitcher lid with vented lid cap attached, and begin blending. Then, once the ingredients are well mixed, twist open the vented lid cap and carefully pour or drop ingredients into the mixture.

• If you need to push ingredients closer to the blade, ONLY

USE THE TAMPER PROVIDED

with the NutriBullet

Select. DO NOT use any utensil or apparatus other than the tamper to push ingredients toward the blade. The tamper is specifically designed not to come in contact with the blade. Spatulas, spoons and other tools can make contact with the blade, which may result in damage to the machine, damage to property, and/or possible injury.

• NEVER USE YOUR FINGERS

OR ANY PART OF YOUR HAND

DOWN TOWARD THE BLADE. Only use the provided tamper. Remember to use extra caution when blending hot liquids or ingredients in the pitcher.

• Spray or escaping steam may cause burns and/or property damage.

• Do not fill container above the maximum capacity lines indicated for liquids and solid ingredients.

• Always begin blending hot ingredients on the LOW setting.

• Keep hands and other exposed skin away from lid opening to prevent possible burns. ELECTRICAL SAFETY Do not use this product in locations with dierent electrical specifications or plug types. Do not operate with any type of plug adapter or voltage converter device, as these may cause electrical shorting, fire, electric shock, personal injury, or product damage.

• The use of attachments, including canning jars, is not recommended and may cause fire, electric shock, personal injury, or product damage and will void the product’s warranty.

• To avoid the risk of electric shock, never immerse the cord, plug, or motor base of the NutriBullet

Select in water or other liquids. Discontinue use if the cord, plug, or motor base is damaged.

Select when it is not in use or BEFORE assembling, disassembling, changing accessories, or cleaning. Do not attempt to handle the NutriBullet

Select until all parts have stopped moving.

• Do not allow the cord to hang over the edge of the table or counter. Do not pull, twist, or damage the power cord. Do not allow the cord to touch hot surfaces, including the stove.

• If the motor stops working, unplug the motor base and let it cool for at least 15 minutes before attempting to use it again. Your NutriBullet

Select has an internal thermal breaker that shuts o the motor when it overheats. The thermal breaker will reset when the unit is unplugged, and the thermal breaker cools down suciently. POLARIZED PLUG INFORMATION:

• This appliance has important markings on the plug. The attachment plug or entire cord set is not suitable for replacement. If damaged, the appliance will be replaced.

Select has a polarized plug (one prong is wider than the other) to reduce the risk of electric shock. This plug will correctly fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. WARNING! WARNING! WARNING!98 For your safety, do not modify the plug or motor base in any way. Doing so will increase risk of injury and void the product’s warranty. STOVETOP HEATING SAFETY Do not blend hot ingredients in any sealed NutriBullet

cup! To heat items that have been blended at room temperature or cooler (21°C/70°F or less), transfer mixture to a stovetop pot to heat. Use a thermometer to test the internal temperature of cooked ingredients; they may feel cool to the touch, yet still be hot inside. The NutriBullet

Select is not intended for use on the stove top. Do not place the motor base or any NutriBullet

accessory on the stove or microwave or immerse in boiling water. This may result in damage to the accessory. VENTILATION WARNINGS To prevent a fire hazard, power base openings (underneath the motor base) should be free of dust and lint and never obstructed with flammable materials such as newspapers, tablecloths, napkins, dishtowels, place mats or other similar type materials.

Select on a level surface, leaving unobstructed space beneath and around the motor base to permit proper air circulation. Vents on the bottom of the product are provided for ventilation to ensure reliable motor operation and to prevent overheating. MEDICAL SAFETY

• The information contained in this User Guide or Recipe Guide is not meant to replace the advice of your physician. Always consult your physician regarding health and nutrition concerns. MEDICATION INTERACTIONS:

• If you are taking any medication, especially cholesterol-lowering medication, blood thinners, blood pressure drugs, tranquilizers, or antidepressants, please check with your physician before trying any of the recipes contained in this guide or the recipe guide.

• Avoid blending the following seeds and pits in the NutriBullet

Select, as they contain a chemical known to release cyanide into the body when ingested: apple seeds, cherry pits, plum pits, peach pits, and apricot pits. Fruit pits may also cause damage to the pitcher. WARNING!WARNING! ADDITIONAL INSTRUCTIONS FOR PROPER USAGE

• Do not place any of the NutriBullet

Select parts in a microwave, oven, or in a stovetop pot, or immerse in boiling water, as this may result in damage to the part.

BLENDING VESSELS! The pitcher is marked with two MAX lines: one for solid ingredients (higher line) and one for liquid ingredients (lower line). Your NutriBullet

cups are also marked with a MAX line. When filling the blending vessels, make sure your ingredients do not exceed their respective MAX lines. Exceeding the indicated MAX lines can result in leakage, and may lead to dangerous pressurization.

• Blending vessels and easy- twist extractor blades are specific to the exact model of NutriBullet

Select you possess. Use of incompatible parts (parts from other models) may result in damage to your NutriBullet

Select or create safety hazards. When ordering replacement parts (NutriBullet

cups, pitcher, easy-twist extractor blades) on nutribullet.com or via customer service, please specify the machine model to ensure you receive parts that are compatible with your unit.

Select components for damage or wear that may impair proper function or present an electrical hazard. Make sure that the power cord and plug are undamaged. Discontinue use and replace blending vessels if you detect cracking, cloudiness, or damage to the plastic. Ensure that the blades rotate freely and that the structure is undamaged. Make sure that the motor base is unobstructed and clean. Follow maintenance recommended in the User Guide and never operate your NutriBullet

Select with damaged components. If your NutriBullet

Select malfunctions in any way, immediately discontinue use and contact customer service at 1-800-523-5993. You may purchase new NutriBullet

cups, pitchers, and easy- twist extractor blades at nutribullet.com or by contacting customer service. Save these instructions! If you have any comments, questions, or concerns, please go to nutribullet.com. Or call customer service at: 1-800-523-5993. !1110 Contents. 12 What’s included 13 Assembly guide 14 Getting started 14 Safety guide 15 Pitcher assembly & use 18 NutriBullet

cup assembly & use 20 Blending control panel. 21 How to use the blending control panel 22 Care & maintenance. 22 How to clean the NutriBullet

Select one-year limited warranty 28 Warranty Registration Thank you for purchasing the NutriBullet

Select.1312 What’s included. Assembly guide. 32-oz pitcher tamper pitcher lid with vented lid cap motor base 24-oz handled cup to-go lid easy-twist extractor blade NutriBullet

cup vented lid cap pitcher lid pitcher tamper easy-pour spout blending control panel motor base suction cup feet easy-twist extractor blade15 Use extra caution when blending hot liquids in the pitcher. Steam and splatters can escape through the vented lid, potentially causing scalding and/or burns. NEVER blend hot liquids in your pitcher without the pitcher lid and vented lid cap attached. The vented lid cap is ventilated to allow steam and pressure to release, while guarding against excess splashing. NEVER blend hot liquids in your Nutribullet cups or any other sealed vessel. When blending hot liquids, add liquid and solid ingredients to your pitcher below their respective MAX lines. Attach the pitcher lid with the vented lid cap inserted. Press the POWER icon, then begin blending on the LOW setting. Once ingredients are integrated and the mixture is level (no splashing), increase speed as needed.

• Make sure the base is plugged in for use.

• DO NOT attempt to operate the pitcher on the appliance without attaching the pitcher lid and vented lid cap.

• Never run the appliance while empty.

• Appliance accessories are not intended to be used in the microwave as it may damage the accessories.

cups. Heated ingredients can pressurize sealed containers when agitated and violently expel hot contents upon opening. Always start the blending process with room temperature or refrigerated ingredients and liquids (21°C/70°F or cooler). WARNING! WARNING! Getting started. Pitcher assembly & use. 1 Review all warning and caution statements in the Important Safeguards section (pg 3-9) and on the previous page before proceeding to Step 2. 2 Place the motor base on a clean, dry, level surface such as a counter or table. Place the pitcher onto the motor base and gently twist clockwise so it locks in place. When you hear the click, it’s locked and ready to blend. NOTE: If you are left-handed, place the handle facing towards the center of the blending control panel and twist clockwise. Twist the easy-twist extractor blade onto the base of the pitcher, making sure the components are properly aligned and securely fastened.

Place the pitcher on a clean, dry, level surface such as a counter or table. Add the ingredients to the pitcher, making sure they do not exceed the MAX line. NOTE: The blending pitcher is marked with two MAX lines: one for solid ingredients (higher line) and one for liquids (lower line). When filling the blender, make sure your ingredients do not exceed their respective MAX lines.

Place the pitcher lid with vented lid cap attached on the pitcher, making sure it’s aligned to the handle.

If the ingredients stick to the side of the pitcher, press POWER to stop the appliance and wait for the blade to stop turning. Then remove the pitcher lid and use the tamper to dislodge the ingredients. When finished, replace the lid and continue blending. If the ingredients continue to stick, consider adding more liquid.

Plug the power cord into an electrical outlet and press POWER to turn on the blender.

To start blending, select a speed or the EXTRACT program on the blending control panel. This program will turn o automatically. Buttons illuminate while in use. NOTE: Proceed to the blending control panel chart on page 20 for speed definitions. Twist pitcher counterclockwise and lift o the motor base. Pour and enjoy! Press POWER to turn o the unit completely. When you have reached your desired consistency, pause/stop the appliance by pressing POWER or the speed you selected and wait for the blades to stop turning. The unit will enter idle-mode. The POWER button will remain illuminated.

WARNING: Blades are sharp. Never

insert your hands into the pitcher.

CAUTION: Do not use any apparatus or utensil other than the tamper to push ingredients toward the blade. The tamper is specifically designed not to come in contact with the blade. Spatulas, spoons and other tools are long enough to reach the blade, which may result in damage to the machine, damage to property, and possible injury. NOTE: If you need to add additional ingredients while blending, switch the setting to LOW and remove the vented lid cap from your pitcher lid, leaving the lid attached. Add ingredients through the hole in the top of the lid, followed by the tamper if necessary. Replace the vented lid cap, then increase to your desired speed. DO NOT attempt to add items through the vent hole when blending hot ingredients. If the ingredients stick to the side of the pitcher, press POWER to stop the appliance and wait for the blade to stop turning. Then remove the pitcher lid and use the tamper to dislodge the ingredients. When finished, replace the lid and continue blending. If the ingredients continue to stick, consider adding more liquid.

Plug the power cord into an electrical outlet and press POWER to turn on the blender.

To start blending, select a speed or the EXTRACT program on the blending control panel. This program will turn o automatically. Buttons illuminate while in use. NOTE: Proceed to the blending control panel chart on page 20 for speed definitions. Twist pitcher counterclockwise and lift o the motor base. Pour and enjoy! Press POWER to turn o the unit completely. When you have reached your desired consistency, pause/stop the appliance by pressing POWER or the speed you selected and wait for the blades to stop turning. The unit will enter idle-mode. The POWER button will remain illuminated.

WARNING: Blades are sharp. Never

insert your hands into the pitcher.

CAUTION: Do not use any apparatus or utensil other than the tamper to push ingredients toward the blade. The tamper is specifically designed not to come in contact with the blade. Spatulas, spoons and other tools are long enough to reach the blade, which may result in damage to the machine, damage to property, and possible injury. NOTE: If you need to add additional ingredients while blending, switch the setting to LOW and remove the vented lid cap from your pitcher lid, leaving the lid attached. Add ingredients through the hole in the top of the lid, followed by the tamper if necessary. Replace the vented lid cap, then increase to your desired speed. DO NOT attempt to add items through the vent hole when blending hot ingredients.18 Handle the easy-twist extractor blade assembly with care, as the blades are sharp. Never leave the appliance unattended while in use.

INGREDIENTS, as doing so may cause excessive pressure buildup, resulting in risk of personal injury and or property damage. NutriBullet

cup assembly & use. WARNING! Plug the power cord into an electrical outlet and press POWER to turn on the blender.

Twist the easy-twist extractor blade onto the cup until tightly sealed. 1 Review all warning and caution statements in the Important Safeguards section (pg 3-9) before proceeding to Step 2. 2 Place the motor base on a clean, dry, level surface such as a counter or table.

Turn the cup upside down and place it onto the motor base, gently turning the cup clockwise to lock into the motor base.

To start blending, select a speed or the EXTRACT program on the blending control panel. This program will turn o automatically. Buttons will illuminate while in use. NOTE: Proceed to the blending control panel chart on page 20 for speed definitions. When you have reached your desired consistency, pause/stop the appliance by pressing POWER or the speed you selected and wait for the blades to stop turning. The unit will enter idle-mode. The POWER button will remain illuminated. NOTE: speeds will automatically shut o after 60 seconds. Unlock the assembly by gently twisting the cup counterclockwise. You will hear a click. Enjoy! NOTE: Blending should not require longer than one minute to yield smooth and creamy results. Press POWER to turn o the unit completely.

CAUTION Do not remove the easy-twist extractor blade from the NutriBullet cup until blending has completely ceased. Do not use the easy-twist extractor blade as a storage lid for your cup. Some foods may contain active ingredients or release gases that will expand if left in a sealed container, resulting in excessive pressure buildup that can pose a risk of injury. When storing contents in the cup, use plastic wrap or foil to seal your container. Always point contents away from your body when unsealing. Handle the easy-twist extractor blade assembly with care, as the blades are sharp. Never leave the appliance unattended while in use.

INGREDIENTS, as doing so may cause excessive pressure buildup, resulting in risk of personal injury and or property damage. NutriBullet

cup assembly & use. WARNING! Plug the power cord into an electrical outlet and press POWER to turn on the blender.

Twist the easy-twist extractor blade onto the cup until tightly sealed. 1 Review all warning and caution statements in the Important Safeguards section (pg 3-9) before proceeding to Step 2. 2 Place the motor base on a clean, dry, level surface such as a counter or table.

Turn the cup upside down and place it onto the motor base, gently turning the cup clockwise to lock into the motor base.

To start blending, select a speed or the EXTRACT program on the blending control panel. This program will turn o automatically. Buttons will illuminate while in use. NOTE: Proceed to the blending control panel chart on page 20 for speed definitions. When you have reached your desired consistency, pause/stop the appliance by pressing POWER or the speed you selected and wait for the blades to stop turning. The unit will enter idle-mode. The POWER button will remain illuminated. NOTE: speeds will automatically shut o after 60 seconds. Unlock the assembly by gently twisting the cup counterclockwise. You will hear a click. Enjoy! NOTE: Blending should not require longer than one minute to yield smooth and creamy results. Press POWER to turn o the unit completely.

cup until blending has completely ceased. Do not use the easy-twist extractor blade as a storage lid for your cup. Some foods may contain active ingredients or release gases that will expand if left in a sealed container, resulting in excessive pressure buildup that can pose a risk of injury. When storing contents in the cup, use plastic wrap or foil to seal your container. Always point contents away from your body when unsealing.

The power button actuates the master power of the appliance. When pressed, this button lights up to indicate the motor is powered on, and the other functions can be used. Always turn the master power o and unplug the unit when the machine is not in use. EXTRACTPULSE HIGHLOW EXTRACTPULSEHIGHLOW EXTRACTPULSE HIGHLOW EXTRACTPULSE HIGHLOW EXTRACTPULSE HIGHLOW

CUP Doing so may cause excessive pressure buildup, resulting in risk of personal injury or property damage. Hot items should only be blended in the pitcher using proper safeguards. PULSE Use to control chopping and processing.

WARNING: DO NOT use this

setting with hot ingredients! How to use the blending control panel.

Select a speed and press once to turn on. The button will illuminate. To pause/stop the unit, press the button a second time — it will de-illuminate — or press POWER . While in the idle-mode, the POWER button will remain lit. To fully power down after pausing, press POWER and unplug the unit. NOTE: If using the pitcher, speeds will run until paused/stopped. If using the NutriBullet

cups, speeds will automatically shut o after 60 seconds.

Select will do the work for you. This program automatically stops at the end of its cycle. To pause or stop the blender, press EXTRACT again or POWER . PULSE Press and release the PULSE button to chop ingredients. If you hold this button down, it will continue to run until you release it. EXTRACTPULSE HIGHLOW EXTRACTPULSE HIGHLOW EXTRACTPULSE HIGHLOW EXTRACTPULSE HIGHLOW EXTRACTPULSEHIGHLOW2322 Care & maintenance. MOTOR BASE:

• To avoid risk of injury, NEVER attempt to clean the actuator system on the motor base while the NutriBullet

Select is plugged in.

• Do not attempt to remove any pieces from the motor base.

• Use a sponge or dish cloth dampened with warm soapy water to wipe down the motor base until clean.

• If necessary, you may use a small brush to scrub the actuator system area to ensure it’s clean.

• To clean leakage residue from the motor base, wipe with a damp sponge and warm water.

• If necessary, you may use a small brush to scrub the actuator system area to ensure it’s clean.

WARNING: Never submerge

the motor base in water. Here’s how to clean the NutriBullet

STEP 1: The most important thing —

ALWAYS POWER OFF THE UNIT

and UNPLUG the motor base from the power outlet when it is not in use. Do not attempt to handle the appliance until all parts have stopped moving! This includes during assembly and disassembly, while changing accessories during cleaning, and any time you leave the machine unattended. STEP 2: Detach the NutriBullet

cup / easy-twist extractor blade or pitcher from the motor base. STEP 3: Clean the individual components (motor base, easy-twist extractor blade, NutriBullet

cups, or pitcher) as recommended in this section. NUTRIBULLET

CUPS & TOGO LIDS: These items are TOP RACK dishwasher-safe. We recommend rinsing and briefly scrubbing them with a dish brush to remove any remaining debris before placing in the dishwasher. NEVER use the sanitize cycle to wash the cups — heat this high can warp the plastic. NUTRIBULLET

• The pitcher is dishwasher- safe. We recommend rinsing and briefly scrubbing it with a dish brush to remove any remaining debris before placing in the dishwasher. NEVER use the sanitize cycle to wash the pitcher — heat this high can warp the plastic.

• If preferred, hand-wash the pitcher with soap and water. Stuck-on ingredients might require extra scrubbing from a dish brush or sponge.

• Regularly check the structure of the pitcher and twisting threads for cracking, crazing, or breakage. If damaged, replace immediately to prevent possible personal injury. EASYTWIST EXTRACTOR BLADE:

• Blades are sharp! Handle the easy-twist extractor blade with care when cleaning! It is best to clean blades immediately after use to reduce buildup of residue. If food particles get stuck, use a small brush or sponge to target and dislodge them.

• Do not remove any components of the easy- twist extractor blade; this can result in permanent damage to the blade, resulting in leakage when blending. If, over time, the easy-twist extractor blade becomes loose or damaged, you may order a new easy- twist extractor blade at nutribullet.com or contact customer service.

• Dry the easy-twist extractor blade completely after every use.

• Regularly check the condition of the bottom of the blade for cracking or breakage. If damaged, replace easy-twist extractor blade immediately to prevent possible personal injury. Cleaning the NutriBullet

Select is easy. The pitcher is dishwasher- safe while the cups and to-go lids are TOP RACK dishwasher-safe. The easy-twist extractor blade and motor base can be quickly hand- washed with soap and water. Read on for best practices.2524

ALIGN WITH THE BLADE. Doing so may cause the pitcher and motor base to separate, exposing the blade assembly and potentially causing severe personal injury. TAMPER

• Always hand-wash the tamper with soap and water. Stuck-on ingredients might require extra scrubbing from a dish brush or sponge. STUBBORN CLEAN UP: If ingredients get stuck to the NutriBullet

cups, easy-twist extractor blades, or pitcher, here’s an easy cleanup solution: fill the vessel with room temperature (21°C/70°F or less) water to its MAX line and add 1-2 drops of dish soap. For cups, Replacement parts. To order additional parts and accessories, please visit our website at nutribullet.com/shop/accessories or feel free to contact customer service: 1.800.523.5993. twist on the easy-twist extractor blade, and blend on the motor base for 20-30 seconds. For the pitcher, attach lid and blend on the motor base for the same amount of time, 20-30 seconds. This should loosen debris enough to scrub away with soap and water. How to store: Store the NutriBullet

Select upright with the pitcher lid secured on top. Do not place anything on top of the pitcher lid. Store remaining pieces in a safe place where they will not be damaged and won’t cause harm.

WARNING: NEVER store the easy-twist extractor blade on the motor base without a NutriBullet

cup or the pitcher attached as the exposed blades pose a serious laceration hazard. NutriBullet

Select one-year limited warranty. LIMITED WARRANTY FOR NUTRIBULLET

NutriBullet's limited warranty obligations are confined to the terms set forth below: NutriBullet, LLC (“NutriBullet”) warrants this NutriBullet

against defects in materials and workmanship for a period of one year from the date of original retail purchase. This limited warranty is valid only in the country in which the product is purchased and comes with the product at no extra charge, however shipping and processing fees will be incurred for returns, replacements and or refunds. If a defect exists, and NutriBullet

is obligated under this limited warranty, at its option NutriBullet

will (1) repair the product at no charge, using new or refurbished replacement parts, (2) exchange the product with a product that is new or that has been manufactured from new or serviceable used parts and is at least functionally equivalent to the original product, or (3) refund the purchase price of the product. A replacement product assumes the remaining warranty of the original product. A repaired product has a one-year warranty from the date of repair. When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes NutriBullet’s property. When a refund is given, your product becomes NutriBullet’s property. OBTAINING WARRANTY SERVICE For limited warranty service, simply call our customer service department at 1-800- 523-5993 or contact us via email from our website at nutribullet.com, simply click the contact us link, fill out and submit the customer contact form and we will be glad to help you. When you contact our customer service department you will be asked for your name, address, telephone number and to provide proof of2726 the original purchase (receipt) containing a description of the product(s), purchase date, and the appropriate NutriBullet

serial number(s). Before you send your product for limited warranty service please make sure to keep a copy of all relevant documents for your files (receipt, etc.). It is always recommended to purchase product insurance and tracking services when sending your product for service. Remember, shipping and processing fees will be incurred and are not covered by the one-year limited warranty. EXCLUSIONS & LIMITATIONS This NutriBullet

One- Year Limited Warranty applies only to NutriBullet

products distributed by or for NutriBullet

that can be identified by the “NutriBullet” trademark, trade name, logo and bar code. NutriBullet

Select One-Year Limited Warranty does not apply to any other products that may appear to be authentic, but were not distributed/sold by NutriBullet, LLC. Normal wear and tear is not covered by this limited warranty. This limited warranty applies to consumer use only, and is void when the product is used in a commercial or institutional setting. This limited warranty extends only to the original consumer purchaser and is not transferable. In addition, proof of purchase must be demonstrated. Repair or replacement of the product (or, if repair or replacement is not feasible, a refund of the purchase price) is the exclusive remedy of the consumer under this limited warranty. NutriBullet, LLC shall not be liable for any incidental or consequential damages for breach of this limited warranty or any implied warranty on this product. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. NutriBullet

is not liable for any damage to products not covered by this warranty (e.g., cups, book, User Guide). This limited warranty does not apply: (a) to damage caused by accident, abuse, misuse, or misapplication; (b) to damage caused by improper maintenance (including unauthorized parts service); (c) to a product or a part that has been modified in any way; (d) if any NutriBullet

serial number or trademark has been removed or defaced; and or (e) if the product has been used with an adapter/converter.

THIS LIMITED WARRANTY

AND THE REMEDIES SET

AND CONDITIONS, WHETHER

ORAL OR WRITTEN, EXPRESS

AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES

CANNOT LAWFULLY DISCLAIM

IMPLIED WARRANTIES UNDER

THIS LIMITED WARRANTY, ALL SUCH WARRANTIES, INCLUDING WARRANTIES

reseller, agent, or employee is authorized to make any modification to this warranty.

RESPONSIBLE FOR DIRECT,

OR CONDITION, OR UNDER

ANY OTHER LEGAL THEORY,

INCLUDING BUT NOT LIMITED

IT WILL BE ABLE TO REPAIR

ANY PRODUCT UNDER THIS

LIMITED WARRANTY. Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages or exclusions or limitations on the duration of implied warranties or conditions, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary by state or province.28 Warranty registration. How to find serial number under the motor base. Please visit nut ribullet.com/ warranty-registration or call

1.800.523.5993 to register your

Select. You will be asked to enter the Serial Number* of your product, along with the purchase date and place of purchase. The registration will enable us to contact you in the unlikely event of product safety notification. By registering your product you acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.1.800.523.5993 | nutribullet.com NutriBullet, LLC | www.nutribullet.com | All rights reserved. NutriBullet and the NutriBullet logo are trademarks of CapBran Holdings, LLC registered in the U.S.A. and worldwide. The 1000 watt rating of this appliance was obtained by using the 32oz cup with Blade Holder Assembly and 100g of beef with tendon at max speed for 15 seconds. Illustrations may dier from the actual product. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice. 191025_NB50200Guide de l’usager.

CAUTION: Do not use any apparatus or utensil other than the tamper to push ingredients toward the blade. The tamper is specifically designed not to come in contact with the blade. Spatulas, spoons and other tools are long enough to reach the blade, which may result in damage to the machine, damage to property, and possible injury. NOTE: If you need to add additional ingredients while blending, switch the setting to LOW and remove the vented lid cap from your pitcher lid, leaving the lid attached. Add ingredients through the hole in the top of the lid, followed by the tamper if necessary. Replace the vented lid cap, then increase to your desired speed. DO NOT attempt to add items through the vent hole when blending hot ingredients.

IMPLICITES SANS EXCEPTION,

LIMITATION, LES GARANTIES

LA GARANTIE OU CONDITION,