U4600033A1GB - Interface Tripp Lite - Free user manual and instructions

USER MANUAL U4600033A1GB Tripp Lite

• Combines a USB 3.2 Gigabit Ethernet adapter with 3-port hub
  Supports data transfer rates up to 5 Gbps
• Backward compatible with previous USB generations
• All 3 USB ports support USB Battery Charging (BC) speci cation v1.2
• Gigabit Ethernet port supports true 10/100/1000 Mbps network speeds
• IEEE 802.3az (Energy E cient Ethernet) compliant
  Supports IPv4 and IPv6 pack Checksum Ooad Engine (COE) to reduce CPU loading
  Supports full-duplex and half-duplex operations
• Supports Wake-on-LAN, Jumbo Frames and VLAN tagging
• Plug and play—no software or drivers required

Package Contents

• U460-003-3A1G (White) or U460-003-3A1GB (Black)
• Quick Start Guide

Optional Accessories

N201-Series Cat6 Gigabit Snagless Patch Cables
U322-Series USB 3.0 SuperSpeed A/B Device Cables
- U326-Series USB 3.0 SuperSpeed A/Micro-B Device Cables

Installation

1. Connect the USB Type-CTM (USB-CTM) plug to the USB-C port on your tablet, Ultrabook or computer. Upon connection, the white LED on the unit will illuminate to indicate the unit is connected and receiving power.
2. Connect the RJ45 port to a network using a UTP cable (such as N201-Series Cat6 cables).
3. Connect USB devices to the available ports using USB cables.

USB Type- C^TM and USB- C^TM are trademarks of USB Implementers Forum.

Warranty

3-Year Limited Warranty

We warrant our products to be free from defects in materials and workmanship for a period of three (3) years from the date of initial purchase. Our obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. Visit Triplite.Eaton.com/support/product-returns before sending any equipment back for repair. This warranty does not apply to equipment which has been damaged by accident, negligence or misapplication or has been altered or modified in any way.
EXCEPT AS PROVIDED HEREIN, WE MAKE NO WARRANTYES, EXPRESS OR IMPLIED, INCLUDING WARRANTYES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser. EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL WE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, we are not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.

Warranty

FCC Notice, Class B

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications to this equipment not expressly approved by Eaton could void the user's authority to operate this equipment.

WEEE Compliance Information for Customers and Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and electronic equipment from Eaton, they are entitled to:

• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)
• Send the new equipment back for recycling when this ultimately becomes waste

Regulatory Compliance Identification Numbers

For the purpose of regulatory compliance certifications and identification, your product has been assigned a unique series number. The series number can be found on the product nameplate label, along with all required approval markings and information. When requesting compliance information for this product, always refer to the series number. The series number should not be confused with the marketing name or model number of the product.

Eaton has a policy of continuous improvement. Specifications are subject to change without notice.

Powersing Business Worldwide

Eaton

1000 Eaton Boulevard

Cleveland, OH 44122

United States

Eaton.com

© 2023 Eaton

All Rights Reserved

Publication No. 23-06-131 /

93-3743_revC

June 2023

Eaton is a registered trademark.

All trademarks are property of their respective owners.

Gigabit USB 3.2

Modelos: U460-003-3A1G U460-003-3A1GB

English 1
Français 9
Deutsch 13
Italiano 17

Publication No. 23-06-131 /

93-3743_RevC

Junio de 2023

Powering Business Worldwide

Powering Business Worldwide

Eaton

1000 Eaton Boulevard

Cleveland, OH 44122

United States

Eaton.com

© 2023 Eaton