Leifheit Aquanta Click - Vacuum Cleaner

Aquanta Click - Vacuum Cleaner Leifheit - Free user manual and instructions

Find the device manual for free Aquanta Click Leifheit in PDF.

English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
📄

Document temporarily unavailable

The manual is currently being transferred to our new server. It will be accessible again in a few hours. Thank you for your patience.

Pick your language and provide your email: we'll send you a specifically translated version.
Product type Window vacuum cleaner
Brand Leifheit
Model Aquanta Click
Tank capacity 100 ml
Power supply Rechargeable lithium-ion battery
Charger Mains charger included
Intended use Smooth and wet surfaces (windows, mirrors, tiles)
Recommended usage angle Approximately 45° to the surface
Maximum liquid volume 100 ml
Safety Do not use partially assembled
Cleaning With a damp cloth, do not immerse
Maintenance Check and replace the rubber lip if necessary
Spare parts Replaceable rubber lip
Repairs Only by an authorized technician
Usage Household use only
Warranty Manufacturer's warranty for household use
Compliance Directive 2014/35/EU

Frequently Asked Questions - Aquanta Click Leifheit

How to use the Leifheit Aquanta Click window vacuum cleaner?
Assemble the device completely, apply a window cleaning product to the surface, then vacuum while holding it at an angle of about 45° to the window. Empty the tank after each use.
What to do if the vacuum leaves marks on the window?
Make sure you hold the device at an angle of about 45° and firmly. Also inspect the rubber lip: if damaged, replace it.
Why does water leak from the ventilation slots?
The tank has reached its maximum level of 100 ml. Empty it immediately. Also avoid sudden movements when using overhead.
What to do if the red LED flashes?
This indicates a malfunction. Try turning the device off and on up to three times. If the flashing persists, contact the supplier from whom you purchased the device.
Can I use the vacuum on rough surfaces?
No, use on rough surfaces can damage the rubber lip and reduce efficiency. Use only on smooth and wet surfaces like windows.
How to clean and maintain the device?
Clean the device with a damp cloth. Never immerse it in water. Check the rubber lip regularly and replace it if necessary.
Can I use the vacuum without emptying the tank?
No, if the tank exceeds 100 ml, water may leak from the ventilation slots. Empty it regularly during use.
What type of cleaning product to use?
Use conventional window cleaning products, without alcohol or cleaning foams. Leifheit window cleaners are recommended.
Can the device be used to vacuum dust?
No, the vacuum is designed only for wet surfaces. It should not vacuum dust, as this could damage the device.
How to charge the battery of the Aquanta Click?
Use only the supplied charger. Plug it into a mains socket and connect to the device. Charge fully before first use. After charging, remove the charger from the socket and device.

User questions about Aquanta Click Leifheit

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual Aquanta Click - Leifheit and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Aquanta Click by Leifheit.

USER MANUAL Aquanta Click Leifheit

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Leifheit

Model : Aquanta Click

Category : Vacuum Cleaner