SaluSpa 60044 - Pool BESTWAY - Free user manual and instructions
Find the device manual for free SaluSpa 60044 BESTWAY in PDF.
📄
Document temporarily unavailable
The manual is currently being transferred to our new server. It will be accessible again in a few hours. Thank you for your patience.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Inflatable Spa |
| Brand | Bestway |
| Model | SaluSpa 60044 |
| Dimensions (diameter) | 1.8 m (approximate) |
| Height | 65 cm (approximate) |
| Water Capacity | Approximately 800 L (estimated) |
| Empty Weight | 50 kg (estimated) |
| Power Supply | 110-120 V, 60 Hz, 12 A (max) |
| Temperature Range | 20 °C to 40 °C (68 °F to 104 °F) |
| Main Functions | Heating, air massage, filtration, energy saving timer, Freeze Shield™ anti-freeze protection |
| Control Panel | Touch LED with child lock (5 min inactivity) |
| Massage System | Air blower with automatic shut-off after 30 min |
| Filter Type | Filter cartridge (recommended replacement every week) |
| Liner Material | TriTech PVC or standard PVC (depending on version) |
| Protection Rating | Class I (mandatory grounding) |
| Built-in GFCI | Ground fault circuit interrupter, test before each use |
| Maintenance | Regular cartridge cleaning, chemical water treatment (pH 7.4-7.6, free chlorine 2-4 ppm), occasional reinflation |
| Spare Parts | Filter cartridges, adapters, seals, repair patch, air cap |
| Included Accessories | Heating/filtration pump, cover, protective tarp, chemical dispenser, patch |
| Warranty | Manufacturer warranty (does not cover installation-related damage or chemical imbalance) |
Frequently Asked Questions - SaluSpa 60044 BESTWAY
What are the installation requirements for the SaluSpa 60044?
The spa must be installed on a smooth, flat, level surface capable of supporting the total weight (water + users). Avoid uneven floors or carpets. Keep a distance of at least 1.5 m from any metal surface or electrical device. Provide a grounded power outlet.
How to test the GFCI before use?
Plug in the spa, press the Test button on the GFCI: the pump should stop. Then press Reset to restore operation. If the test fails, do not use the spa and contact customer service.
What is the recommended maximum water temperature?
The recommended maximum temperature is 40°C. For young children, pregnant women, or prolonged use, a lower temperature (38°C) is recommended. Never exceed 40°C.
How to maintain water quality in the spa?
Use appropriate chemicals (chlorine or bromine) to maintain a pH between 7.4 and 7.6 and a free chlorine level of 2 to 4 ppm. Clean the filter cartridges daily and replace them every week. Change the water every 3 days if no chemical treatment is used.
What to do in case of error code E03 (water temperature too low)?
Error E03 indicates that the water temperature is below 4°C. The spa is not designed to operate at this temperature. Wait until the water reaches at least 6°C before restarting the pump. If the problem persists, ensure the ambient temperature is above 6°C.
The massage system is not working, what should I do?
The massage system automatically stops after 30 minutes of operation. If the air pump overheats, unplug it and let it cool for 2 hours before reactivating. Also make sure the cover is not attached during massage operation.
How to use the energy saving timer?
Press the timer button, set the heating duration (1 to 999 hours) then the delay before activation (0 to 999 hours). This function activates only once; after use, it must be reprogrammed. See the manual for details.
How to repair a tear or hole in the liner?
For standard PVC liners, use the provided adhesive patch: clean the area, apply the patch and wait 30 seconds before inflating. For TriTech PVC, use the PVC patch and glue (not provided): clean, cut the patch, apply glue, wait 30 seconds, press firmly for 2 minutes and wait 30 minutes before inflating.
Can I use an extension cord with the spa?
No, using an extension cord or multi-outlet adapter is prohibited. Plug the spa directly into a dedicated grounded outlet capable of supporting 12 A. This prevents overheating and electrocution risks.
How to store the spa after use?
Drain the water, clean and completely dry the liner, pump, and hoses. Use the pump to remove air via the deflation valve. Remove used filter cartridges. Store the spa in its original packaging, in a dry place at a temperature above 15°C.
User questions about SaluSpa 60044 BESTWAY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pool in PDF format for free! Find your manual SaluSpa 60044 - BESTWAY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SaluSpa 60044 by BESTWAY.
