SaluSpa 60062 - Pool BESTWAY - Free user manual and instructions
Find the device manual for free SaluSpa 60062 BESTWAY in PDF.
📄
Document temporarily unavailable
The manual is currently being transferred to our new server. It will be accessible again in a few hours. Thank you for your patience.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Inflatable Spa |
| Brand | Bestway |
| Model | SaluSpa 60062 |
| Category | Pool (spa) |
| Liner Material | PVC (or PVC TriTech depending on version) |
| Power Supply | 110-120 V ~ 60 Hz, single phase, 12 A max |
| Heating Element | 11.3 A at 20°C |
| Massage Blower | 6.5 A |
| Adjustable Temperature | 20°C to 40°C (68°F to 104°F) |
| Massage System | Yes, with automatic shut-off after 30 min |
| Filtration System | Yes, filtration pump (0.7 A) |
| Freeze Shield™ Anti-Freeze | Yes, maintains water between 6°C and 10°C if T<6°C |
| Built-in GFCI | Yes, test before each use |
| Energy-Saving Timer | Programmable from 1 to 999 hours |
| Approximate Capacity | 4 persons (estimated) |
| Water Maintenance | Weekly chemical treatment, pH 7.4-7.6, chlorine 2-4 ppm |
| Filter Cartridge | Weekly replacement recommended |
| Repairability | Adhesive patches and PVC provided |
| Included Accessories | Pump/heater, cover, cartridge, chemical dispenser, patches, valve key |
Frequently Asked Questions - SaluSpa 60062 BESTWAY
How to test the GFCI before each use?
Before plugging in the spa, press the Test button on the GFCI (ground fault circuit interrupter) integrated into the plug. The spa should shut off. Then press Reset to reactivate it. If the test fails, do not use the spa and contact customer service.
What is the maximum water temperature?
The maximum temperature is 40°C (104°F). It is recommended not to exceed 38°C for young children, pregnant women, and prolonged use.
How to set the energy-saving timer?
Press the timer button. The LED blinks: set the heating duration (1 to 999 h) with the +/- keys, then confirm. Then set the delay before activation (0 to 999 h). The timer is single-use.
What to do in case of error code E02 on the control panel?
Error E02 means a water flow problem. Check that the drain plugs are removed, the filter cartridge is clean, and the hoses are not kinked. If the problem persists, contact Bestway support.
How to maintain spa water?
Use a test kit to maintain pH between 7.4 and 7.6, alkalinity between 80 and 120 ppm, and free chlorine between 2 and 4 ppm. Change water every 3 days without chemical treatment. Clean the filter cartridge daily.
How to repair a leak on the liner?
For standard PVC, use the provided adhesive patch: clean the area, peel off the patch, press firmly for 30 seconds. For PVC TriTech, use the PVC patch and glue (not included): clean, cut the patch, apply glue, wait 30 seconds, press for 2 minutes.
Can I use the spa in winter?
Yes, if the outdoor temperature is above -10°C. The Freeze Shield™ system maintains water between 6°C and 10°C. Leave the heater on continuously to prevent freezing. For extended absence, drain and store the spa.
How to clean the filter cartridge?
Disconnect the pump, remove the filter kit, take out the cartridge, rinse it with clean water (or replace it weekly). If it is very dirty or discolored, replace it.
Why is the cover important?
The cover reduces heat loss, protects the water from debris, and prevents children access. It must be secured after each use for safety and energy savings.
What if the pump does not heat?
Check the set temperature (at least 20°C), clean the filter cartridge, ensure the spa is covered, and the water level is sufficient. If the thermal cut-off has tripped, unplug the pump, let it cool, then plug back in. If the problem persists, consult the Bestway website.
User questions about SaluSpa 60062 BESTWAY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pool in PDF format for free! Find your manual SaluSpa 60062 - BESTWAY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SaluSpa 60062 by BESTWAY.
