Bosotherm 3000 - Foot bath BOSO - Free user manual and instructions
Find the device manual for free Bosotherm 3000 BOSO in PDF.
| Product Type | Electric Foot Warmer |
| Brand | BOSO |
| Model | Bosotherm 3000 |
| Power Supply | Mains plug (220-240 V) |
| Power | Approx. 60 W |
| Temperature Levels | 3 (Min, Med, Max) |
| Automatic Shut-off | After approximately 90 minutes |
| Rapid Heating | Yes, during the first 10 minutes |
| Outer Material | Textile with removable plush lining |
| Safety System | Overheat detection with irreversible shutdown |
| Recommended Use | Warm human feet |
| Target Audience | Adults, children > 8 years under supervision |
| Package Contents | 1 foot warmer, 1 lining, 1 switch, 1 instruction manual |
| Cleaning the Foot Warmer | Spot clean with damp cloth and mild detergent |
| Cleaning the Lining | Hand wash with mild detergent |
| Washing Instructions | Do not machine wash, do not iron, do not dry clean |
| Storage | In its original packaging, flat, without objects on top |
| Disposal | Do not discard with household waste, follow WEEE directive |
| Electronic Components | Heating switch, do not cover |
Frequently Asked Questions - Bosotherm 3000 BOSO
User questions about Bosotherm 3000 BOSO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Foot bath in PDF format for free! Find your manual Bosotherm 3000 - BOSO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Bosotherm 3000 by BOSO.
USER MANUAL Bosotherm 3000 BOSO
natural_image
Grayscale photo of a knitted boot with dotted pattern and fluffy fur covering (no text or symbols visible)D Fußwärmer
Gebrauchsanweisung ...... 2
GB Foot warmer
Instruction for Use......8
F Chauffe-pieds
Mode d'emploi....13
E Calientapiés
Instrucciones para el uso .... 19
I Scaldapiedi
Istruzioni per l'uso....25
TR Ayak Isitici
Kullanma Talimatı......30
DEUTSCH
Inhalt
- Lieferumfang....3
- Items included in the package .....9
1.1 Description ......9
-
Important instructions Retain for future use ....9
-
Intended use.....10
-
Operation....10
4.1 Safety 10
4.2 Initial use....11
4.3 Switching on....11
4.4 Setting the temperature....11
4.5 Automatic switch-off .....11
4.6 Switching off....11
-
Cleaning and maintenance....11
-
Storage....12
-
Disposal....12
-
What if there are problems? ....12
-
Technical data ....12
Explanation of symbols
![]() | Read the instructions! | ![]() | Do not wash |
![]() | Do not bleach | ||
![]() | Do not tumble dry | ||
![]() | Do not iron | ||
![]() | Do not dry-clean | ||
![]() | Not to be used by very young chil-dren (0 - 3 years). | ![]() | The textiles used for this device meet the strin-gent human ecological requirements of Oeko Tex Standard 100, as verified by Hohenstein Research Institute. |
![]() | WARNING: Warning of risks of injury or health hazards | ||
![]() | CAUTION: Safety information about possible damage to appliance/accessories. | ||
![]() | NOTE: Important information. | ||
1. Items included in the package
1 Foot warmer
1 Fleece lining
1 Controller
1 Instructions for use
1.1 Description
- Mains plug
- Mains cable
- Controller
- Illuminated settings
- Sliding switch for ON/OFF and temperature settings

2. Important instructions Retain for future use

WARNING
- Non-observance of the following notes may result in personal injury or material damage (electric shock, skin burns, fire). The following safety and hazard information is not only intended to protect your health and the health of others, it should also protect the product. For this reason, pay attention to these safety notes and include these instructions when handing over the product to others.
- This foot warmer must not be used by people who are not sensitive to heat or by vulnerable people who may not be able to react to overheating (e.g. diabetics, persons with skin changes related to illness or persons with scarred skin in the area where the pad is to be applied, after taking any pain-relieving medication or alcohol).
- This foot warmer may not be used by very young children (0-3 years old) as they are unable to respond to overheating.
- This foot warmer may not be used by young children (3-8 years old) unless the controller has been set by a parent or responsible adult and the child has been given adequate instructions on how to use the foot warmer safely.
- This foot warmer may be used by children over the age of 8 and by people with reduced physical, sensory or mental skills or a lack of experience or knowledge, provided that they are supervised and have been instructed on how to use the foot warmer safely, and are fully aware of the consequent risks of use.
• Children must not play with the foot warmer. -
Cleaning and user maintenance must not be performed by children unless supervised.
-
This foot warmer is not designed for use in hospitals.
- This foot warmer must not be used to keep animals warm.
- Do not use this foot warmer with shoes.
- Do not insert needles.
- Do not use when folded or bunched up.
- Do not use if wet.
- The electrical and magnetic fields emitted by this foot warmer may interfere with the function of a pacemaker. However, they are still well within the limits: electrical field strength: max. 5000 V/m, magnetic field strength: max. 80 A/m, magnetic flux density: max. 0.1 millitesla.
Please consult your doctor and the manufacturer of your pacemaker before using this foot warmer.
- Do not pull, twist or make sharp bends in the cables.
- Please check this foot warmer frequently for signs of wear and tear or damage.
If any such signs are evident, if the foot warmer has been used incorrectly or if it no longer heats up, it must be checked by the manufacturer before being switched on again.
- If the mains connection cable of the foot warmer is damaged, it must be replaced by the manufacturer, its customer service department or a similarly qualified person to avoid any risk.
- The electronic components in the controller warm up when the foot warmer is in use. For this reason, the controller must never be covered or placed on the foot warmer when it is in use.
- Always observe the notes on operation (section 4), cleaning and maintenance (section 5) and storage (section 6).
- If you should have any questions about using our devices, please contact Customer Services.
3. Intended use

CAUTION
This foot warmer is intended only for heating human feet.
4. Operation
4.1 Safety

CAUTION
the foot warmer is fitted with a SAFETY SYSTEM. This sensor technology provides protection against overheating across the entire surface of the foot warmer with an automatic switch-off in the event of a fault. If the SAFETY SYSTEM has switched off the foot warmer, the temperature settings (4) are no longer illuminated when switched on. Please note that, for safety reasons, the foot warmer can no longer be operated after a fault has occurred and must be sent to the specified service address.
4.2 Initial use
Insert the mains plug into the socket.
4.3 Switching on
To switch the foot warmer on, set the sliding switch for ON/OFF and temperature settings to setting 1, 2 or 3. The temperature settings (4) are illuminated when switched on.
4.4 Setting the temperature
Level 0: OFF
Level 1: minimum heat
Level 2: medium heat
Level 3: maximum heat

NOTE:
The fastest way to warm up the foot warmer is to initially set the highest temperature setting.

NOTE:
This foot warmer has a fast heating function, which allows the foot warmer to warm up faster in the first 10 minutes.


WARNING
If the foot warmer is being used over several hours, we recommend that you set the lowest temperature setting on the controller to avoid overheating the feet, which may lead to burns to the skin.
4.5 Automatic switch-off
This foot warmer is equipped with an automatic switch-off function. This turns off the heat supply approx. 90 minutes after the initial use of the foot warmer. The temperature setting display then starts to flash. So that the foot warmer can be switched back on, the sliding switch for ON/OFF and temperature settings (5) must first be set to setting "0" (OFF). After about 5 seconds it is possible to switch it on again.

4.6 Switching off
To switch the foot warmer off, set the sliding switch for ON/OFF and temperature settings to setting "0" (OFF). The temperature settings are then no longer illuminated.

NOTE:
If the foot warmer is not in use, switch the sliding switch for ON/OFF and temperature settings to setting "0" (OFF) and unplug the mains plug from the socket.
5. Cleaning and maintenance

WARNING
Before cleaning, always remove the mains plug from the socket first. Otherwise there is a risk of electric shock.

CAUTION
- The controller must never come into contact with water or other liquids, as this may cause damage.
To clean the controller, use a dry, lint-free cloth. Do not use any chemical or abrasive cleaning agents. Small marks on the foot warmer can be removed with a damp cloth and, if necessary, with a little liquid detergent for delicate laundry.

CAUTION
- Please note that the foot warmer may not be washed, chemically cleaned, wrung out, tumble dried, put through a mangle or ironed. Failure to do so may damage the foot warmer.
The removable fleece lining can be washed by hand.
Use a delicate laundry detergent and measure it out according to the manufacturer's instructions.

WARNING
- Only use the foot warmer again once the foot warmer and fleece insert have fully dried. Otherwise there is a risk of electric shock.
6. Storage
If you do not plan to use the foot warmer for a long period of time, we recommend that you store it in the original packaging.

CAUTION
Please allow the foot warmer to cool down before storing. Failure to do so may damage the foot warmer. To avoid breaking the foot warmer, do not place any objects on top of it whilst storing.
7. Disposal
For environmental reasons, do not dispose of the device in the household waste at the end of its useful life. Dispose of the unit at a suitable local collection or recycling point. Dispose of the device in accordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If you have any questions, please contact the local authorities responsible for waste disposal.

8. What if there are problems?
| Problem Cause Solution | ||
| The temperature settings are not illuminated while - the mains plug is connected to a working socket - the sliding switch is set to 1, 2 or 3 | The safety system has switched the foot warmer off permanently. | Send the foot warmer for servicing. |
9. Technical data
See the rating label on the foot warmer.










