CFEV10TB - Deep fryer Casselin - Free user manual and instructions

USER MANUAL CFEV10TB Casselin

1.4 Statement of conformity

2.3 Safety instruction

5.2 Installation and use

6. CLEANING AND MAINTENANCE

6.1 Safety instructions

6.2 Daily maintenance

6.3 Safety instruction for maintenance

Please take note of this user’s manual before installing and using your appliance. Keep this operating manual for reference with your appliance: it has been drawn up for your own and other people’s safety and to ensure a perfect use of the appliance. If the appliance is sold or transferred to someone else, ensure that the manual is with it.

Important notes for your safety are especially marked. Always observe these notices to avoid accidents and damage to the appliance or to the user. WARNING Warning concerning health hazards describing possible risks of injury. Caution and concentration are imperative to use this appliance.

DANGER ELECTRIC SHOCK

The appliance runs on electricity, that means there is a general risk of electric shock that can lead to injury or death. IMPORTANT No-compliance with the using instructions can involve a breakdown or the destruction of the appliance. ADVICE To keep your appliance in good working order fellow these operating instructions. ADVICE Read this operating manual completely before installing and working with the appliance. We do no accept any reponsibility for damages due to non observance of these operating instructions. Engineering changes can be brought to the appliance to improve its functional qualities and its development.

This note of instructions for use is protected by the copyright law. All rights reserved, no part of this note may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, without the permission of the author. Non respect of this diposition will lead to a law procedure and damages.

1.4 Statement of conformity

This appliance corresponds to the standards and current directives of European Economic Communmity as detailed in our statement of conformity

The instructions of use have been established taking account of the regulation in force, of the current technical development, our own knowledge and experience. All translations were drawn up with professionalism. However our reponsability cannot be engaged in case of mistranlation. The French text still the reference.2. SAFETY Safety instructions are important notes to avoid accidents and damage on the appliance. You will nd these safety instructions in the individual chapters of this note and they are represented by special symbols. For an optimal protection against the risks and to maintain the e󰀩ciency and safety of the appliance we recommend observing these notices that must be visible on the appliance.

2.1 General information

Safety instructions are dedicated to avoid mistakes, and provide important information for insuring safe installation, use and maintenance of the appliance. Consequently the appliance must be used for the purpose for which it was expressly designed. Any other use is considered to be improper and consequently dangerous. The appliance is conceived according to the current technical rules. It must be used in close buildings, only by one responsible person.

2.2 Appropriated use

Non-compliance with using instructions can lead to serious injuries or damage. We take no responsibility for damages due to violations of the operating instructions. All technical interventions on your appliance must be performed by qualied professionals. IMPORTANT Use this device only for its intended purpose. The manufacturer assumes no liability for possible damages that may have been caused by incorrect use or mishandling of the device. The intended purpose is that described in the using instruction. It answers to rules of security, hygiene, cleaning and maintenance.

2.3 Safety instructions

So far as indications on labor security are concerned, it refers to European Union’s rules currently in force at the time of production of the appliance. For a regular commercial practice of the appliance, the owner is responsible for checking and respecting the o󰀩cial texts regarding labor security and respect new prescriptions. For countries out of UE, laws and rules of the concerned country must be respected as well as the rules for environmental protection IMPORTANT This appliance is not intended to be used by persons (including children) with impaired physical, sensorial or mental abilities and/or insu󰀩cient experience or knowledge, unless they are supervised by a person responsible for their safety or have been instructed in the proper use of the appliance by this person. Forbidden to children Children should be supervised in order to make sure that they don’t play with the appliance. Keep the appliance out of reach of people of these groups. The appliance must be used only inside closed building

Immediately contact your dealer if you have found damage resulting from transport. In case of packaging damaged you can refuse the parcel or accept it but with the mention of the damage on the delivery document. Unpack the appliance with all its accessories. Check the contents for completeness and possible damages. The damages will be considered receivable if a detailed claim is send to the dealer within the intended deadlines.3.2 Packaging Always transport or ship the appliance in its original packaging to avoid damage. Keep the packaging for such an event (removal or back to the supplier for warranty). The standards in force in your country concerning environmental protection must imperatively be respected before destruction of packaging. 3.3. Storage IMPORTANT The appliance must be stored in its packaging of origin closed Storage of the appliance:

• In a dry room without humidity

• Checking of the product in stock from more than two months (general state and all parts of the appliance)

• Cannot be stored outside

• Don’ t let the power supply cord touch hot parts

• Don’t let the power supply cord along a table or a counter

• The appliance must be connected with a single-phase socket in conformity.

• Before any installation check all the electric cables or piping WARNING Operating your appliance can reach very high temperature. To avoid injuries and burns do not use the appliance if it is damaged. Do no use spare parts not provided with your appliance.

DANGER ELECTRIC SHOCK

In the event of bad installation, the appliance can be dangerous and cause injuries. The electrical safety of this appliance is ensured only if it is correctly connected to an e󰀩ciently earthed system in accordance with electrical safety regulations. The appliance must be unpacked entirely before the connection.

5.2 Installation and use

WARNING Installation and maintenance must be only carried out by qualied technician.Never let your appliance operating without supervision. Always operate with dry hands. Operating never move or tilt your appliance. OPERATING INSTRUCTIONS Remove all protective foils and packaging material prior to usage. Place the appliance on a at, solid, and heat-resistant surface, on its vertical position. Never install your appliance on inammable surface. Do not install the appliance near open replaces or all hot sources. Clean carefully the appliance and accessories. Don’t use abrasive products. Connect the appliance directly to a wall plug socket. The use of adaptors, multiple sockets and/or extensions is not recommended. To properly service the fryer and to secure it 10 cm of clearance is needed on all sides of the fryer. Before pouring oil in the tank check there is no water in it. Fill the tank with the required volume of oil. Maximum and minimum oil level markers. These levels must be respected. We recommend using a good quality oil to preserve your appliance. Vegetal oil contents less saturated grease. (If solid grease is used, always pre-melt it before adding it to the fry pot. Electric connexion: installation of this unit should be performed only by a qualied service technician and in accordance with the actual text regarding accident prevention. All wiring connections for this appliance must be made in accordance with the wiring diagrams furnished on the appliance. To avoid electrical shock, this fryer must be adequately and safely grounded (earthed). If the appliance is wired directly into the electrical power supply a mean for disconnection from the supply giving a contact separation of at least 3mm in all poles must be incorporated in the xed wiring. This appliance must be positioned so that the plug is accessible unless other means for disconnection from the power supply is provided. Oil must be changed regularly. Once cooling down, discard used frying oil, use appropriate container in order to be recycled following the rule for the protection of the public health and the environment, store in a tank in order to be recycled. Before pouring oil check the appliance is o󰀨. Once lled with oil to the proper level, you can move the power switch to the on position. Then the green indicator light in green. Adjust the thermostat on the chosen temperature. The green light turns o󰀨 when the chosen temperature is reached. Once your product is fried, lift the basket from oil, shake it to remove exceed oil. Never close the lid when oil is hot, wait for it cool down. ADVICE Your appliance is provided with an overheating protection. When this protection has been activated you must let your appliance cool down. If overheating protection is stated regularly, contact your dealer or our after-sales service. To reset the appliance, press the reset button located on the back side of the appliance.

6. CLEANING AND MAINTENANCE

6.1 Safety instructions

Before servicing (clean, maintenance, repair) unplug the appliance Caustic detergents, sodium bicarbonate are forbidden for the cleaning of your appliance. Check regularly the power cord. Never dip your appliance in liquid. WARNING Not direct washing via water jets. (Neither jet under pressure)6.2 Daily cleaning Before servicing (clean, maintenance, repair) unplug the appliance Caustic detergents, sodium bicarbonate are forbidden for the cleaning of your appliance. Check regularly the power cord. Hot cooking oil causes severe burns, personal injury and re and/or property damage. Never attempt to move a fryer containing hot oil or to transfer hot oil from one container to another. If not xed this appliance can cause severe injuries. Your appliance must not be in contact with water when operating; Let it cool down.

6.3 Safety instructions relating to maintenance

Daily check the state of your appliance: do not use it if it is damaged or if the power cord is damaged. If the power cord is damaged it must be replaced by a professional electrician. In case of break down contact your supplier. Any intervention work on your appliance must be performed by a qualied professional.

Your appliance is provided with an overheating protection. When this protection has been activated you must let your appliance cool down. ADVICE If overheating protection has been activated let your appliance cool down. If your appliance does not start check the power cord. The use of adaptors, multiple sockets and/or extensions is not recommended. For any other anomaly contact your supplier. ADVICE Waste Electronic and Electric Equipment To avoid any abuse and dangers and to t the rules of the concerned countries before disposing of the used appliance you must remove main electric cable.7. IF OPERATING ANOMALIES OCCUR.

ANOMALIE CAUSES EXPLICATION

The appliance does not function and the heating indicator is not lighted. >The power cord is unplug. >The fuse of the power supply started or is defective. >The control unit does not function. >The high limit thermostat in on. >High limit thermostat is damaged. >Plug the power cord. >Control the fuses. >Check the position of the control unit. >Press the reset button on the back side of the appliance. >Contact your retailer. The appliance is on but it does not heat. The heating indicator is not lighted. >The high limit thermostat is started. >The heating element is damaged. >The contact with the heating element is damaged. >Contactez votre revendeur. The required temperature is not >The thermostat is damaged. >Contact your retailer. The heating element stopped without reaching the required temperature >The high limit thermostat is started. >Press the reset button. ADVICE These anomalies are indications. If you cannot solve the problem following these instructions, contact your retailer.