IAN 337046 - Light strip Livarno Lux - Free user manual and instructions

Product type	LED light strip
Brand	Livarno Lux
Model	IAN 337046
Length	3 m
Power supply	Mains adapter 220-240 V ~ 50/60 Hz, output 12 V DC
Total power (model 14125106L)	Max 17 W
Total power (model 14125206L)	Max 6 W
Protection rating	IP20 (indoor use only)
Protection class (strip)	III
Protection class (adapter)	II (model 14125206L)
Remote control battery	CR2025 (model 14125106L)
Sensor	Music sensor (14125106L) or twilight sensor/motion detector (14125206L)
Light functions	Fixed colors (red, green, blue, white, orange, yellow, turquoise, lilac), 3/7 color variations, gradients, music programs
Remote control range	Approx. 5 m
Motion detector range	Max 5 m, angle 120°
Can be shortened	Yes, at marked locations, using scissors
Package contents	LED strip, mains adapter, sensor (depending on model), remote control (14125106L), connectors, end caps, brackets, adhesive tape, instruction manual
Warranty	36 months
After-sales service	Toll-free number: 00800/27456637

Frequently Asked Questions - IAN 337046 Livarno Lux

Can I shorten the LED strip?

Yes, you can shorten the LED strip at locations marked with a black line. Use scissors and observe polarity when connecting. Make sure to seal the cut end with the provided end cap or adhesive tape.

How to connect multiple LED strips?

Use the provided connectors to join two strips. Observe polarity (+12 V, blue, red, green for model 14125106L; + and - for 14125206L). Do not electrically connect more than two strips.

Can the LED strip be used outdoors?

No, this LED strip is exclusively designed for indoor use in dry, enclosed rooms (IP20 rating). Do not expose it to moisture or weather.

How to clean the LED strip?

Unplug the mains adapter before cleaning. Use a dry, lint-free cloth. Do not use solvents, gasoline, or similar products.

What to do if the remote control stops working?

Check the battery (type CR2025) and replace if necessary. Ensure no obstacles interfere with the link between remote and receiver (range approx. 5 m). Remove the insulating strip from the battery compartment on first use.

How to activate music mode?

On model 14125106L, use the remote to select a music program (J1 to J4). The strip will react to ambient noise. Make sure the music sensor is properly connected.

The LED strip does not turn on, what should I do?

Check that the mains adapter is plugged in and the power outlet is live. Ensure the remote control is turned on (ON button). For model 14125206L, check that the twilight sensor is activated (darkness required for motion detector).

Can I replace defective LEDs?

No, the LEDs are integrated and cannot be replaced. If the LEDs reach the end of their life, the entire strip must be replaced.

What is the warranty period?

The warranty is 36 months from date of purchase. It covers material and manufacturing defects, but not damage due to misuse or normal wear.

How to dispose of the LED strip and batteries?

Do not dispose of the product or batteries with household waste. Take them to appropriate collection points. Used batteries must be recycled in accordance with Directive 2006/66/EC.

USER MANUAL IAN 337046 Livarno Lux

Assembly, operating and safety instructions

NL BE

SENSORLIGHTBAND3M

Before reading, unfold both pages containing illustrations and familiarise yourself with all functions of the device.

FR BE

GB/IEAssembly,operating and safety instructionsPage 15

List of pictograms used

Introduction

Intended use Page 17

Scope of delivery.

Parts description.. Page 17

Technical data.. Page 17

Safety

Safety instructions.. Page 18

Safety instructions for batteries/rechargeable batteries Page 19

Initial use

Replacing/Inserting batteries.. Page 20

Trimming / connecting the LED tape.. Page 20

Installing the LED strip

Switching the LED strip on/off.. Page 21

Controlling light effects with the remote control. Page 22

Maintenance and cleaning.. Page 22

Disposal

Warranty and service.. Page 23

Warranty. Page 23

Service address.. Page 23

Declaration of conformity. Page 23

Manufacturer.. Page 23

List of pictograms used
i	Please read the operating instructions!		The light bulbs used are not dimmable (14125206L).
	This light is only suitable for indoor use in dry and enclosed spaces.		Danger of explosion!
	Only for 14125106L: This product is an illuminated decoration. Do not use these lights for room lighting or as a night light. This is a special product, as the colour value amounts are beyond the ranges listed in the brackets. Colour value amounts: (x <0.270 or x >0.530); (y <-2.172 x2 or y >-2.3172 x2 + 2.3653 x -0.1595).		Wear safety gloves!
			For your safety
			Short-circuit proof safety transformer
			Separate control unit
max. 120°	Angle of radiation Range	max. 5m
~	Alternating current / voltage Polarity of the power supply
V	Volt Direct current / voltage	---
Hz	Hertz (frequency)		Dispose of the packaging and product in an environmentally-friendly manner!
W	Watt (effective power) Operating life
	Protection class II	ONOFF	Switching cycles
	Protection class III	ta	Ambient temperature
IP20	For indoor use only	tc	Housing temperature at stated point
	Observe the warnings and safety notices!		Warning! Risk of electric shock
	Danger to life and risk of accidents for infants and children!		Keep batteries out of the reach of children!
	Environmental damage through incorrect disposal of the batteries / rechargeable batteries!		The packaging is made from 100% recycled paper.
	Energy-efficient external power supply Class V		LED

3 m Light strip with music sensor 3 m Light strip with motion detection

Introduction

Please be sure to carefully read the complete instructions for use. These instructions are part of the product and contain im

important information on setup and handling. Always follow all safety instructions. Before using this product for the first time verify the correct voltage and that all parts are properly installed. If you have any questions or you are unsure about operating the product, please contact the distributor or service centre. Please keep these instructions in a safe place and pass them on to third parties if necessary.

Intendeduse

This luminaire is only suitable for indoor use, in dry and enclosed rooms. This product is suitable for indoors and out

door use. This device is only intended for use in a private domestic environment, not for commercial use. Any use other than that described above is prohibited and will result in product damage. It is further associated with dangers, e.g. short circuit, fire, electric shock, etc.

This product is intended for normal operation.

Only for 14125106L:

This product is an illuminated decoration. Do not use these lights for room lighting or as a night light. This is a special product,

as the colour value amounts are beyond the ranges listed in the brackets.

Colour value amounts: (x < 0.270 or x > 0.530) (y < 2.172x^2 or y > -2.3172x^2 + 2.3653x - 0.1595) .

Scope of delivery

Check immediately after unpacking that the parts are complete and that the product is in proper condition.

1 LED strip, model 14125106L/14125206L
1 mains adapter
1 music sensor (14125106L)
2 connectors
4 end caps
2 cable holder
1 adhesive strip
2 screws for sensor unit (14125106L)
1 remote control (14125106L)
1 set of instructions for use

- Partsdescription

Supply cable
2 Mains adapter
3 LED strip
Remote control (14125106L)
5 Music sensor (14125106L)
6 Socket
7 Plug
Plug connection
9 End cap
10 Protective film
11 Cable holder
12 Receiver (14125106L)
13 Battery compartment (14125106L)
14 Insulating strip (14125106L)
15 Battery (14125106L)
16 Control (14125206L)
17 Sensor (14125206L)
18 Adhesive strip

Technicaldata

Art.no.:14125106L

Operating voltage: 220-240 V ~ 50/60 Hz

Total capacity: LED/max. 17W

LED strip:

Operating voltage: 12V

Performance (LED strip): 14 W

Protection category: III

Level of protection: IP20

Mains adapter:

Operatingvoltage:220-240V \~50/60Hz

Output current: 1.5 A

Protection category: II

Level of protection: IP20

Battery for remote control:

Type: CR 2025

Art.no.: 14125206L

Operating voltage: 220 -240V\~50/60Hz

Total capacity: LED/max. 6W

LED strip:

Operating voltage: 12V = -

Performance (LED strip): 4.5 W

Protection category: III

Level of protection: IP20

Mains adapter:

Operatingvoltage:220-240V \~50/60Hz

Output current: 0.5 A

Protection category: II

Level of protection: IP20

Safety

Safety instructions

Damage due to failure to comply with these instructions for use will void the warranty! We assume no liability for consequential damages! We assume no liability for property damage or personal injury due to improper handling or failure to comply with the safety instructions!

WARNING! RISK OF FATAL INJURY AND ACCIDENT HAZARD FOR TODDLERS AND

SMALL CHILDREN!

Never leave children unsupervised with the packaging material. The packaging material poses a suffocation hazard. Children frequently underestimate the dangers. Please always keep the product out of the reach of children.

This device may be used by children aged 8 years and up, as well as by persons with reduced physical, sensory or mental capacities, or lacking experience and/or knowledge, so long as they are supervised or instructed in the safe use of the device and understand the associated risks. Do not allow children to play with the product. Cleaning and user maintenance must not be performed by children without supervision.

Avoid the risk of fatal injury from electric shock

WARNING!

Check the LED strip for damage before every use. Never use the LED strip if any damage is detected.
A damaged mains cable poses a risk of fatal injury from electrical shock. In the case of damage, repairs or other problems, please contact the service centre or a qualified electrician. The supply cable of this appliance cannot be replaced. If the cable is damaged, the appliance must be disposed of. The appliance contains no parts which may be serviced by the consumer.
Make sure before use that the available supply voltage corresponds to the required operating voltage of the item (see "Technical data").
Never allow the live power leads and contacts to come into contact with water or other liquids.
- Never open any of the components of the electrical equipment or insert any objects into the same components. This will pose a risk of fatal injury from electric shock.
Do not use the LED strip if it is covered with objects or is inlaid into a surface.
Do not install the lamp on damp or conductive surfaces.
This LED strip must not be connected electronically with other LED strips.
Do not secure with sharp staples or nails.
Always unplug the mains plug from the socket before assembly, disassembly or cleaning.
Never catch hold of the mains plug or the LED strip with wet hands.
Only use the individual parts supplied, otherwise all warranty claims will become invalid.

Do not open or cut the rope light.
Do not connect this rope light to another manufacturer's product.
Interconnection shall be made only by the use of the supplied connectors. Any open ends must be sealed-off before use.
Do not use the rope light when covered or crecessed into a surface.
- Never connect the LED strip to the power supply while it is in the packaging. Lay out the item completely before you connect it to the power supply. Lay out the item completely before you connect it to the power supply.

Model 14125106L

For some people, this can lead to epileptic seizures or disturbances of consciousness if they are exposed to certain flashes or light effects. Immediately visit a doctor if you experience epileptic symptoms.

Prevent fire and injury hazards

This product does not contain any parts that can be serviced by the user. The LEDs cannot be replaced.

If the LEDs cease to function at the end of their operational life, the entire item must be replaced.

The built-in LEDs are not suitable for

for external dimmers and electronic switches (14125206L).

Do not look into the LED from a close distance during operation.
Do not look at the LED with an optical instrument (e.g. magnifier).

Safe working

Install the light so that it is protected from dirt and excessive heating.
Always be attentive! Always pay attention to what you are doing and use common sense. Never use the LED strip if you are having difficulty concentrating or do not feel well.

Before use, familiarise yourself with all the instructions and diagrams in these instructions, as well as with the LED strip itself.
To completely disconnect the LED strip from the power supply, the mains adapter must be removed from the mains socket.

Safety instructions for batteries/rechargeable batteries

KEEP BATTERIES OUT OF THE REACH OF CHILDREN!

Swallowing batteries can cause chemical burns, perforation of soft tissue, and death. Severe burns may occur within 2 hours of swallowing batteries. Seek immediate medical attention.

DANGER TO LIFE!

Keep batteries / rechargeable batteries out of reach of children. If accidentally swallowed seek immediate medical attention.

DANGER OF EXPLOSION!

Never recharge non-rechargeable batteries. Do not short-circuit batteries / rechargeable batteries and / or open them. Overheating, fire or bursting can be the result.
Never throw batteries / rechargeable batteries into fire or water.
Do not exert mechanical loads to batteries / rechargeable batteries.

Risk of leakage of batteries / rechargeable batteries

Avoid extreme environmental conditions and temperatures, which could affect batteries / rechargeable batteries, e.g. radiators / direct sunlight.
If batteries / rechargeable batteries have leaked, avoid contact with skin, eyes and mucous membranes with the chemicals! Flush immediately the affected areas with fresh water and seek medical attention!

WEAR PROTECTIVE GLOVES!

Leaked or damaged batteries / rechargeable batteries can cause burns on contact with the skin. Wear suitable protective gloves at all times if such an event occurs.

In the event of a leakage of batteries / rechargeable batteries, immediately remove them from the product to prevent damage.
Only use the same type of batteries / rechargeable batteries. Do not mix used and new batteries / rechargeable batteries.
Remove batteries / rechargeable batterie product will not be used for a longer period.

Risk of damage of the product

Only use the specified type of battery / rechargeable battery!
Insert batteries / rechargeable batteries according to polarity marks (+) and (-) on the battery / rechargeable battery and the product.
Clean the contacts on the battery / rechargeable battery and in the battery compartment before inserting!
Remove exhausted batteries/rechargeable batteries from the product immediately.

- Initial use

Remove all packaging materials before first use.
Never connect the LED strip to the mains power supply while it is in the packaging and rolled up.

Note: Ensure that a plug socket is located in close proximity to the installation area.

- Replacing/Inserting batteries (14125106L)

Note: Before first use, pull the insulating strip 14 out of the battery compartment 13.
If the range of the remote control reduces, the battery needs to be replaced. To do this, take the battery compartment out of the remote

control 4. Remove the old battery 15 and insert a new one.

Note: The correct polarity is indicated on the reverse side of the remote control.

Slide the battery compartment 13 back into the remote control 4.

- Trimming/connecting the LED tape

The LED tape may be trimmed to size or connected.

WARNING! DANGER TO LIFE BY ELECTRIC SHOCK!

Disconnect the lights from the power supply before performing any work on the LED strip 3. Unplug the mains adapter 2 from the socket to do so.

Choose the desired LED strip length.
NoteEnsure that you cut the LED strip at the right place. The cutting point lies exactly between the plus and minus pole and is marked with a black line (14125106L: + 12 V, blue, red, green -; 14125206L: +, -) (see Fig. C).
Shorten the LED strip 3 using a pair of scissors.
Then press both ends of the LED strip 3 onto the displacement contact of the plug connection 8 (see Fig. C).

Ensure the correct polarity of the connector when connecting the LED strip 3 (14125106L: +12 V, blue, red, green <> +12 V, blue, red, green; 14125206L: +, -<> +, -) (see Fig. C).

Then press one end cap 9 at a time onto the ends of the plug connection 8 (see Fig. C).
Check the correct positioning.
Be sure to cover the open end of the LED tape 3 with the adhesive strip 18 if you do not wish to connect the end after trimming the tape (see below Fig. 1-4).

- Installing the LED strip

Note: Ensure that the installation area is clean, grease-free and dry. Otherwise the functionality of the adhesive strip may be impaired.

Note: Ensure that a plug socket is located in close proximity to the installation area.

Note: Light incidence affects the sensor unit [17] (14125206L).

14125106L (see Fig. A):

Connect the mains cable 1 with the music sensor 5 by inserting the plug 7 directly into the socket 6 on the music sensor 5, if it has not been pre-installed. Then connect the music sensor 5 to the LED strip 3.

Ensure the correct polarity of the connector when connecting the LED strip 3 (see below, < + 12V, blue, red, green).

14125206L (see Fig. A):

Using the plug 7 connect the mains cable 1 directly with the socket 6 on the the sensor 17 and the LED strip 3.
Choose a suitable installation area.

Note (14125206L): Foreign sources of light e.g. street lights interfere with the twilight sensor.

Remove the protective film from the reverse side of the LED strip 3 (see fig. B).
Stick the LED strip 3 with the adhesive strip onto the installation area and press it on firmly (see fig. B).
Remove the protective foil [10] (see Fig. D) from the reverse side of the cable holder [11].
Stick the cable holder onto the desired position (see Fig. D).

Remove the protective film from the reverse side of the music sensor 5/sensor 17.
Stick the sensor [17] (14125206L)/the music sensor [5] (14125106L) onto the desired location.
Screw down the music sensor 5 using the screws (14125106L).
Insert the mains cable 1 into the cable holder 11 (see fig. D).
Insert the mains adapter 2 into the plug socket.

Your light is now ready to use.

- Switching the LED strip on / off

14125106L:

Press the ON button on the remote control 4, to switch on the LED strip 3. Press the OFF button on the remote control 4, to switch off the LED strip 3.

Note: The OFF button on the remote control 4 is only suitable to temporarily switch off the LED strip 3. Unplug the mains adapter 2 from the socket to switch off the LED strip 3 permanently.

14125206L (see Fig. E):

The LED strip has a daylight sensor / movement sensor [17]. The motion sensor has a maximum range of max. 5 m.
During darkness, the LED strip will automatically turn on when it detects movement in the detection zone. The light turns on for approx. 30 seconds to 10 minutes. The lighting period can be continuously adjusted using the controller [16].

Installing the LED strip / Maintenance and cleaning / Disposal

- Controlling light effects with the remote control (14125106L)

Note: The transmitter for the remote control 4 is located on the opposite end of the battery compartment 13.

Ensure there are no obstacles between the remote control 4 and the receiver 12.

The range of the remote control 4 is approx. 5m

Choose from the following functions:

: Increase brightness / increase speed of colour changes / increase music sensor sensitivity
Decrease brightness / decrease speed of colour changes / decrease music sensor sensitivity
ON: Switch on LED strip
: Switch off LED strip
RED: set red light
GREEN: set green light
BLUE: set blue light
WHITE: set white light
ORANGE: set orange light
yellow: set yellow light
: set turquoise light
NukH: set purple light
JMP3: colour change (3 colours)
JMP: colour change (7 colours)
:flowing colour change (3 colours)
:flowing colour change (7 colours)

Music programme 1 = slow, flowing colour change with sound induced light reflex
Music programme 2 = flowing colour change with sound induced light reflex
Music programme 3 = colour changes only with sound
Music programme 4 = LED strip will only activate when there's sound.

- Maintenance and cleaning

WARNING! DANGER TO LIFE BY ELECTRIC SHOCK!

Disconnect the lights from the power supply before performing any work on the LED strip 3. Unplug the mains adapter 2 from the socket to do so.

Do not use solvents, benzene or similar substances. They could damage the light.
Use a dry, lint-free cloth to clean the LED strip 3.

Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.

Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with following meaning: 1-7: plastics / 20-22: paper and fibreboard / 80-98: composite materials.

The product and packaging materials are recyclable, dispose of it separately for better waste treatment. The Triman logo is valid in France only.

To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste. Information

on collection points and their opening hours can be obtained from your local authority.

Faulty or used batteries / rechargeable batteries must be recycled in accordance with Directive 2006/66/EC and its amendments. Please return the batteries / rechargeable batteries and/or the product to the available collection points.

Environmental damage through incorrect disposal of the batteries / rechargeable batteries!

Batteries / rechargeable batteries may not be disposed of with the usual domestic waste. They may contain toxic heavy metals and are subject to hazardous waste treatment rules and regulations. The chemical symbols for heavy metals are as follows: Cd = cadmium, Hg = mercury, Pb = lead. That is why you should dispose of used batteries / rechargeable batteries at a local collection point.

Warranty and service

Warranty

You receive a 36 month warranty on this product, valid from the date of purchase. The appliance has been carefully produced under strict quality control. Within the warranty period we shall rectify without charge all material and manufacturing defects. In the event of a defect during the warranty period, please send the appliance to the listed Service Centre address, referencing the following item number: 14125106L/14125206L. Wear parts (such as bulbs) and damage caused by improper handling, non-observance of the operating instructions or unauthorised interference are excluded from the warranty. The performance of services under the warranty does not extend or renew the warranty period.

-Serviceaddress

Free service number:

Tel.: [phone]

IAN 337046_2001

Please have your receipt and the product number (e.g. IAN 123456_7890) available for all queries as proof of purchase.

Declaration of conformity

This product fulfils the requirements of the applicable European and national directives. Conformity has been demonstrated. The relevant declarations and documents are held by the manufacturer.

Manufacturer

NOSTE OCHRANNÉ RUKAVICE!

Vykon (LED pas): 14 W

Trieda ochrany: III

Stupeč ochrany: IP20

Sietovy diel:

Prevádkovénapatie:220-240V 50 / 60Hz

Vystupny prud: 1,5 A

Trieda ochrany: II

Stupeč ochrany: IP20

Bateria pre dial'kové ovladanie:

Typ: CR 2025

C.vyr.: 14125206L

Prevádkové napatie: 220-240 V~50/60Hz

NOSTE OCHRANNÉ RUKAVICE!