MCO4106T1207 - Washing machine CANDY - Free user manual and instructions

Product Type	Front-loading washing machine
Brand	Candy
Model	MCO4106T1207
Washing capacity	6 kg
Spin speed	1200 rpm
Energy class	D
Noise level (wash/spin)	56 dB / 78 dB
Dimensions (W x H x D)	60 cm x 85 cm x 56 cm
Net weight	67 kg
Power supply	220-240 V, 10 A, 50 Hz
Wash programs	Cotton, Synthetics, Delicates, Quick, Wool, Rinse, Spin
Options	Delayed start, Pre-wash, Rinse hold
Display	LED, remaining time
Maintenance and cleaning	Regular cleaning of filter, detergent drawer and door seal
Control panel	Rotary knobs and touch buttons
Spare parts available	Door glass, hinge, door lock, door seal, detergent drawer
Repairability	Disassembly instructions provided for main parts
Safety	Child lock, overflow protection
Power cord length	1.5 m

Frequently Asked Questions - MCO4106T1207 CANDY

How to install the washing machine correctly?

Place the appliance on a flat and rigid surface. Remove the transport screws (4 at the back) and the spacers. Connect the water inlet hose to the tap and the drain hose to the drain. Plug the power cord into a grounded outlet.

How to clean the drain filter?

Open the trapdoor at the bottom right, place a container under the filter, unscrew it carefully, remove any dirt, then screw it back tightly. Do this every 2-3 months.

What to do if the washing machine does not turn on?

Check that the appliance is plugged in and the outlet works. Make sure the door is properly closed. If the problem persists, check the circuit breaker.

How to clean the detergent drawer?

Pull the drawer firmly outward, unclip the front panel, wash all parts with lukewarm water, brush off deposits, dry and reassemble.

What does error code E20 mean?

Error code E20 indicates a drainage problem. Check the filter, the drain hose (kinked or blocked), and the drain pump.

How to change the door seal?

Unclip the outer clamp with a flat screwdriver, remove the old seal, place the new one aligning the notches, tighten the clamps. Refer to the manual for details.

What is the maximum washing capacity?

The capacity is 6 kg for standard programs. Do not exceed this load to ensure efficient washing and avoid damage.

How to use the delayed start?

Select the desired program, press the Delayed Start button, choose the number of hours (1 to 24) using the rotary knob, then press Start.

Why is there water on the floor under the machine?

Check the hose connections, the door seal, and the detergent drawer. Also make sure the filter is tightly closed. If the leak persists, contact a technician.

How to maintain the door hinges and locks?

Clean the hinges regularly with a damp cloth. If the lock is defective, follow the instructions in the manual to remove and replace it using a Torx key.

USER MANUAL MCO4106T1207 CANDY

ENGLISHEN | REPAIR INSTRUCTIONS

SPANISHES INSTRUCCIONES DE REPARACION

FRENCHFR INSTRUCTIONS DE RÉPARATION

CROATIANHR | UPUTE ZA POPRAVAK

CBAAETe BBLHHTE BNTOBEOT NANTATA

9.

CBAANE BIAHTOBETe BBB BTPELUHOCTA HA KOPNYCA C TpBBEN KAIOH C BBPTALL MOMENT 7. CBAANE NANTATA

3AKΛΟΥΑΚΑ HA

BPATATA

HHCTPyKUIN

3AKIOYAAKA HA BPATATA TIN1

HCHTPYMEHTN:OTBEPTKA C KpbCTATA IABA,KAEULI,OTBEPTKA C IAOCKA IABA

1.

OTBOPeT AIOK-BPQATQA

2.

N3noA3BαηTe ΑOCKATA

OTBepTKa 3a

NOBANIQAHE

CBAHHe Ha

BbHLHATACKO6a

3.

Korato cko6ata

e CBAAeHA,

OaAeMaHueTc

yIaBTHHeHNETo,3a

AaCTnHETe A0

BbtpewHOCTHa H

ypexd

4.

KATO N3nOa3BATE

Taeheh KAIOH, CRSANTO

3CKDNEBQUITE

BHTOBEOT

KAIOHAAKATA

HA Bpatata

HATINCHETE

KAeMaTaN.

5.

CBAAeTe

KAOQAKATA HA

Bpatata

6.

OTaeAeTe

CKOBA, B CAYAM

HA KOHEKTOP

TIN TASON

BHHMABnTHe △

He pUs3meHne

PipBnAHTCpH

HOCKOOO

3AKIOUOAAKA HA BPATATA TIN2

HCHTPYMEHTN:OTBEPTKA C KpbCTATA TAABA,KAEU,OTBEPTKA C IAOCKA TAABA

1.

OTbopete AIOK-BPATATA

2.

H3nOa3BaIe

NAOCKATA

OTBEPTKA 3a

NOBANIQAHE

CBAHHeHa

BbHHata CKOO

3.

Korato cko6ata

e CBQAeHA,

ofaeet

M

AGCHHETAO

BbTDEUHOCTTA HO

Vpea

4.

KATO H3NOA3BATE

TaeHekAOH

CBAAeTe

3akpenballe

BINTOBEOT

KAOKDAKATA Ha

Bparada

5.

Pa3rAo6eTe

pa60THata

IAOCKOCTN

O6AHUOBKNTE

6.

Pa3rAo6eTe

O3aTopa

THE3AOTO

7.

CBQAETE

KAIOYQAKATA

HA BPOTATA

8.

CBQAETEBOAHN

npea3nteA

9.

CMEHETE KAKOAGAKATA

Ha BpaTata, KaTO

BHMMCATE 30

MEXAHHHTO

Cbbp3BaHE Ha

ABCpHNOTOOTBOPAHe

In eAektpnuecknTe

Bp3KN

YIΛbTHHTEA HABPATATA

HHCTPyKUIN

YIΛbTHHTEA HA BPATATA

INHCTPYMEHTI: TAEHEH KAIOH, KAEELUN, OTBEPTKA C IAOCKA TAABA, DBA TPbBHN KIAOHA C BbPTTIL MOMEHT 7

1.

OTbopete AIOK-Bpata

2.

N3noA3BaIte
NAOCKATA OTBepTKa
3a NOBAnrAhe
H CBAAHe Ha
BbHHata CKo6a

3.

Korato cko6atae CBAeHa,OTaEaTe MAHweta OYNAbTHHeHnTo,3a DA CTINHETe DO BbTpewHOCTTHa ypeaa

4.

Kato n3n0A3BATE naCKa OTBeptka, CBAaTe CkO6aTa Bbpxy MaHweta

5.

Cbaete yNAbTheHHeNo

6.

IOCTABETEOHOBOTUINBTHENHEKATO BHIMABATE3aPABHANOHOAOXEHHeBAab6HATNHTE

7.

HanbxanTeCKo6ataBbpxyMaHweta

8.

CTerHete
YIaBTHInTeAHata
CKoBa Bbpxy
MAHWeTa C
NOMOuTa Ha
NHCTpyMeHTnte

9.

Hamectete
YnabTHeHneto Bbpxy
Kopnyca.
IOCTaBeTe BbLHaTa
CKoBa n 3aTeHHeTe
(aKe e HeoBxOAnMo,
C NOMoUta Ha
Kaeu)

YEKMEJXE 3A INEPNAEH INPENAPAT

HHCTPyKUIN

YEKMEXKE 3A IEPNAEH IPEIAPAT

1.

OToBopete YekMeJxKeto 3a nepnAen npenapat

2.

C nOMoUta Ha ABETe pbue ro N3abpnaite CnHO

3.

Otkahe
mackata ot
yekmeaKeTo
3a nepnAeH
npenapat, kato
BHIMABATE Da He CuyNTe KYKITE

DVERE

INSTRUKCE

NASTROJE: KLIK TORX 25

DVERE TYP 1

1.

Oteviete dvee

2.

Apaiaipate to TIpooataeutiko vepo

9.

Avikataotnate tv
aopdaiia Tpota
TPOOEXVtac n
unxavkn ouvean Tou
avoivatoc kxtaknc
avaykn KAI TOT
nekptpkov ouvseow

IAPEMBYΣMA ΠOPTAΣ

O△HΓΕΣ

IAPEMBYEMA IOPTA

EPTAAEIA: MHXANIKO KAEIITORX, AABIA, EINIEAO KATABIDI, DYOMHXANIA KAELIAI ΣΩAHNQN APIQ.7

1.

AvoiTe TnV nOpta Tou Tluvtnpiou

2.

Xpoaiotoine to
ETINIE6o katoaibi
WSOxOyia va
apaipeoteTov
Egwtepiko ophiKtnpa

3.

Moic aapiee i
OphiKtnpac,
ATTOU6EOT
TIPuyio anto To
Tapeuuaa oTe va
ETIHTEPETPOBaaon
OTEOwTEPIKO TO
TPoiovtoc

4.

Xpoaioutoioovtac
eTTIESO KATOaβiδI, aapaipeoTe Tov
OphiYKTnpa OTOV
Owlaiva

5.

Apaipote To Tapeuua

6.

ToTOnoTeTne To
Veo TApEμBuαμa,
SivovTaCπPoOaxn
OTc EYKoTtCs
ToTOnoTeTnOng

7.

Eoiayayet
Tov ophiKtnpa
kaiosioons
Otny nEvopa Tou
oWnva

8.

EpiTe Tov XwveUTo
OphiKtnpa
OTov OAnVa
XpoaiouToiWvTaC
Ta epaia

9.

TOnToBEnTo
TnapeuBua oToV
OaAio.
TepeoTe ToV EcotepiKo
OpykTpa Ka Oxpte
TOV (eav xpeiaetai
XpoTouTtoTne Tn
λaβδa)

ΣYPTAPI ANOPPYΠANTIKOY

O△HΓIE∑

By using the 25 Torx wrench, remove the screws that fix the hinge to the cabinet

3.

Pull the porthole from the top and remove it

PORTHOLE TYPE2

TOOLS: 25 TORX WRENCH, FLEXIBLE 7 PIPE WRENCH

1.

Open the porthole

2.

Remove the cover after removed its screw

3.

Remove the screws of the plastic hinge

4.

Pull the porthole from the top and remove it

HINGE

INSTRUCTIONS

HINGE TYPE 1 TOOLS:25TORX WRENCH

1.

Open the porthole

2.

By using the 25 pipe wrench, remove the screws that fix the hinge to the cabinet

3.

Pull the porthole from the top and remove it

4.

Remove all the screws of the porthole

5.

Separate the frame from the counter frame

6.

Replace the hinge, taking care not to lose the bushes

HINGE TYPE2 TOOLS:25 TORX WRENCH, FLEXIBLE 7 PIPE WRENCH

1.

Open the porthole

2.

Remove the cover after removed its screw

3.

Remove the screws of the plastic hinge

4.

Pull the porthole from the top and remove it

5.

Remove the pin

6.

Remove the door clip

7.

Once the strap is removed, detach the flap from the gasket, to allow access to the inside of the product

8.

Remove the external screws from the hinge

9.

Remove the screws inside the cabinet with the 7 pipe wrench. Remove the hinge

DOOR LOCK

INSTRUCTIONS

DOOR LOCK TYPE 1

TOOLS: CROSS-HEADED SCREWDRIVER, TONG, FLAT SCREWDRIVER

1.

Open the porthole

2.

Use the fl at screwdriver for leverage, and remove the external clamp

3.

Once the clamp is removed, detach the flap from the gasket, to allow access to the inside of the product

4.

By using Torx wrench, remove the fi xing screws of the door lock, and press its buckle.

5.

Remove the door lock

6.

Disconnect the wiring, in case of "faston", pay attention to do not invert the wiring

DOOR LOCK TYPE 2

TOOLS: CROSS-HEADED SCREWDRIVER, TONG, FLAT SCREWDRIVER

1.

Open the porthole

2.

Use the fi at screwdriver for leverage, and remove the external clamp

3.

Once the clamp is removed, detach the flap from the gasket, to allow access to the inside of the product

4.

By using Torx wrench, remove the fi xing screws of the door lock

5.

Disassemble the work top and frims

6.

Disassemble the dispenser and bezel

7.

Remove the door lock

8.

Remove the water protection

9.

Replace the door lock by paying attention to mechanical linkage of emergency opening and electrical connections

DOOR'S GASKET

INSTRUCTIONS

DOOR'S GASKET

TOOLS: TORX WRENCH, TONG, FLAT SCREWDRIVER, TWO 7 PIPE WRENCHES

1.

Open the porthole

2.

Use the fl at screwdriver for leverage, and remove the external clamp

3.

Once the clamp is removed, detach the flap from the gasket, to allow access to the inside of the product

4.

By using fl at screwdriver, remove the clamp on the tube

5.

Remove the gasket

6.

Place the new gasket, paying attention to the positioning notches

7.

Insert wiring clamp on the tube side

8.

Tighten the clamp flush on the tube by using the fooling

9.

Fit the gasket on the cabinet. Fix the external clamp and tighten it (if needed with tong)

DETERGENT DRAWER

INSTRUCTIONS

DETERGENT DRAWER

1.

Open the detergent drawer

2.

By using two hands, pull it out firmly

3.

Unhook the mask from the detergent drawer, being careful not to break the hooks

PUERTAFRONTAL

INSTRUCCIONES

Uklonite bravu
vrata

6.

Odspojite oizicenje, a u slucaju "faston" priklujcaka, pazite da ne preokrenete oizicenje

BRAVA VRATA TIP 2

ALATI: KRIZNI ODVIJAC, HVATALJKA, RAVNI ODVIJAC

1.

Otvorite prozor

2.

S pomocu
ravnog odvjaca
napravite
polugu i ukonite
vanjsku kopcu

3.

Nakan sto se
kopca ukloni,
odvojite oblogu
od brve kako
biste omogucili
pristup unutrasnjosti
proizvoda

4.

S pomocu Torx kluca ukonite pričvrsne vijke brave vrata

5.

Rastavite gomji radni dia o obrue

6.

Rastavite dozator i okvir

7.

Uklonite bravu vrata

8.

Uklonite zaftu od vode

9.

Zamijenite bravu
vrata i obratite
pozarnost na
mehanicki spoj
atvora za slucaj
nuzdige elektricne
prikljuce

BRTVA VRATA

UPUTE

BRTVA VRATA

ALATI: TORX KLJUC, HVATALJKA, ODVIJAÇ, DVA CIJEVNA KLJUÇA 7

1.

Otavorite prozor

2.

S pomocu ravnog odvija cnapravite polugu i uklonite vanjsku kopcu

3.

Nakon sto se kopca
ukloni, odvojite
oblogu od brve
kako biste omogucili
pristup unutrasnjosti
proizvoda

4.