IAN 330843 - Garden shed FLORABEST - Free user manual and instructions

USER MANUAL IAN 330843 FLORABEST

Assembly instructions

TONNELLE PLIANTE EN ALUMINIUM

Notice de montage

（D）ATCH

ALUMINIUM-FALTPAVILLON

Aufbauonleitung

OK

HAVEPAVILLON ALUMINIUM

Before reading, fold out the iluustrine page and get to know all of the functions of your cril.

图

Klap akne mert flattumnere og irden el kaww eem og gug the selfpeodr herrig mad ell cie.
pcopertets functori.

（）

Dlpez In paece cne hlinfions gnt in hantat iinmuae uunus ouaii rcae fccnns n the Pergesel

（）

GS/IE/NI Assembly and safety information Page 06

Risk of fatal injury 8

Risk of injury 8-9

Selecting the Location 9

Assembly 9-11

Dismantling 11

Storage 11

Cleaning and Care 11

Disposal 11

Notes on the guarantee and service handling 11-12

FR BE

You have chosen to purchase a high-quality product. Familiarise yourself with the product before using it for the first time.

Read the following assembly instructions and the safety information carefully.

Use the product only as described and only for the given areas of application. Store these assembly instructions carefully. When passing the product on to third parties, please also hand over all accompanying documents.

Please read all the safeties and instructions.

Failure to observe them can lead to serious injury.

Contents

1 x Folding aluminium gazebo
1 x Side wall with window
1 x Side wall without window
4 x Guy line
4 x Tent pegs
4 x V-tent pegs
1 x Storage bag
1 x Assembly instructions

Technical Data

Dimensions: approx.

$$ 3 0 0 \times 2 6 0 \times 3 0 0 \mathrm {c m} (\mathrm {w} \times \mathrm {h} \times \mathrm {d}) $$

Weight: approx. 15kg

Material:

• Sidewall window: PE

• Extending poles: aluminium
  Crossbars: steel, powder-coated

• Side panels: polyester 600D
• Roof: polyester 600D, PA coated
• Ground spikes: steel, galvanized

Date of manufacture (month/year): 01/2020

Intended Use

This article is designed as a privacy and sun screen for outdoor use. It is not intended for permanent use outdoors as it has limited weather resistance. Do not use this article for commercial purposes.

Safety Notices

• The additional assembly of replacement walls to construct an enclosed room is not permitted. No more than 50% of the gazebo may be enclosed!

Risk of fatal injury!

• Never leave children unsupervised with the packaging material. Suffocation hazard.

Risk of injury!

• Do not use this article in adverse weather conditions such as strong winds, rain or snow.

• Dismantling of gazebos at expected wind speeds of more than 40km/h (fresh wind, larger branches and trees move, and the wind is clearly audible).

• Dismantle the article in freshening wind or other adverse weather conditions.

• The corner joints pose a risk of pinching during assembly and dismantling. Please note this collapsible pavilion applies high tension forces to the corner joints, resp. area generated during dismantling when pressing the locking pin.
• Set the article up on level ground.
• Advise persons of the guy lines and the tripping hazard they pose.
• Be sure the article is fully expanded before using it.
  Always use the article with adult supervision, never as a toy.
• Check the article for damage and wear before every use.
• Before every use check all parts were properly installed. Incorrect assembly can compromise the safety and function.
• No open flames, barbeques, or mushroom heaters close to the gazebo. In the event that a gazebo catches fire despite this precaution then leave the gazebo immediately. Extinguish the fire with a fire extinguisher or with water. Notify the fire brigade immediately if necessary.

• In light winds be sure the open sides of the pavilion are on the lee side.

• Do not connect or link multiple pavilions. Individual pavilions must be spaced at least 3m apart.

• Empty any water pockets that might form.

Selecting the Location

• The article has a dimension of 3 × 3m , and further requires space for the guy lines.
  If possible, set the product up in a location protected from wind.
• In light winds be sure the open sides of the pavilion are on the lee side.
• The ground should be level and tent pegs should provide adequate stability.

Assembly

Parts descriptions (Fig. A - I)

1 - Pavilion roof
2 - Corner joint
3 - Tent peg
4 - Base plate
5 - Guy line
6 - Corner tarp
7 - Hook for corner tarp
8 - V-tent pegs
9 - Side wall without window
10 - Extending foot
11 - Side wall with window
12 - Side wall and roof hook and loop fasteners
13 - Loop for guy line
14 - Crossbars
15 - Corner bars / telescoping bars
16 - Roof bars

Note! Product assembly requires at least 2 persons. We recommend assembly with 4 persons.

Step 1

Remove the article from the storage bag.

Step 2

Slowly and evenly extend the article at the opposite corners (Fig. B and C).

Step 3

Slide the corner joints (2) for each corner as far up until the locking pin on the corner poles locks in (Fig. D).

Note! Great resistance indicates the article is not yet extended far enough.

Attention! Pinching hazard at the corner joint!

Step 4

Extend the telescoping feet (10) in the corner poles. To do so, place one foot onto the base plate (4) of the feet and slide the upper part of the corner pole up until you hear the telescoping foot lock in (Fig. E).

Note! You may choose from 3 height settings.

Step 5

Tighten the corner tarps (6) by securing the factory installed hooks (7) in the designated opening on the telescoping foot (Fig. F).

There are 3 openings to choose from:

When the telescoping foot is locked into the lowest position, also secure the hook in the lowest position.

When securing the telescoping foot in the middle or top position, also select the respective middle or top opening.

Step 6

Anchor each telescoping foot using the included tent pegs (3) using the openings in the base plate (Fig. G).

Caution! Verify the tent pegs are firmly secured.

Step 7

Knot one guy line (5) into each loop (13) on the outside corners of the article (Fig. G).

Tauten the lines and secure the ends with the V-tent pegs (8) (Fig. G).

Caution! Again be sure the tent pegs are securely anchored.

Step 8

Secure the side walls (9, 11) to the pavilion corner poles / telescoping poles (15) and crossbars (14) using the factory installed hook and loop fasteners (12) (Fig. H).

Note! When fastening be sure the wrapped seam on the edges of the side walls faces inward.

Step 9

Secure the factory installed hook and loop fasteners to the roof bars (16) (Fig. 1).

Dismantling

Step 1

Remove the side walls.

Step 2

Remove the tent pegs for the guy lines and base plates.

Step 3

Press in the locking pins on the telescoping feet to slide in the feet.

Step 4

Press in the locking pins on the corners joints to slide the corner joints down.

Caution! Pinching hazard!

Step 5

Slowly and carefully push the folding frame together toward the opposite sides.

Step 6

Store the dry and cleaned article in the storage bag.

Storage

When not in use, always store the product clean and dry at room temperature.

Cleaning and Care

Clean the article with a damp cloth and a mild cleaning agent.

Do not use petrol, solvents or harsh cleaners. The pavilion roof may be treated with a waterproofing spray.

Disposal

Dispose of the article and the packaging materials in accordance with current local regulations. Packaging materials such as foil bags are not suitable to be given to children.

Keep the packaging materials out of the reach of children.

Dispose of the products and their packaging in an environmentally friendly manner.

The recycling code is used to identify various materials for recycling. The code consists of recycling symbol - which is meant to reflect the recycling cycle and a number which identifies the material.

Notes on the guarantee and service handling

The product was produced with great care and under constant supervision. You receive a three-year warranty for this product from the date of purchase. Please retain your receipt.

The warranty applies only to material and workmanship and does not apply to misuse or improper handling. Your statutory rights, especially the warranty rights, are not affected by this warranty.

With regard to complaints, please contact the following service hotline or contact us by e-mail. Our service employees will advise as to the subsequent procedure as quickly as possible. We will be personally available to discuss the situation with you.

Any repairs under the warranty, statutory guarantees or through goodwill do not extend the warranty period. This also applies to replaced and repaired parts.

Repairs after the warranty are subject to a charge.

IAN: 330843_1907

GB Service Great Britain

Tel.: [phone]

E-Mail: [e-mail]

IE Service Ireland
NI Tel.: [phone]

0,08 EUR/Min.,

(peak))

0,06 EUR/Min.,

(off peak))

E-Mail: [e-mail]

Hjertelig tillykke!