NT 552 Tact² Me I - Vacuum Cleaner Kärcher - Free user manual and instructions

USER MANUAL NT 552 Tact² Me I Kärcher

• Teile-Nr. Kabellänge EU 6.649-915.0 10 m 12 DE– 1 Please read and comply with these original instructions prior to the initial operation of your appliance and store them for later use or subsequent own- ers. – Before first start-up it is definitely nec- essary to read the safety indications Nr. 5.956-249! – The non-compliance of the operating and safety instructions may lead to damages of the appliance and to dan- gers for the operator and other persons. – In case of transport damage inform ven- dor immediately Notes about the ingredients (REACH) You will find current information about the ingredients at: www.kaercher.com/REACH Danger Immediate danger that can cause severe injury or even death. 몇 Warning Possible hazardous situation that could lead to severe injury or even death. Caution Possible hazardous situation that could lead to mild injury to persons or damage to property. 몇 Warning The appliance is not suitable for vacuuming dust which endangers health. – The machine is meant for dry and wet cleaning of floors and walls. – This appliance is suited for the commer- cial use, e.g. in hotels, schools, hospi- tals, factories, shops, offices, and rental companies. Contents Environmental protection
• EN Symbols in the operating in- structions p. 1
• EN Proper use p. 1
• EN Device elements p. 1
• EN Start up p. 2
• EN Operation p. 2
• EN Transport p. 3
• EN Storage p. 4
• EN Maintenance and care p. 4
• EN Troubleshooting p. 4
• EN Warranty p. 5
• EN p. 6
• Accessories and Spare Parts EN p. 6
• EC Declaration of Conformity EN Technical specifications p. 6
• EN Environmental protection The packaging material can be recycled. Please do not throw the packaging material into household waste; please send it for recycling. Old appliances contain valuable materials that can be recycled; these should be sent for recy- cling. Batteries, oil, and similar substances must not enter the environment. Please dispose of your old appliances using ap- propriate collection systems. Symbols in the operating instructions Proper use 13EN– 2 1 Electrodes 2 Suction hose 3 Push handle 4 Suction head lock 5 Intermediate ring 6 Wheel 7 Chassis 8 Dirt receptacle 9 Steering roller of the chassis with park- ing brake 10 Suction head 11 Steering roller of the dirt container 12 Floor nozzle 13 Suction tube 14 Bow of the placement mechanics 15 Handle of the dirt container 16 Suction support 17 Filter cover 18 Hose and cable hook 19 Bender 20 Electrode extension 21 Rotating knob 22 Carrying handle 23 Floor nozzle holder 24 Holder for crevice nozzle 25 Holder for suction pipes 26 Nameplate 27 Flat fold filter 28 Power cord 29 Filter dedusting – The operating elements for the cleaning process are yellow. – The controls for the maintenance and service are light gray. Caution The flat pleated filter must always be in place while vacuuming. Static charge is deflected by providing earthing to the connection nozzles. This prevents the formation of sparks and cur- rent shocks due to attachments (option) with electrical conductivity. – When vacuuming up fine dust, a dis- posal bag (optional accessory) can ad- ditionally be used. Lock parking brakes. Illustration Pull up the bow of the placement me- chanics. The container is unlocked and lowered. Illustration Pull the container out by the handle. Illustration Insert the disposal bag so that it is snug against the reservoir wall and the reser- voir bottom. Pull disposal bag over the container. Ensure that the disposal bag is not pulled over the suspension lug on the container. Reinstall the container and lock it by means of the bow of the placement me- chanics. 몇 Warning Crush hazard. Never hold your hands between the dirt contain- er and the intermediate ring or put them near the lifting mecha- nism while locking. Lock the container by actuating the bow of the placement me- chanics with both hands. Device elements Colour coding Start up Anti-static system Dry vacuum cleaning Installing the dust disposal bag 14 EN– 3 Illustration Remove the brush strips. Install the rubber lips. Note: The structured side of the rubber lips must point outwards. – To vacuum wet dirt, always remove the disposal bag (option). Lock parking brakes. Illustration Pull up the bow of the placement me- chanics. The container is unlocked and lowered. Illustration Pull the container out by the handle. Illustration Put the disposal bag over. Tightly close disposal bag by means of the closing strip. Remove disposal bag. Dispose of the disposal bag according to the local provisions. Reinstall the container and lock it by means of the bow of the placement me- chanics. 몇 Warning Crush hazard. Never hold your hands between the dirt contain- er and the intermediate ring or put them near the lifting mecha- nism while locking. Lock the container by actuating the bow of the placement me- chanics with both hands. Caution Please observe the local provisions regard- ing the wastewater treatment. – If wet dirt is vacuumed with the uphol- stery or crevice nozzle, or if water is sucked up from a container, it is recom- mended to deactivate the "automatic fil- ter cleaning" function. – If the maximum liquid level is reached the appliance will turn off automatically. – In case of non-conductive liquids (such as emulsion drilling fluids, oils, and greases) the appliance is not turned off when the container is full. The filling level must be continu- ously monitored and the container must be emptied in time. – After the wet vacuuming: Clean the flat folded filter with the filter cleaning. Clean the electrodes and electrode ex- tensions by means of a brush. Clean the container with a damp rag and dry it. Illustration The suction hose is equipped with a clip system. All C-40/C-DN-40 accessories can be connected. Plug in the main plug. Switch on the appliance at the rotating knob. The appliance has an innovative dual filter cleaning system that is particularly effective with fine dust. The flat pleated filter is auto- matically cleaned every 7.5 seconds through an air jet (pulsating sound). Switch off the appliance at the rotating knob. Pull out the mains plug. Wet vacuum cleaning Inserting the rubber lips Removing the dust disposal bag General Clip connection Operation Rotating knob – Appliance ON – Filter dedusting OFF – Appliance OFF – Appliance ON – Filter dedusting ON Turning on the Appliance Automatic filter cleaning Turn off the appliance 15EN– 4 Lock parking brakes. Illustration Pull up the bow of the placement me- chanics. The container is unlocked and lowered. Illustration Pull the container out by the handle. Empty the container. Reinstall the container and lock it by means of the bow of the placement me- chanics. 몇 Warning Crush hazard. Never hold your hands between the dirt contain- er and the intermediate ring or put them near the lifting mecha- nism while locking. Lock the container by actuating the bow of the placement me- chanics with both hands. Vacuum and wipe the appliance inside and outside with a damp cloth. Illustration Store the suction hose and the mains cable as shown in the illustration. Place the appliance in a dry room and secure it from unauthorized use. Caution Risk of injury and damage! Observe the weight of the appliance when you transport it. Remove the suction pipe with the floor nozzle from the holder. Hold the appli- ance at the handle and at the suction pipe to transport it. Grab the appliance by the chassis and by the sliding bow to load it. Pull the device behind you at the carry- ing handle for transporting it over longer distances When transporting in vehicles, secure the appliance according to the guide- lines from slipping and tipping over. Caution Risk of injury and damage! Note the weight of the appliance in case of storage. This appliance must only be stored in inte- rior rooms. Danger First pull out the plug from the mains before carrying out any tasks on the machine. Open filter door. Replace the flat pleated filter. Close the filter door, it must lock into place. Lock parking brakes. Illustration Pull up the bow of the placement me- chanics. The container is unlocked and lowered. Illustration Pull the container out by the handle. Illustration Put the disposal bag over. Tightly close disposal bag by means of the closing strip. Remove disposal bag. Dispose of the disposal bag according to the local provisions. Illustration Insert the new disposal bag so that it is snug against the reservoir wall and the reservoir bottom. Pull disposal bag over the container. Ensure that the disposal bag is not pulled over the suspension lug on the container. Reinstall the container and lock it by means of the bow of the placement me- chanics. After each operation Empty the container Cleaning the device Storing the Appliance Transport Storage Maintenance and care Exchanging the flat pleated filter Replace the disposal bag 16 EN– 5 몇 Warning Crush hazard. Never hold your hands between the dirt contain- er and the intermediate ring or put them near the lifting mecha- nism while locking. Lock the container by actuating the bow of the placement me- chanics with both hands. Release and remove the suction head. Clean the electrodes as well as the space between the electrodes with a brush. Clean electrode extensions by means of a brush. Insert and lock the suction head. Danger First pull out the plug from the mains before carrying out any tasks on the machine. Check the receptacle and the fuse of the power supply. Check the power cable, the power plug, the electrodes and the electrode exten- sions of the device. Turn on the appliance. Empty the container. Turn off the appliance and wait for 5 seconds, turn it on again after 5 sec- onds. Clean the electrodes as well as the space between the electrodes with a brush. Clean electrode extensions by means of a brush. Remove blockages in the suction noz- zle, suction tube, suction hose, or flat pleated filter. Replace the filled disposal bag (option). Ensure the filter cover properly locks into place. Replace the flat pleated filter. Check for proper installation of the flat pleated filter. Replace the flat pleated filter. Clean the electrodes as well as the space between the electrodes with a brush. Clean electrode extensions by means of a brush. Continuously check the filling level in case of non-conductive liquid. Suction hose is not connected. Inform Customer Service Inform Customer Service Clean electrodes and electrode extensions Troubleshooting Suction turbine does not run Suction turbine turns off Suction turbine does not start again after the container has been emptied Suction capacity decreases Dust comes out while vacuuming Automatic shut-off (wet vacuum cleaning) does not react Automatic filter cleaning is not working Automatic filter cleaning cannot be switched off Automatic filter cleaning cannot be switched on 17EN– 6 The warranty terms published by the rele- vant sales company are applicable in each country. We will repair potential failures of your appliance within the warranty period free of charge, provided that such failure is caused by faulty material or defects in man- ufacturing. In the event of a warranty claim please contact your dealer or the nearest authorized Customer Service centre. Please submit the proof of purchase. – Only use accessories and spare parts which have been approved by the man- ufacturer. The exclusive use of original accessories and original spare parts ensures that the appliance can be oper- ated safely and trouble free. – At the end of the operating instructions you will find a selected list of spare parts that are often required. – For additional information about spare parts, please go to the Service section at www.kaercher.com. We hereby declare that the machine de- scribed below complies with the relevant basic safety and health requirements of the EU Directives, both in its basic design and construction as well as in the version put into circulation by us. This declaration shall cease to be valid if the machine is modified without our prior approval. 5.957-701 The undersigned act on behalf and under the power of attorney of the company man- agement. Authorised Documentation Representative S. Reiser Alfred Kärcher GmbH Co. KG Alfred-Kärcher-Str. 28 - 40 71364 Winnenden (Germany) Phone: +49 7195 14-0 Fax: +49 7195 14-2212 Winnenden, 2010/07/14 Warranty Accessories and Spare Parts EC Declaration of Conformity Product: Wet and dry vacuum cleaner Type: 1.667-xxx Relevant EU Directives 2006/42/EC (+2009/127/EC) 2004/108/EC Applied harmonized standards EN 55014–1: 2006+A1: 2009+A2: 2011 EN 55014–2: 1997+A1: 2001+A2: 2008 EN 60335–1 EN 60335–2–69 EN 61000–3–2: 2006+A1: 2009+A2: 2009 EN 61000–3–3: 2008 EN 62233: 2008 Applied national standards p. 7

www.kaercher.com/REACH