HB122828 - Blender Emerio - Free user manual and instructions

USER MANUAL HB122828 Emerio

1. Always disconnect the appliance from the supply if it

is left unattended and before assembling, disassembling or cleaning.

2. This appliance shall not be used by children. Keep

the appliance and its cord out of reach of children.

3. Appliances can be used by persons with reduced

physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.

4. Children shall not play with the appliance.

5. If the supply cord is damaged, it must be replaced by

the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

6. Switch off the appliance and disconnect from supply

before changing accessories or approaching parts that move in use.

7. Warning: Potential risk of injuries from misuse.- 17 -

8. Before inserting the plug into the mains socket,

please check that the voltage and frequency comply with the specifications on the rating label.

9. Do not continuously operate the blender too long.

The motor may overheat. Do not operate the blender for more than 60 seconds at a time.

10. Disconnect the mains plug from the socket when the

appliance is not in use and before cleaning.

11. Ensure that the mains cable is not hung over sharp

edges and keep it away from hot objects and open flames.

12. Do not immerse the appliance or the mains plug in

water or other liquids. There is danger to life due to electric shock!

13. To remove the plug from the plug socket, pull the

plug. Do not pull the power cord.

14. Do not touch the appliance if it falls into water.

Remove the plug from its socket, turn off the appliance and send it to an authorized service center for repair.

15. Do not plug or unplug the appliance from the

electrical outlet with a wet hand.

16. Never attempt to open the housing of the appliance,

or to repair the appliance yourself. This could cause electric shock.

17. Never leave the appliance unattended during use.

18. This appliance is not designed for commercial use.

19. Do not use the appliance for other than intended

20. Do not wind the cord around the appliance and do

21. The use of attachments or accessories not

recommended or sold by the manufacturer may cause fire, electric shock or injury.

22. The blades are sharp. Take great care when handling

23. Regarding the instructions for cleaning the surfaces

which come in contact with food, speed settings and operating times, please refer to the below paragraph of the manual.- 19 -

1. Switch button (low speed)

2. Turbo button (high speed)

3. Hand-held stick ( Motor housing )

1. This device is designed to handle average amounts of food. It can be used

without interruption for a maximum of 1 minute. After that, it should be allowed to cool for 1 minute otherwise it will overheat.

2. Do not use the appliance to blend very hard and/or dry foods. Do not use it

3. Never blend hot oil or fat.

1. Carefully unpack the appliance and remove all packaging material.

2. Clean the blend rod and blade in warm soapy water. Rinse and dry them thoroughly before assembling.

3. To assemble the blender, fit the hand-held stick with the blend rod, rotate to make the triangle logo

point at the logo . To dissemble it, rotate to make the triangle logo point at the logo .

1. The appliance blends and mixes fast and easily. Use it to make sauces, soups, mayonnaise, purees, dietary

and baby food, mixed drinks or cocktails. You can operate the stick blender in any bowl, pan or other containers. If you want to blend directly in a saucepan, you should take the saucepan away from the stove first and let it cool down slightly.

2. To avoid splashing, insert the stick blender into the vessel first, and then press the switch button/turbo

button. Keep the button pressed for operation. To turn off your stick blender, simply release the button.

CLEANING AND MAINTENANCE

1. Before cleaning, unplug the power cord from the electrical outlet.

2. Detach the blend rod from the hand-held stick. Clean the blend rod and blade in warm soapy water. Rinse

and dry them thoroughly before assembling back.

3. Wipe the outer surface of the blender body with a damp cloth.

4. Never wash the motor housing in water or any other liquids.

5. Do not touch the sharp blade.

6. Do not wash any parts in a dishwasher.

Recycling – European Directive 2012/19/EU This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. Emerio Deutschland GmbH (no service address) Lerchenweg 3 40789 Monheim am Rhein Deutschland Customer service: T: +49 (0) 3222 1097 600 E: info.de@emerio.eu