GAM68SMS2L - Motherboard GIGABYTE - Free user manual and instructions

USER MANUAL GAM68SMS2L GIGABYTE

☐ EN 55011	Lunds and methods of measurement of radio destitance certificate of industrial services and materials (GN)	☐ EN 51000-1-2	Disturbances in supply systems caused by households' operations and sector sectors
☐ EN 55013	Lunds and methods of measurement of radio destitance certificate of roaders recovers and associated equipment	☐ EN 55024	Information Technology requirement frequency
☐ EN 55014-1	Lunds and methods of measurement of radio destitance certificate of forested electrical appliances	☐ EN 50082-1	Generic regularly standard Pan T reader, commercial and jahr industry
☐ EN 55016	Lunds and methods of measurement of radio destitance certificate of portable tabs and smaller electronic equipment	☐ EN 50002-2	Generic regularly standard Pan 2 industrial service
☐ EN 55020	Invenuity from radio manufacturers of broadband lamps and internetes	☐ EN 50091-2	E&C requirements for uninterprets power systems (JWS)
☐ EN 55022	Lunds and methods of measurement of radio destitance certificate of information technology equipment	☐ EN 55014-2	Temporary requirements for household appliances
☐ OII VOE 0855	Cable distribution systems Equipment for necessary and distribution from sound and television spairs	☐ EN 50501	CE
☐ part 17	☐ part 17	☐ EN 50501	Supply for information technology equipment
☐ CN VOE 0855	Safety requirements for means operated electronics and related opportunities for household and smaller general use	☐ EN 50501	General and safety requirements for unprepable power systems (JPS)
☐ EN 60335	Safety of household and similar electrical appliances	☐ EN 50501-1	General and safety requirements for unprepable power systems (JPS)
☐ EN 60065	Safety requirements for means operated electronics and related opportunities for household and smaller general use	☐ EN 50501	Supply for information technology equipment

Date: Oct. 2, 2007

Signature: Eric Lu

Representative Person's Name: ERIC LU

including that may cause undesired operation.

cause harmful and (2) this device must accept any interest received,

subject to the following two conditions: (1) This device may not

This device complies with part 15 of the FCC Rules. Operation is

Supplementary Information:

(a),Class B Digital Device

FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109

Conforms to the following specifications:

Model Number: GA-M68SM-S2L

Product Name: Motherboard

horby declares that the product

Phone/Fax No:[phone]/ [phone]

City of Industry, CA 91748

Address: 17358 Railroad Street

Responsible Party Name: G.B.T.INC. (U.S.A.)

Per FCC Part 2 Section 2.1077(a)

DECILARATION OF COMPANY

版權

Close-up of a blue computer motherboard with a highlighted CPU socket and indicator lights (no readable text or symbols)

目錄

清點配件 6

選購配件 6

2-5 Integrated Peripherals (整合週邊設定) 39

2-6 Power Management Setup ( 省電功能設定) 43

2-7 PnP/PCI Configurations ( 隨插即用與 PCI 組態設定) 45

2-8 PC Health Status (電腦健康狀態) 46

2-9 Load Fail-Safe Defaults (载入最安全預設值) 48

2-10 Load Optimized Defaults (载入最佳化預設值) 48

2-11 Set Supervisor/User Password (設定管理者/使用者密碼) 49

2-12 Save & Exit Setup (儲存設定值並結束設定程式) 50

2-13 Exit Without Saving (結束設定程式但不儲存設定值) 50

第三章 驅動程式安裝 51

Close-up of a computer motherboard with CPU socket and RAM slots (no visible text or symbols)

Diagram of a computer motherboard layout showing CPU socket, RAM slots, and memory components (no text or labels)

Close-up of a computer processor with a highlighted circular region (no visible text or symbols)

步驟二：

Close-up of a microchip mounted on a circuit board (no visible text or symbols)

步驟一：

Interior view of a train manufacturing facility showing a large orange locomotive on a platform with machinery and no visible text or symbols.

步驟二：

將散熱風扇放在上。

Close-up of an orange plastic component mounted on a blue circuit board (no visible text or symbols)

步驟三：

Close-up of an electronic device with orange components and a computer motherboard (no visible text or symbols)

步驟四：

Close-up of a blue CPU fan with green and orange components, no visible text or symbols on the board (pure technical labels)

步驟五：

▶ 通道0 (Channel 0) DDRII_1 (1插槽
▶ 通道1 (Channel 1) DDRII_2 (2)插槽

Diagram of a computer motherboard with labeled components and an inset showing DDRII_1 and DDRII_2 drive layouts.

Close-up of a computer motherboard with a colorful RAM module being processed, no visible text or symbols

步驟一：

Close-up of a computer motherboard with visible CPU socket and keyboard, showing two yellow-circled components (no text or symbols)

步驟二：

Top-down view of a computer motherboard showing CPU socket, RAM slots, and memory card (no text or labels)

PCI Express x1 插槽

PCI插槽

Close-up of hands installing or adjusting a computer motherboard with visible CPU socket, RAM slots, and heatsink (no text or symbols)

- 安裝顯示卡：

Diagram of computer ports and connectors with labeled labels a through i, showing connections between electronic devices.

PS/2 鍵盤及 滑鼠插座

連接 PS/2 鍵盤及滑鼠至此插座。

Labeled diagram of a computer motherboard showing internal components and connectors

Top-down view of a computer motherboard showing CPU socket, RAM slots, and memory components (no text or labels)

ATX_12V :

Diagram of a computer motherboard with labeled components and highlighted slots for CPU, RAM, and memory

CPU_FAN :

Exploded view diagram of a computer motherboard showing CPU socket, RAM slots, and memory card (no text or labels)

34 33 2 1

6) IDE (IDE) 插座

Top-down view of a computer motherboard showing CPU socket, RAM slots, and memory card (no text or labels visible)

40 39 2 1

7) SATAII0 / 1 / 2 / 3 (SATA 3Gb/s) 插座

Diagram of a computer motherboard layout with labeled components and connectors

Yellow cable with black connectors, one circled in pink (no text or symbols visible)

Diagram of a computer motherboard layout with labeled components and connectors

1

Exploded view diagram of a computer motherboard showing CPU socket, RAM slots, and memory components (no text or labels)

Simple line drawing of a circular object with a plus sign at center and a rectangular base (no text or symbols)

Diagram of a computer motherboard layout with labeled components and a highlighted circular annotation pointing to a specific component.

graph TD
    A["Message/Power/Sleep LED"] --> B["MSG+"]
    B --> C["MSG-"]
    C --> D["PW+"]
    D --> E["PW-"]
    E --> F["Speaker Connector"]
    F --> G["SPEAK+"]
    G --> H["SPEAK-"]
    H --> I["20"]
    I --> J["19"]
    J --> K["RES+"]
    K --> L["HD-"]
    L --> M["HD+"]
    M --> N["IDE Hard Disk Active LED"]
    K --> O["NC"]
    O --> P["Reset Switch"]

-MSG (Message/Power/Sleep LED) —訊息指示燈：

Diagram of a computer motherboard with labeled components and numbered connectors

HD 接頭定義：

接腳	定義
1 MIC2_L
2	接地腳
3 MIC2_R
4 -ACZ_DET
5 LINE2_R
6 FAUDIO_JD
7	接地腳
8	無接腳
9 LINE2_L
10 FAUDIO_JD

AC'97 接頭定義：

Diagram of a computer motherboard layout with labeled components and connectors

Diagram of a computer motherboard layout with labeled components and a magnified view of the CPU socket

1

Exploded view diagram of a computer motherboard showing CPU socket, RAM slots, and memory components (no text or labels)

Top-down schematic of a computer motherboard showing CPU socket, RAM slots, and memory drive (no text or labels)

接腳	定義
1 NDCD-
2 NSIN
3 NSOUT
4 NDTR-
5	接地腳
6 NDSR-
7 NRTS-
8 NCTS-
9 NRI-
10	無接腳

16) Cl ( )電腦機殼被開啟偵測

Technical diagram of a computer motherboard layout with CPU socket, RAM slots, and connectors (no text or labels)

接腳	定義
1	訊號腳
2	接地腳

17) CLR\_CMOS (CMOS) 資料功能接脚

Technical diagram of a computer motherboard layout with labeled components and connectors

開路：一般運作

短路：清除 CMOS 資料

•BIO\$ (load Optimized Defaults) 預設值

或自行輸入設

Date (mm:dd:yy)	Tue, Aug 28 2007	Item Help
Time (hh:mm:ss)	22:31:24	Menu Level▶
IDE Channel 0 Master	[None]
IDE Channel 0 Slave	[None]
IDE Channel 2 Master	[None]
IDE Channel 2 Slave	[None]
IDE Channel 3 Master	[None]
IDE Channel 3 Slave	[None]
Drive A	[1.44M, 3.5"]
Floppy 3 Mode Support	[Disabled]
Halt On	[All Errors]
Base Memory	640K
Extended Memory	510M
↑↓→←: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Default F7: Optimized Defaults

▶ IDE Channel 0 Master/Slave IDE/SATA

設備的參數。有以下三個選項：

▶ Precomp (Precompensation)賞磁區

iGPU Frame Buffer Control

CMOS Setup Utility-Copyright (C) 1984-2007 Award Software Integrated Peripherals
Serial-ATA RAID Config On-Chip IDE Channel0 IDE DMA transfer access On-Chip MAC Lan NV Serial-ATA 1 IDE Prefetch Mode Onchip SATA Mode Onboard Audio Function SMART LAN OnBoard LAN Boot ROM Onboard Serial Port Onboard Parallel Port Parallel Port Mode x ECP Mode Use DMA USB Device Setting	[Press Enter] [Enabled] [Enabled] [Auto] [Enabled] [Enabled] [IDE] [Auto] [Press Enter] [Disabled] [3F8/IRQ4] [378/IRQ7] [SPP] 3 [Press Enter]	Item Help Menu Level▶
↑↓→←: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

Serial-ATA RAID Config

x NV SATA Pri-Master RAID Enabled x NV SATA Pri-Slave RAID Enabled x NV SATA Sec-Master RAID Enabled x NV SATA Sec-Slave RAID Enabled	Item Help
	Menu Level▶
↑↓→←: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

USB Device Setting

USB Controllers [Enabled] USB Keyboard Function [Enabled] USB Mouse Function [Disabled] USB Storage Function [Enabled]	Item Help
	Menu Level▶
↑↓→←: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

NV SATA Pri-Master RAID

CMOS Setup Utility-Copyright (C) 1984-2007 Award Software SMART LAN Start detecting at Port...... Pair1-2 Status = Open / Length = 0.0m Pair3-6 Status = Open / Length = 0.0m Pair4-5 Status = Open / Length = 0.0m Pair7-8 Status = Open / Length = 0.0m ↑↓→←: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Item Help Menu Level▶

Start detecting at Port.... Link Detected --> 100Mbps Cable Length=30m 

例：Pair1-2 Status = Short / Length = 1.6m

Onboard Parallel Port (內建並列埠

ACPI Suspend Type Soft-Off by Power button PME Event Wake Up Modem Ring On USB Resume from Suspend Power-On by Alarm x Day of Month Alarm Everyday x Time (hh:mm:ss) Alarm HPET Support (#) HPET Mode (#) Power On By Mouse Power On By Keyboard x KB Power ON Password AC Back Function	[S1(POS)] [Instant-Off] [Enabled] [Enabled] [Disabled]	Item Help
		Menu Level▶
		0:0:0
		[Enabled]
		[32-bit mode]
		[Disabled]
		[Disabled]
		Enter
		[Soft-Off]
↑↓→←: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

Power-On by Alarm (定時開機

Power On By Keyboard (鍵盤開機功能

PCI1 IRQ Assignment [Auto] PCI2 IRQ Assignment [Auto]	Item Help
	Menu Level▶
↑↓→←: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

3,4,5,7,9,10,11,12,14,15

由自動指定。預設值

▶ 3,4,5,7,9,10,11,12,14,15

由 自動指定。預設值

Reset Case Open Status	[Disabled]	Item Help
Case Opened	Yes	Menu Level▶
Vcore	OK
DDR2 1.8V	OK
+3.3V	OK
+12V	OK
Current System Temperature	33 °C
Current CPU Temperature	42 °C
Current CPU FAN Speed 3375 RPM
Current SYSTEM FAN Speed	0 RPM
System Warning Temperature	[Disabled]
CPU Warning Temperature	[Disabled]
CPU FAN Fail Warning	[Disabled]
SYSTEM FAN Fail Warning	[Disabled]
CPU Smart FAN Control	[Enabled]
CPU Smart FAN Mode	[Auto]
↑↓→←: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

Reset Case Open Status (重置機殼狀況

▶ Disabled ( ) 保留之前機殼被開啟狀況的紀錄。預設值
▶ Enabled 清除之前機殼被開啟狀況的紀錄。

Case Opened (機殼被開啟狀況

Current CPU/SYSTEM FAN Speed (RPM) (偵測風扇轉速

自動偵測 CPU/ 系統風扇的轉速。

System/CPU Warning Temperature (ACPU) 溫度警告

GIGABYTE NVIDIA GeForce 7000 / nForce 630a series Utility CD 安裝晶片組 驅動程式 軟體應用程式 驅動程式光匯 資訊 硬體資訊 與我們聯繫 軟簡選用程式 請按一下來以下列出的應用程式安排。 Norton Internet Security(NIS) Size 46.9MB Please install Windows Installer 3.1 before to install MS in Windows XP SP2 Click to Download Windows Installer 3.1 Noton Internet Security provides essential protection from viruses hackers and privacy threats. It includes: - Norton Antivirus - Norton Personal Firewall - Norton Privacy Control - Norton AntiSpam - Norton Parental Control Kaspersky antivirus Size 27.3MB Kaspersky antivirus Acrobat Reader Size 15.9MB Utility for viewing or printing Adobe Portable Document Format (PDF) files GIGABYTE C.O.M. (Corporate Online Manager) Size 9.0MB A web-based system management tool that allows client system hardware information such as CPU and memory and graphics card and much more to be monitored or controlled via a host. EasyTune 8 Size 4.9MB level

3-3 驅動程式光碟資訊

. . Boot from CD/DVD: Press any key to startup XpressRecovery2.....

圖 8

E. Xpress Recovery2 (remove) 功能

Q-Flash Utility v2.02 Flash Type/Size......Winbond 25X40 512K Keep DMI Data Enable Update BIOS from Drive 0 file(s) found vc En Floppy A HDD 0-0 Total size : 0 Free size : 0

1. B10S选择Enter要更新的

檔案並按下

鍵。

Q-Flash Utility v2.02 Flash Type/Size............Winbond 25X40 512K Keep DMI Data Enable !! Copy BIOS completed - Pass!! Please press any key to continue

步驟四：

按下 Q-Flash 键離開

POST BIOS的 版本即已更新。

，此時系統將自動重新開機。重新開機後，

步驟五：

Please select one file to update WARNING: Before you select the model name from the list below, please select the event model name on snow neighborhood. If you select the version model name to update the BIVV, your computer will not want. Model Name: OA-ENKEX-GLI NOTICE a Planet GLI, a RACE-DECE, Vee F11 OK Cancel

步驟三：

Gigabyte - uBIOS Utility Ver. 1-20 Current Motherboard Info Flash Memory Type: Winbond 25x40 Flash Memory Size: 4M Bits BIOS Sign On Message: NERSM-S BIOS Vendor: Award BDIS "Update New BIOS" Find BIOS From Gigabyte Clear DNI Data Pool Clear PrP Data Pool Check @BIOS Updates... Update New BIOS Save Current BIOS About this program Exit 100% Done

步驟一：

Message Do you want to Update BICS ? 确定 取消

步驟三：

進入「Integrated Peripherals NV Serial-ATA 1

」為開啟狀態。若要設定磁碟陣

CMOS Setup Utility-Copyright (C) 1984-2007 Award Software Integrated Peripherals

Serial-ATA RAID Config [Press Enter]		Item Help
On-Chip IDE Channel0 [Enabled]		Menu Level▶
IDE DMA transfer access [Enabled]
On-Chip MAC Lan [Auto]
NV Serial-ATA 1 [Enabled]
On-Chip SATA Mode [RAID]
Onboard Audio Function [Auto]
SMART LAN [Press Enter]
OnBoard LAN Boot ROM [Disabled]
Onboard Serial Port [2F8/IRQ3]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]
x ECP Mode Use DMA 3
USB Device Setting [Press Enter]
↑↓→←: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

圖 1

圖 4

分配磁碟：

MediaShield Utility Apr 16 2007 - Define a New Array - RAID Mode: Striped Stripe Block: Optimal Free Disks Port Disk Model All data on new(or added) disks will be overwritten. Continue? [ Y ] YES [ N ] NO Capacity 111.79GB 111.79GB [←] Del [ESC] Quit [F6] Back [F7] Finish [TAB] Navigate [↑↓] Select [ENTER] Popup

图6

MediaShield Utility Apr 16 2007 - Array List - Boot Status Nevada Array Model Name BBS Healthy NVIDIA STRIPE 223.57G [Ctrl-X] Exit [↑↓] Select [B] Set Boot [N] New Array [ENTER] Detail

图7

Array 1: NVIDIA STRIPE 233.57G - Array Detail - RAID Mode: Striped Stripe Width : 2 Stripe Block: 64K Port Index Disk Model Capacity 1 0 ST3120026AS 111.79GB 2 1 ST3120026AS 111.79GB [R] Rebuild [D] Delete [C] Clear MBR [ENTER] Return

圖8

Windows Setup Press F6 if you need to install a third party SCSI or RAID driver.

圖 1

步驟二：

Setup could not determine the type of one or more mass storage devices installed in your system, or you have chosen to manually specify an adapter. Currently, Setup will load support for the following mass storage devices(s)

* To specify additional SCSI adapters, CD-ROM drives, or special disk controllers for use with Windows, including those for which you have a device support disk from a mass storage device manufacturer, press S.

* If you do not have any device support disks from a mass storage device manufacturer, or do not want to specify additional mass storage devices for use with Windows, press ENTER.

S=Specify Additional Device ENTER=Continue F3=Exit

圖 2

步驟三：

Windows Setup You have chosen to configure a SCSI Adapter for use with Windows, using a device support disk provided by an adapter manufacturer. Select the SCSI Adapter you want from the following list, or press ESC to return to the previous screen. NVIDIA RAID Driver (required) NVIDIA nForce Storage Controller (required) ENTER=Select F3=Exit

圖 3

Windows Setup Setup will load support for the following mass storage device(s): NVIDIA RAID Driver (required) * To specify additional SCSI adapters, CD-ROM drives, or special disk controllers for use with Windows, including those for which you have a device support disk from a mass storage device manufacturer, press S. * If you do not have any device support disks from a mass storage device manufacturer, or do not want to specify additional mass storage devices for use with Windows, press ENTER. S=Specify Additional Device Enter=Continue F3=Exit

圖 4

Setup will load support for the following mass storage device(s):

NVIDIA RAID Driver (required) NVIDIA nForce Storage Controller (required)

* To specify additional SCSI adapters, CD-ROM drives, or special disk controllers for use with Windows, including those for which you have a device support disk from a mass storage device manufacturer, press S.
* If you do not have any device support disks from a mass storage device manufacturer, or do not want to specify additional mass storage devices for use with Windows, press ENTER.

S=Specify Additional Device ENTER=Continue F3=Exit

圖 5

步驟四：

Close-up of hands installing a black component on a circuit board (no visible text or symbols)

步驟一：

Close-up of a white cable inserted into a computer motherboard with blue circuit board (no visible text or symbols)

步驟二：

Close-up of a hand inserting a small electronic component into a computer drive (no visible text or symbols)

S/PDIF 同軸輸出線

步驟三：

Close-up of a finger pressing a button on a computer panel (no visible text or symbols)

S/PDIF 光纖輸出線

B. S/PDIF 音效輸出設定：

Windows XP desktop wallpaper showing a green hill under a blue sky with clouds, no visible text or symbols on the screen.

步驟二：

Computer desktop wallpaper showing a green hill under a blue sky with clouds, no visible text or symbols.

步驟四：

Management Methods on Control of Pollution from Electronic Information Products

(China RoHS Declaration)

GIGABYTE® GTS Global Technical Service Welcome to GIGABYTE Service system. If you want to submit new question or check our response, please enter your E mail address and press the button to log it. Your Email : 繁體中文 Deutsch 周体中文 Français Polski English