Essos - Fireplace Blumfeldt - Free user manual and instructions
Find the device manual for free Essos Blumfeldt in PDF.
Download the instructions for your Fireplace in PDF format for free! Find your manual Essos - Blumfeldt and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Essos by Blumfeldt.
USER MANUAL Essos Blumfeldt
Dear Customer, Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damages. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information. CONTENTS Safety Instructions 10 Parts 12 Assembly 13 Cleaning and Care 14 MANUFACTURER & IMPORTER (UK) Manufacturer: Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany. Importer for Great Britain: Berlin Brands Group UK Ltd PO Box 1145 Oxford, OX1 9UW United Kingdom10
SAFETY INSTRUCTIONS WARNING Risk of suffocation! This re pit is for outdoor use only and shall not be used in a building, garage or any other enclosed area. Toxic carbon monoxide fumes can accumulate and cause asphyxiation.
- This re pit is not for commercial use.
- This re pit should only be used by adults and all children and pets should be kept at a safe distance.
- Do not use petrol, white spirit, lighter uid, alcohol or other similar chemicals to light a re as a rapid increase in temperature could damage the re pit. This re pit is only suitable for use with charcoal, untreated wood or dry logs. Do not use coal.
- Do not use this re pit until it is completely assembled and all parts are securely fastened and tightened.
- Do not use the re pit on decking or any other ammable surfaces such as dry grass, wood chips, leaves.
- Always empty this re pit after use. Leave a thin layer of ash to protect the bottom. Do not remove ashes or charcoal until they are completely and fully extinguished.
- Do not touch the re pit until it is completely cooled unless you are wearing heat resistant gloves as it is hot when in use.
- Do not handle or move the re pit when in use as it is hot.
- Do not attempt to store the re pit until all ashes and charcoals are completely extinguished.
- Always use a safety tool and heat resistant gloves when adding or moving fuel.
- Do not leave a burning re unattended.
- Fire hazard-Hot embers may emit while in use.
- Do not overload the re pit with fuel. Do not add additional fuel until the re burns down. If an portion of the re bowl is growing red, it is overloaded.
- Do not burn fuel directly on the re bowl base.
- Do keep the fuel away from the wall of the re pit as the high temperature may damage it.
- Avoid breathing smoke from the re and avoid getting it into your eyes.
- Always thoroughly inspect the re pit before use.
- A slight discolouration of nish may occur after use.11
Special instructions for grills
- Do not place the food on the grill until the fuel is covered with a layer of ash!
- The appliance becomes very hot and must not be moved during operation.
- Do not use the appliance in closed rooms.
- Do not use spirit or petrol for ignition or reignition. Only use ignition aids in accordance with EN 1860-3.
- Keep children and pets away from the appliance. CAUTION!
ASSEMBLY 1 Place the chimney (2) on the hood (3). Fasten it with the screws (4). 2 Attach the base (8) to the body (6). Fasten it with the screws (4). 3 Attach the hood (3) to the body (6) with the screws (4). 4 Insert the ash grate (7) into the carcase (6). 5 Attach the door (5) to the body (6). 6 Place the lid (1) on the ue (2).14
CAUTION Danger of burns! Allow the replace to cool completely before inspecting or cleaning it for damage. Inspect the fi replace for damage Check the replace regularly for damage to ensure product safety and a longer service life.
1. Check all parts to make sure they are tight.
2. Check the components for damage.
3. If you nd damage to a component, have the replace repaired before
continuing to use it. Cleaning
- Make sure that the re is completely extinguished when you no longer use the replace.
- Make sure the re is completely extinguished and the replace has cooled down before removing the ashes.
- Use a damp cotton cloth to remove soot. Clean the replace regularly to ensure a long service life. Note: The surface may discolour after repeated use.
- Do not use oven cleaner or scouring agents, as these can damage the product.
- Clean the outside with water and a mild dishwashing liquid.
- For stubborn stains, use a citrus-based cleaner and a nylon brush.15
ManualGo.com