Starnberg - Water pump Blumfeldt - Free user manual and instructions

USER MANUAL Starnberg Blumfeldt

Dear Customer, Congratulations on purchasing this equipment. Please read this manual carefully and take care of the following hints to avoid damages. Any failure caused by ignoring the items and cautions mentioned in the instruction manual is not covered by our warranty and any liability. Scan the QR code to get access to the latest user mannual and other information about the product. CONTENT TECHNICAL DATA Item number 10033352 Power supply 220-240 V ~ 50 Hz Power (Watt) 12 W Safety Instructions12 Packing Content13 Assembly14 Instructions on the Pump15 Disposal Considerations16 Manufacturer & Importer (UK)1612

• To reduce the risk of electric shock, do not remove any of the covers. The unit contains parts that are not accessible to the user.

• The device label is located on the back of the device.

• Always disconnect the mains connection before cleaning the well and/or pump.

• This decorative fountain is suitable for indoor and outdoor use.

• Never operate the pump without water.

• If the cable or adapter is damaged, be sure to replace it with identical parts before continuing to use it. Have repairs carried out by qualied personnel only. Repair is required if the appliance has been damaged in any way, i.e. if objects have fallen on it, if it does not function properly or if it has been dropped. Do not attempt to repair the unit yourself.

• Do not reach into the water during operation.

• Please be careful when using the unit by or near children, the physically handicapped or the elderly. This device may only be used by persons (including children) with limited physical, sensory or mental abilities after detailed instruction. Children should be supervised to ensure that they do not play with the equipment.

• Operate the pump only in conjunction with tap water or fresh water at temperatures up to 35 °C or lower.

• Use distilled water or change the water at regular intervals to prevent damage from settling contaminants such as lime or bacterial contamination.

• Check the function of the pump and the cleanliness of the well regularly, especially if the well is in operation for a long time.

• If you do not use the well for a long time, disconnect the power and remove the water.13

PACKING CONTENT A: Wooden bucket B: Handle pump C: 3 Screws D: Electric pump14

Note: Ensure that the electrical cord loops below the electrical outlet to form a “Drip Loop”. This will prevent water from running down the cord into the electrical outlet.

• To avoid electric shock, connect the plug to a grounded outlet only.

• Do not modify the plug.

• Check the voltage on the equipment label before use. Only connect the device to sockets that correspond

• to the voltage of the device.

• Do not pump ammable liquids

• Do not use with water above 35°C.

• The pump is to be supplied through a residual current device (RCD) with a rated residual operating current not exceeding 30mA. Notes on Performance

• A clogged or dirty intake screen will greatly reduce performance. If the pump is used on a dirty surface, raise it slightly to reduce the amount of debris contacting the intake. If slower ow is desired, adjust the ow control lever on the side of the pump or restrict the discharge ow.

• Do not let the pump run when not submerged in water. Doing so may damage the pump. Always submerge the pump in the water before plugging in the electrical outlet. It is common for air to be in the pump and tube when rst plugged in. Continue to unplug the electrical cord and then plug it back in until water begins to ow.DISPOSAL CONSIDERATIONS If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service. MANUFACTURER & IMPORTER (UK) Manufacturer: Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany. Importer for Great Britain: Berlin Brands Group UK Ltd PO Box 1145 Oxford, OX1 9UW United Kingdom17