CEPL51 - Grill plate CONTINENTAL EDISON - Free user manual and instructions

Brand	Continental Edison
Model	CEPL51
Product type	Electric grill plate (plancha)
Power supply	220-240 V ~ 50-60 Hz
Power	2200 W
Dimensions (L x W x H)	Approximately 50 x 30 x 10 cm
Weight	Approximately 4.5 kg
Cooking surface	Non-stick coating (anti-adhesive)
Thermostat	Adjustable with indicator light
Removable thermostat	Yes, removable for cleaning
Heat indicator light	Yes, lights up when heating
Use	Domestic use only, indoor
Maintenance and cleaning	Clean with a damp cloth or soft sponge; do not immerse the thermostat or the appliance
Safety	Not to be used by children under 8 without supervision; hot surfaces; unplug before cleaning
Material	Metal with non-stick coating
Color	Black (typical)
EAN code / Reference	CEPL51 (AN-152P)
Included accessories	Removable thermostat
Warranty	2 years (standard)

Frequently Asked Questions - CEPL51 CONTINENTAL EDISON

How to use the grill plate for the first time?

Remove all packaging, wipe the plate with a damp cloth, then dry it. Set the thermostat to "OFF" before plugging in the appliance. Insert the thermostat into the plate, turn the knob clockwise to turn on the appliance. Before the first cooking, apply a little oil to the non-stick surface.

How to clean the grill plate?

After use, set the thermostat to "OFF" and unplug the appliance. Remove the thermostat. Wipe the warm plate with a damp cloth or a soft sponge. For stubborn residue, allow it to cool, then use a soft sponge with a little non-abrasive dish soap. Never immerse the appliance or the thermostat in water.

Can I use metal utensils on the plate?

No, to preserve the non-stick coating, use only wooden, silicone, or heat-resistant plastic utensils. Sharp metal utensils or knives may scratch the surface.

What should I do if the plate does not heat up?

Check that the thermostat is properly inserted into the plate and that the knob is not set to "OFF". Ensure the appliance is plugged into a functioning outlet. If the indicator light does not turn on, the thermostat may be defective; contact customer service.

The indicator light turns on and off during cooking, is this normal?

Yes, this is normal. The light turns on when the appliance heats up and turns off when the desired temperature is reached. It turns on again automatically to maintain a constant temperature.

Since it's electric, can I use it outdoors?

No, this appliance is designed for indoor domestic use only. Do not use it outdoors or in damp areas to avoid electric shock risk.

How to store the plate after use?

Allow it to cool completely, clean it, and dry it thoroughly. Store it in a dry, dust-free place. You can wind the cord taking care not to bend it near the plug.

What is the power of the appliance?

The appliance has a power of 2200 W at 220-240 V ~ 50-60 Hz. It heats quickly and is suitable for grilling meats, vegetables, etc.

Is the thermostat removable?

Yes, the thermostat can be removed from the plate. Always remove it before cleaning the appliance and ensure it is completely dry before reinserting it.

Can children use this appliance?

This appliance can be used by children aged 8 and above under adult supervision, provided they have understood the safety instructions. Children must not play with the appliance. Cleaning must not be performed by children under 8 years.

USER MANUAL CEPL51 CONTINENTAL EDISON

ÉLIMINATION CORRECTE DE CE PRODUIT

When using an electrical appliance, always follow the following basic safety precautions.

Please read all the instructions and keep them for future use.

1. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
2. Children shall not play with the appliance.
3. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised.
4. Keep the appliance and its cord out of reach of children less than 8 years.
5. The appliances are not intended to be operated by means of an external timer or separate remote-control system.
6. The connector (thermostat) must be removed before the appliance is cleaned.
7. The appliance inlet must be dried before the appliance is used again.
8. Only the appropriate provided connector must be used.
9. Accessible surfaces may be high when the appliance is operating.
10. Surfaces are liable to get hot during use.
11. The heating element surface is subject to residual heat after use.
    12.If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
12. To avoid the risk of electric shock, do not immerse the electrical parts and plug in water or other liquids.
13. The appliance is for household use only. Do not use outdoors.
14. Use the appliance according to this instruction, any misuse may cause electric shock or other hazards.

15. Details for cleaning surfaces in contact with food can be found in the following paragraphs.

16. : HOT SURFACE.

SAFETY PRECAUTIONS

• Before connecting the appliance to the mains supply, please check if the voltage indicated on the appliance corresponds with the main voltage in your home.
• Do not place the appliance on a hot surface.
• Place the appliance on a stable flat surface.
• Do not operate the appliance if damaged, after an appliance malfunctions or it has been damaged in any manner, return to the customer service department for repair.
• Do not allow the main cord to come into contact with the hot surface.
• Ensure that the mains lead does not overhang the worktop surface.
• Use the appliance out of children reach. Prevent them from pulling the main cord or knocking the appliance over.
• Close supervision is necessary when the appliance is near children.
• Make sure that the power switch is off before plug in.
• Care must be taken not to touch any hot surfaces, do not store or cover the appliance until it has fully cooled down.
• Before cleaning the appliance disconnect it from the power supply and wait until it was cooled down.
• Never immerse the appliance or power cord into water or any other liquid. Do not allow liquid to penetrate the electrical parts of the appliance.
• CAUTION: The temperature of accessible surfaces may be high when the appliance is operating.

DESCRIPTION

USING THE APPLIANCE

1. Remove all protective materials.

2. Wipe the plates with a damp cloth or sponge to remove dust. Wipe the dust with a soft cloth or paper towel.

3. Select a suitable location to install the device, ensuring enough free space with the wall to allow heat to dissipate without damaging closets or walls.

4. Make sure the thermostat is set to the "OFF" position. Insert it into the plancha so that the two pins in the socket are fully inserted.

5. Turn the thermostat knob clockwise. The red light comes on. When the temperature of the plates reaches the desired temperature, the light goes out. If the temperature wheel is on the "OFF" position, the plate will no longer heat up. Before the first use, it is recommended to apply a little oil or grease on the plate.

6. Important: The baking plate will become very hot. Be careful not to touch the baking plate with your hands by accident.

7. After use, unplug the appliance from the electrical outlet and let it cool to room temperature before cleaning.

8. Warning: Do not immerse the device in a liquid. It is forbidden to immerse the device and the thermostat into the water!

9. During cooking, the light may be on indicating that the appliance is heating up to maintain the desired temperature.

CLEANING AND MAINTENANCE

• After use, position the thermostat to "OFF" position, unplug the power cord from the wall socket and remove the connector from the plancha.
  NOTE: When removing the plug from the wall socket, be sure to grab the entire plug and do not pull the cord.
• Clean the plancha plate when it is warm with a soft, moist cloth or paper towel or a soft sponge.
• For dirt residue, once the plancha has cooled, clean the plate with a soft sponge, moistened with a non-abrasive kitchen cleaner and hot water.
• Once the cleaning is complete, dry with a soft cloth. Clean the plancha after each use.
• To clean the connector (thermostat), use a soft, moist paper cloth or towel. Never immerse the connector in water or any other liquid.
• The plancha is covered with a non-stick surface, so be careful when handling it.
• DO NOT use sharp metal utensils or knives to cut food on the surface of the plancha.
• DO NOT place the connector on the surface of the plancha at the risk of scratching or damaging it.
• DO NOT use a cleaning product, nylon or metal brush on the plancha's lining at the risk of scratching or damaging it.
• When moving the plancha, always hold it by the handles.
• DO NOT wash the plancha when the connector (thermostat) is connected.

PRODUCT SPECIFICATION

Item reference: CEPL51

Model: AN-152P

Voltage/Frequency: 220-240V~50-60Hz

Wattage: 2200W

Instruction manual version: V1

CORRECT DISPOSAL OF THIS PRODUCT

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it

responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Continental Edison

120-126 Quai de Bacalan

CS 11584

33000 Bordeaux

IMPORT BY:

A.M.C.

123, QUAI JULES GUESDE

94400 VITRY SUR SEINE France

Continental Edison