Kompressor 220824 - Compressor Güde - Free user manual and instructions

USER MANUAL Kompressor 220824 Güde

Translation of the original instructions

Cleaning / Maintenance

Starting-up the machine

Check valve inspection

. Use of extension cables of dierent length and cross-section and also of adapters and multiple sockets should be avoided. Check the cable and/or socket for damages before the appliance putting into operation. To avoid danger, a damaged mains supply pipe must be replaced by the manufacturer. Do not under any

• Read and understand the operating instructions before using the appliance. Abide by all the safety measures stated in the service manual. Act responsibly toward third parties. In case of any doubts about connection and operation refer please to our customer center Preserve all the documentation so that anyone who uses the compressor can consult this beforehand. Information on noise reduction A certain level of noise from this device is unavoida- ble. Carry out very noisy work during the permitted and specied times. Comply with any statutory rest periods and restrict the duration of work to what is necessary. For the protection of yourself and those around you, suitable hearing protection must be worn. Specied Conditions Of Use The compressor can only be used for the produc- tion of compressed air to be used at home and by handymen. – Respecting technical data and safety precautions. The compressed air produced by the compressor cannot not be used for pharmaceuti- cal, food or medical purposes or to ll the air bottles of scuba divers. ENGLISH Technical Data Compressor Art. No p. 5011
• 2 Service connection p. 230
• V~50Hz p. 230
• V~50Hz Motor output S3/60% p. 1
• ,1 kW p. 1
• ,5 kW Idle speed p. 2850
• min -1 min p. 2850

circumstances attempt any repair yourself. Never let the compressor come into contact with water or other liquids and never direct the jet of liquids sprayed by tools connected to the compressor towards the compressor: as the appliance is live, this could cause electrocution or short-circuits. Never use the appliance with bare feet or wet hands or feet. Never yank the power cable to disconnect the plug from the power outlet or to move the compressor.

Warning: the compressor may restart when power is

restored following a blackout. Compressed air is a potentially dangerous form of energy; always take great care when using the compressor and its accessories. This device is not intended for use by persons (inclu

ding children) with limited physical, sensory or mental capabilities or without the necessary lack experience or knowledge unless they are supervised by a person who is responsible for their safety or were instructed by that person in how to use the device. Children should be supervised to ensure that they do not play with the device. Always keep children and unauthorised persons out of reach of the appliance. Never use the compressor without being supervised. Never direct the jet of air towards persons, animals or your body. Never keep the air ow in body holes as that could lead to fatal injuries! Keep the work area free. When operating, the compressor must be placed on a stable surface. The compressor must be used in a vertical position only. Caution! The compressor may only be used with appropriate wheels and rubber bumps. Safety goggles should be worn when using the compressor in order to protect the eyes against any foreign bodies lifted by the jet of air. If possible, when using air-powered accessories, wear safety clothing. Always maintain a safety distance of at least 4 meters between the compressor and the work area. Caution! The pneumatic hose may lash you when the quick-acting coupling is opened! The pneumatic hose should be held by hand. Always use the handle to move the compressor. When using compressed air, you must know and comply with the safety precautions to be adopted for each type of application (ination, airpowered tools, painting, washing with water-based detergents only, clinching, etc.). When using compressed air, you must know and comply with the safety precautions to be adopted for each type of application (ination, airpowered tools, painting, washing with water-based detergents only, clinching, etc.). Caution! Never switch the compressor on or o using the plug. Pressure switch to be pressed at all times. Do not leave the compressor on over night as it could become a source of danger. At the end of your working day, switch the appliance o, release the air jet and unplug the compressor.

Warning: if the water that condenses is not drained,

it may corrode the receiver, reducing its capacity and impairing safety. As it is a contaminating product, condensate must be DISPOSED of in accordance with laws on protection of the environment and current legislation. Never leave the appliance exposed to adverse wea

ther conditions (rain, sun, fog, snow). If this compressor is used outdoors, always remember to stow it after use in a covered or closed place. Never use the compressor outdoors in rain or bad weather. Do not place ammable or nylon/fabric objects close to and/or on the compressor. Do not cover the air inlets on the compressor. The compressor must not be tted in a vehicle for in

dustrial purposes without an inspection by an expert! If the compressor is used for industrial purposes, it must be checked by an expert before putting into operation for the rst time. Such check must be ordered by the operator (under BetrSichV Section 17 No. 25 – operation safety regulation) Caution! When tted in automatic equipment, it is necessary to install appropriate alarm or warning devices in case of power outage or malfunction or compressor (e.g. feed line, etc.) failure. To guarantee perfect and reliable operation of the rotary and percussive pneumatic tools such as impact wrenches, staplers or nailers, etc., the compressed air must be supplied ltered - with oil via the lubricator or maintenance unit A ltered water separator should be used for var

The machine must not be used under any circum- stances if the machine or the safety devices are damaged. Use only original accessories and original spare parts. Never clean the machine and its components with solvents, ammable or toxic liquids. Us only a damp cloth making. Oil-free No need to add oil for operation Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insucient maintenance and care can lead to unforeseen acci

dents and injuries. If necessary, a list of spare parts can be found at www. guede.com. Disposal Disposal instructions are illustrated in the form of pictograms on the device or packaging. Description of the pictograms is given in „Identication“ chapter. Disposal of transport packaging Packaging protects the device against damage during transport. Packaging materials are usually selected according to their eect on environment and disposal methods and can therefore be recycled. Returning of the packaging back to circulation saves resources and costs for packaging disposal. Parts of the packaging (e.g. foil, styropor) may be dangerous for children. Risk of suocation! Keep these parts of the packaging out of reach of children and dispose as soon as possible. Warranty A warranty period of 12 months applies to com- mercial use and 24 months apply to private use and commences on the day of purchase of the device. Warranty applies exclusively to failures due to defec

tive material or workmanship. An original sale slip with indication of date of sale must be presented in case of claiming for the warranty rights. Warranty does not cover unprofessional use such as device overload, violent use, damage caused by nishing in any case. To select a suitable pneumatic tool, the tool air consumption and the compressor eective amount delivered must necessarily be considered. (Pneumatic tools and accessory equipment can be found at www.guede.com) Avoid using the device in bad weather conditions, particularly if there is a risk of lightning. Requirements for operating sta The operating sta must carefully read the Opera- tingInstructions before using the appliance. Qualication: Apart from the detailed instructions by aprofessional, no special qualication is necessary forappliance using. Minimum age: Persons over 16 years of age can only workon the appliance.An exception includes youngsters trained in order to reachknowledge under supervision of the trainer duringoccupational education. Training: Using the appliance only requires corre- spondingtraining by a professional or the Operating Instructions. Nospecial training is necessary. Emergency procedure Conduct a rst-aid procedure adequate to the injury and summon qualied medical attendance as quickly as possible. Protect the injured person from further harm and calm them down. For the sake of eventual accident, inaccordance with DIN13164, a workplace has to be ttedwith a rst-aid kit. It isessential to replace any usedmaterial in the rst-aid kitimmedia- tely after it has been used. If you seek help,state the following pieces ofinfor- mation:

3. Number of injured persons

Maintenance Before carrying out any work on the machine, disconnect the plug from the socket. Run the accessory connected dry until there is no more air in the receiver. Prior to every use, visually check the machine to rule out any defects, in particular on the power cable and the plug. Safety valve Functional check ENGLISH17

third party or foreign materials, failure to comply with operations and assembly manual, and normal wear and tear. Service Do you have any technical questions? Any claim? Do you need any spare parts or operating instructions? We will quickly help you and without needles bure- aucracy at our web pages at www.guede.com in the Servicing part. Please help us be able to help you. In order to identify your device in case of claim we need the serial No., product No. and year of production. All this data can be found on the type label. Please enter it here for future reference: Serial No.: Art. No: Year of production: Important information for the customer Please be sure to know that returning the product in or after the warranty period must be made in the original packaging. Symbols Read the Operating Instructions! Before carrying out any work on the machi- ne, disconnect the plug from the socket. Wear eye protective goggles ! Wear ear protectors! Protect against humidity Never expose tool to rain. Cable pulling / transport prohibited Warning/caution! Dangerous voltage Caution - hot surface! Warning, hot surfaces! Danger - automatic control (closed loop) Warning against thrown-o items Keep distance of persons! Observe to keep out of dangerous zone Any damaged or disposed electric or electronic devices must be delivered to appropriate collection centres. Protect against humidity This side up ENGLISH18

Failure removal Defect Causes Measure Compressor not starting after being switched on Pressure in the air jet exceeds the closing pressure Release the pressure in the air jet so that the pressure switch gets automatically switched on Defective supply Have the current supply checked by an authorised person Defective pressure switch Have the pressure switch replaced by an authorised person (Güde service centre) Worn carbons Replace the carbons After reaching the closed pressu

re, the compressor runs or bu96es for a short time and then switches o automatically Electric cable is too long or its cross section is too small Check the length and cross section of the electric cable Compressor running constantly Suction lter is very dirty Clean or replace the suction lter Pneumatic tools have high air consumption Check the pneumatic tool air consumption; seek an authorised compressed air dealer Leaking on the compressor Localise the leaking, contact the Güde service centre Compressed-air pipeline leaking Contact the Güde service centre Drain valve is open or missing Close or insert the drain valve Compressor gets started too often Too much condensate in the air jet Drain the condensate Compressor is overloaded Safety valve blowing o Pressure in the air jet exceeds the set cut-o pressure Have the pressure switch adjusted/ replaced by an authorised person (Güde service centre) Safety valve is defective Replace the safety valve or contact the Güde service centre Compressor getting warm too much Air supply is not sucient Make sure sucient air supply and outlet (minimum distance from wall is 40 cm) is provided Cooling ns on the cylinder (cylin