DSA 1220124 - Grinder Güde - Free user manual and instructions
Find the device manual for free DSA 1220124 Güde in PDF.
User questions about DSA 1220124 Güde
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Grinder in PDF format for free! Find your manual DSA 1220124 - Güde and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DSA 1220124 by Güde.
USER MANUAL DSA 1220124 Güde
Translation of the original instructions Delta sander
ENGLISH Please read the instructions carefully before starting the machine.
Press carefully the fuzzy side of sanding disc against the packaging pad, as firmly as possible.
| Delta sander DSA 12-201-24 | |
| Art. No 58802 | |
| Battery voltage 12 V | |
| No-load speed 10000 min | -1 |
| Orbital travel diameter 1,2 mm | |
| Dimensions of grinding plate 140 x 100 mm | |
| Weight without battery/Charging equipment | 0,8 kg |
| Recommended AmbientOperating Temperature | -18°C ... +40°C |
| Recommended battery types APA 12-20 | |
| Recommended battery types LGA 12-24 | |
| Noise details | |
| Sound pressure level \(L_{pA}\) | 80 dB(A) |
| Sound power level \(L_{WA}\) | 91 dB(A) |
| Measured according to EN 62841;Uncertainty K = 3 dB (A) | |
| Wear ear protectors! | |
| Vibration details | |
| Vibration total values (triaxial vector sum) determined according to EN 60745: | |
| Vibration emission value \(a_h\) | \(4,7\ m/s^2\) |
| Uncertainty K = 1,5 m/s2 | |
WARNING: The vibration emission level will vary because of the ways in which a power tool can be used and may increase above the level given in this information sheet. The vibration emission level may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. An accurate estimate of the vibratory load should also take into account the times when the tool is shut down or when it is running but not actually in use. This may significantly reduce the vibratory load over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns.
Read and understand the operating instructions before using the appliance. Familiarise with the
control elements and how to use the appliance properly. Abide by all the safety measures stated in the service manual. Act responsibly toward third parties.
The operator is responsible for accidents or risks to third parties.
Persons over 16 years of age can only work on the appliance. An exception includes youngsters trained in order to reach knowledge under supervision of the trainer during occupational education.
In case of any doubts about connection and operation refer please to our customer center
Specified Conditions Of Use
The sander can be used for sanding wood, plastics and metal. This machine is suitable only for dry sanding.
Do not use this product in any other way as stated for normal use. Not observing general regulations in force and instructions from this manual does not make the manufacturer liable for damages.
Emergency procedure
Conduct a first-aid procedure adequate to the injury and summon qualified medical attendance as quickly as possible. Protect the injured person from further harm and calm them down. If you seek help, state the following pieces of information: 1. Accident site, 2. Accident type, 3. Number of injured persons, 4. Injury type(s)
Symbols
WARNING / Caution!
Read the operating instructions to reduce the risk of injury.
Wear eye protective goggles! Wear ear protectors!
Wear a suitable dust protection mask.
Wear gloves!
Take the replaceable battery from the appliance before any extension, cleaning and servicing works.
Class III tool.
CE marking
Any damaged or disposed electric or electronic devices must be delivered to appropriate collection centres.
Volts
No-load speed
Direct Current
Battery
Protect the battery against heat and fire.
Protect the battery against water and moisture.
Protect the battery against temperatures above 40^
Li-Ion
Do not throw the batteries in household waste.
Deliver the batteries to a collection centre of old batteries where they will be recycled in an environmentally friendly way.
WARNING Read all safety warnings, instrc- s, illustrations and specifications provided with power tool. Failure to follow the warnings and uctions may result in electric shock, fire and/or bus injury.
Save all warnings and instructions for future reference.
Sander safety warnings
Wear ear protectors. Exposure to noise can cause hearing loss.
Use protective equipment. Always wear safety glasses when working with the machine. The use of protective clothing is recommended, such as dust mask, protective gloves, sturdy non-slip footwear and ear defenders.
The dust produced when using this tool may be harmful to health. Do not inhale the dust. Use a dust absorption system and wear a suitable dust protection mask. Remove deposited dust thoroughly, e.g. with a vacuum cleaner.
Do not machine any materials that present a danger to health (e.g. asbestos).
Electronics
In case of overload, the rotational speed is being reduced until machine stops. Please note that the machine will automatically accelerate back to its original operating speed if the load is removed from it.
Battery
Risk of fire! Risk of explosion!
Never use damaged, defective or deformed accumulators. Never open or damage the accumulator or let it fall on the ground.
Never charge the battery in an environment with acids and easily flammable materials.
Protect the battery against heat and fire. Battery to be used at the ambient temperatures between 10^ and +40^ only. Never put the battery on heaters and do not expose it to strong sunlight for a long time. After being subject to heavy load, let the battery cool down first.
Short circuit - do not bridge the accumulator contacts with metal parts.
The accumulator must be packaged (plastic bag, box) or accumulator contacts must be sealed up for accumulator disposal, transport or storage.
The Gude charger to be used only to charge the battery. There can be malfunction or fire if different chargers are used.
Vapours may leak out in case of unauthorised use or when using a damaged accumulator. Bring fresh air and seek medical advice if experiencing difficulties. Vapours may irritate the respiratory system.
Work instructions
Accumulators are supplied partially charged and must therefore be fully charged before being used for the first time.
- Charge the accumulator when the appliance is running slowly or stops.
- A li-ion battery may be charged at any time without any shortening of its life. Charging process interruption will not damage the accumulator.
- A li-ion battery is protected by the Electronic Cell Protection against deep discharge.
- A significantly shorter operating time of a charged battery means the battery life is over and the battery must be replaced.
Dispose of the batteries in an environmentally friendly manner.
Li-ion batteries are subject to the special disposal obligation. Have any defective batteries disposed of by a specialised shop. The battery must be taken out before the appliance is scrapped. Damaged batteries may harm the environment and your health if toxic vapours or liquids leak out of such batteries.
Therefore, never send a defective battery by post, etc. Please contact your local recycling centre.
Dispose of the batteries when discharged. We recommend applying an adhesive tape on the poles to protect them against short circuit. Never open the battery.
Maintenance
Take the replaceable battery from the appliance before any extension, cleaning and servicing works.
Repairs and works specified in these Instructions may only be performed by qualified authorised staff.
Use only original accessories and original spare parts.
Keep the device, in particular the air vents, clean at all times. Never spray water on the device body!
Do not clean the plastics with solvents, flammable or toxic fluids. For cleaning, use a damp cloth only.
Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insufficient maintenance and care can lead to unforeseen accidents and injuries.
If necessary, a list of spare parts can be found at www.guede.com.
\section*{Caracteristiques Techniques}
Translation of the EC-Declaration of Conformity
We, hereby declare the conception and construction of the below mentioned appliances correspond - at the type of construction being launched - to appropriate basic safety and hygienic requirements of EC Directives.
In case of any change to the appliance not discussed with us the Declaration expires.
