CEBL800B - Blender CONTINENTAL EDISON - Free user manual and instructions

Product Type	Blender
Brand	Continental Edison
Model	CEBL800B
Power	800 W
Voltage	220-240 V, 50/60 Hz
Carafe capacity	1.5 L (estimated)
Speeds	Variable (MIN to MAX) + 3 automatic modes
Automatic modes	Pulse (P), Crushed Ice, Smoothies
Carafe material	Glass
Safety	Safety lock of the lid and carafe
Cleaning	Removable parts washable with soapy water; wipe motor block with a damp cloth
Dimensions (approx.)	18 x 18 x 40 cm
Weight (approx.)	2.5 kg
Protection class	II
Included accessories	Carafe, lid with measuring cap, blade set
Maximum usage time	2 minutes, then rest 1 minute

Frequently Asked Questions - CEBL800B CONTINENTAL EDISON

How to use the pulse mode?

Turn the control knob to M then press the P button to pulse mix. Release to stop.

What to do if the blender does not start?

Check that the carafe is properly engaged (tab in the hole) and that the lid is securely locked (safety pin inserted). The appliance only operates if these safety features are active.

How to clean the blades?

Unplug the appliance. Remove the carafe and wash the blades carefully with soapy water as they are sharp. Rinse and dry before reassembling.

Can I blend hot liquids?

Yes, but with caution. Hot liquids can be ejected due to sudden boiling. Do not fill above the maximum level and use a moderate speed.

What is the maximum capacity of the carafe?

Do not exceed the maximum level line indicated on the carafe, corresponding to approximately 1.5 L.

How to use the smoothie mode?

Turn the knob to M, then press the smoothie button. The blender gradually accelerates to maximum and stops automatically after 2 minutes.

Can the blender crush ice?

Yes, use the Crushed Ice (Ice Crusher) mode. It operates in intermittent cycles to crush ice without overloading the motor.

What to do if the mode button flashes red?

Turn the control knob to OFF, then again to M to reset and be able to select a mode.

Can I use accessories not supplied?

No, using accessories not recommended by the manufacturer may cause fire, electric shock, or injury. Use only the parts supplied.

How to store the power cord?

Do not let the cord hang over the edge of a table or counter. Wrap it neatly under the appliance or store it in a drawer after use.

USER MANUAL CEBL800B CONTINENTAL EDISON

MISE AU REBUT APPROPRIÉE

Read the operating instructions carefully before putting the appliance into operation and keep the instructions for future reference.

• The appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
• Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
  Children shall not play with the appliance.
• Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning.
• Switch off the appliance and disconnect from supply before changing accessories or approaching parts that move in use.
• Use the appliance according to this instruction, any misuse may cause electric shock or other hazards.
• Care shall be taken when handing the sharp cutting blades, emptying the bowl and during cleaning.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• The appliance is for household use only. Do not use

outdoors.

• Never dip machine into any liquid and sharp edges. Do not use the appliance with wet hands. If the appliance is humid or wet, unplug it immediately.
• Keep your inger away from moving parts and itted tools. Never put your ingers etc in hinge mechanism.
• Use only original spare parts.
• In order to ensure your children's safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.
• Do not insert anything into the rotating hooks while the machine is working.
• Place the machine on a smooth, lat and stable working surface.
• Never pour the water more than the maximum water level.
• Wait unl the moving parts stop running before you remove the lid of machine.
• Be careful if hot liquid is poured into machine as it can be ejected out of the appliance due to a sudden steaming.
• About how to clean surfaces in contact with food, please refer to the section "CLEANING".

BEFORE CONNECTING TO POWER

• Before connecting to the power, recheck the type of supply and the mains voltage match with the details given on the rating label on the appliance.

• Using for the irst time, rip off all wrapping paper and plastic bags. Clean the fittings.

KNOWING YOUR BLENDER

1. Measured cup
2. Safety lock inserted pin of lid
3. Lid
4. Safety lock hole of jar
5. Jar
6. Blade set
7. Safety lock outlet of jar
8. Motor unit
9. Speed knob
   10.Mode button

CONTROLS SETTING

This blender has "Mode", "OFF", "Stepless Speed" controls.

Before plug in the appliance, please remember to switch to "OFF" position.

Once plug in the appliance, "P" mode button will be in red light lashing, it means the machine is ready for use now.

"OFF" SWITCH CONTROL

• This control is to stop the blender or reset the blender.

"MODE" SWITCH CONTROL

Switch the knob to "M" position, 3 mode control buttons will be illuminated. Choose one of them, others button light will be off.

Press the same button again, this button function will be canceled and all 3 buttons will be illuminated again.

Note: If there is no any operation 30 seconds after cancelling the function, the "P" mode button will be in red light flashing. If you want to continue using the mode function, you need to switch the knob back to "OFF" position, then select the "M" function again.

P "P" Mode-Pulse function

Press for blending, remove to stop.

“Crusher” Mode - Crusher function

Blender under this mode will automatically work: few seconds ON and OFF, and repeat the process for several times.

"Smoothies blending" Mode-Smoothies function

Blender under this mode will automatically work: the speed will increase to max speed gradually, the blender will stop after 2 minutes working.

"Stepless Speed" SWITCH CONTROL

The slowest speed, turn the control knob to "MIN" position.
The fastest speed, turn the control knob to "MAX" position.
- You can select the required speed between "MIN" and "MAX".

INSTRUCTIONS FOR USE

Step 1 (as Picture A):

• Insert the jar into the motor unit, make sure the safety lock outlet of jar is well inserted into the body hole.

Step 2:

• Wash fruit / vegetables and cut into small pieces - about 2 × 2 ~cm .
• Place the fruit / vegetables into jar and add desired level of water or liquid mixture into the Jar. Pay attention that the water cannot more than the maximum water level.

Step 3 (AS picture B):

• Turn the lid clockwise to screw and lock into the jar.
• Pay attention that Safety lock inserted pin of lid needs to insert into Safety lock hole of jar well. If not, the motor unit will not work.

Step 4:

• Fit the measured cup into the lid.
• Plug the appliance in and choose the speed base on your food request.
• Run the blender no more than 2 min and then rest at least 1 min before the second operation.
• Never open the lid when the blade is still rotating. For extra caution, you can unplug the appliance before removing the lid.
• To add liquid ingredients during processing, remove the measured cup from the lid and pour liquid through the opening on the lid.
• If the blender result is not satisfactory, switch off the appliance and stir the ingredients with a spatula.

CLEANING

• Before cleaning please remove the plug from the socket.
• Do not immerse the motor housing into water or any other liquid.
• Do not use any abrasive detergents.
• Please only use a damp to clean the outside of the housing.
• Components that have come into contact with food can be cleaned in soapy water.
• Allow the parts to dry thoroughly before reassembling the device.

TECHNICAL DATA

Item reference: CEBL800B

Model: CY-356

Rated voltage: 220-240V, 50/60Hz

Power consumpon: 800W

Protecon class: II

Lot #:amc052020

Correct Disposal of this product

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collecon systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Connential Edison

120-126 Quai de Bacalan

CS 11584

33000 Bordeaux

IMPORT BY :

A.M.C.

123, QUAI JULES GUESDE

94400 VITRY SUR SEINE

France

Continental Edison