IAN 327347 - Bike helmet CRIVIT - Free user manual and instructions

USER MANUAL IAN 327347 CRIVIT

4. LED on and off button

5. Size adjustment system

• This helmet should not be used by children for climbing or other activities where there is a risk of strangulation or of catching should the child get caught with the helmet.

• The helmet must fit snugly and the chin strap must be securely fastened.

• Do not push the helmet to the back of your neck as this means that your forehead is not protected.

• Do not wear any head cover under the helmet.

• Please ensure that air continues to circulate. GB43GB

• No modifications may be made to the helmet, its structure, or indivi- dual components.

• The helmet may not be painted and/or decorated with stickers or labels.

• The protective effect of the helmet can be seriously impaired by the effects of paints, stickers, cleaning fluids, or other solvents.

• The helmet should protect your head in the event of an impact. This protection is no longer provided even after a single impact (even if it is light). Therefore the helmet must be replaced immediately after an accident even if there is no visible damage.

• Never use solvents or scouring agents that contain petroleum to clean the helmet, either on the outside or the inside. Always use a detergent that is pH neutral and diluted with clear water; rub the article carefully with a soft cloth. Then wipe it dry with a lint-free cloth. The padding can be cleaned with a little soap and a soft brush.

• Only use original replacement parts for your helmet.

• The LED light is not a safety aid and on no account replaces the specific devices that are compulsory in accordance with traffic regulations.

• The lifespan of the article depends on its use. However the article must be replaced five years after the date of manufacture (version: 01/2017) at the latest.44 Warning notes for batteries

• Only use batteries from the same manufacturer and of the same type.

• Remove the battery if it is dead or if the product is not used for a long period. (See the disposal measures on page 50).

• Warning! Batteries may not be charged or reactivated by other means and may not be dismantled, thrown in the fire, or short- circuited.

• Always store the batteries out of the reach of children.

• Non-rechargeable batteries may not be recharged.

• Rechargeable batteries may only be charged with adult supervision.

• Rechargeable batteries must be removed from the article before they are charged.

• The terminal clamps may not be short-circuited. Danger!

• Please handle a damaged or dead battery with extreme care and dispose of it correctly, wearing gloves.

• If you come into contact with battery acid then wash the relevant area with water and soap. If battery acid gets in your eyes rinse it out using water and consult a doctor immediately!

• Cleaning and user-maintenance may not be carried out by children without supervision.

• Batteries may not be swallowed! GB45 Changing the battery CAUTION! Follow these instructions in order to avoid mechanical and electrical damage. Danger! The article contains a battery. If the battery stops working it can be changed.

1. Set the size adjustment system to a medium size. Pull the rotary

knob out of the size adjustment system and remove the small thread wheel.

2. Loosen the three screws under the rotary knob using a suitable

screwdriver (not included in the scope of delivery) (figure E). Remove the base and take the battery compartment out. Carefully remove the empty battery from the battery holder (figure F).

3. Exchange it for a new battery.

Note: Pay attention to the plus and minus poles on the battery and that it is inserted correctly. The battery must be fitted entirely inside the battery holder.

4. Replace the battery holder in the rotary knob. Replace the base

and tighten the three screws. Place the thread wheel on the rotary knob as shown. Please ensure that the three pins on the rotary knob are positioned in the slots on the thread wheel (figure G). Insert the rotary knob back on the size adjustment system. Important: When you insert the rotary knob please ensure that the size adjustment system is set to a medium size as it is not possible to re-attach the rotary knob otherwise (figure G). GB46 Switching the light on and off (figure A) Different light settings are available to you if you press on the on and off button (4): Press once: lights on Press twice: lights flash at the same time Press three times: lights flash alternately Press four times: lights off HeiQ

Pure dynamiq PURE Textile freshness Experience the feeling of lasting freshness through the power of silver, keeping you odour-free all day lang. ADAPTIVE Thermal control Feel good all over. The textile will cool you down when you’re hot, and keep you dry longer in cold weather. Cools and minimises perspiration. The helmet liner contains a biocide agent (PURE TF by HeiQ

) for an anti-bacterial, odour-inhibiting lining treatment. Active ingredient: silver adsorbed to silicon dioxide (nano). GB47 Selecting the helmet size

• Measure the size of your head and select the appropriate size. Try several helmets on before making your decision. The size is ideal if the skin on your temples moves with the article when you are wearing the helmet.

• Please ensure that the helmet does not move freely on your head, even without tightening the chin strap.

• The chin strap must be securely closed to ensure a secure fit. The fit is correct if it is difficult to insert your finger under the chin strap. However you must always be able to breathe, swallow, and turn your head comfortably.

• The helmet fits correctly if it is snug but still comfortable on your head. Do not push the helmet towards the back of your neck as this means that your forehead will not be protected (figure B).

• If the helmet is too big (it is loose and cannot be adjusted tightly enough) or too small (presses on your head, leaves your forehead free), please choose the next smallest or biggest size.

• If it is not possible to adjust the helmet correctly then you may not use it. Adjusting the chin strap (figure C) The general length of the chin strap can be adjusted with the loop. You may also use the strap divider clip to adjust the length of the chin strap. GB48 Please ensure that the strap divider does not bother you, the straps do not cover your ears, and the fastener does not rest on your chin. Adjusting the headband size (figure D) Use the continuously adjustable rotary knob to fit your helmet to your head circumference to ensure the optimum fit. Turn the knob to the right to make the helmet headband smaller and to the left to enlarge the headband. Maintenance and care Regular maintenance and care contribute to the safety and durability of the helmet.

• Always use a detergent that is pH neutral and diluted with clear water; rub the article carefully with a soft cloth. Then wipe it dry with a lint-free cloth. The padding can be cleaned with a little soap and a soft brush.

• The padding can be cleaned with a little soap and a soft brush. Inner pads

• Hand wash below 30 °C. 30 °C/86 °F

• Allow to dry at room temperature. GB49 Storage Store the helmet in a dry, well ventilated location at room tempera- ture when not in use. Avoid heat sources. Notes on disposal Dispose of the article and the packaging materials in accordance with current local regulations. Packaging materials such as foil bags are not suitable to be given to children. Keep the packaging materi- als out of the reach of children. Devices that are marked with this symbol may not be disposed of with domestic waste. You are obliged to dispose of used electrical and electronic devices separately. Please ask your local authority about the facilities for correct disposal. Remove the battery from the article before disposing of it. Disposal measures for batteries Please note: As batteries are hazardous waste they may not be disposed of with domestic waste by law. You can hand over used batteries to local authority collection points or at your retailer free of charge. Special collection containers are available there for this purpose. GB50 3 Years Warranty The product was produced with great care and under constant supervision. You receive a three-year warranty for this product from the date of purchase. Please retain your receipt. The warranty applies only to material and workmanship and does not apply to misuse or improper handling. Your statutory rights, espe- cially the warranty rights, are not affected by this warranty. With regard to complaints, please contact the following service hotline or contact us by e-mail. Our service employees will advise as to the subsequent procedure as quickly as possible. We will be personally available to discuss the situation with you. Any repairs under the warranty, statutory guarantees or through goodwill do not extend the warranty period. This also applies to replaced and repaired parts. Repairs after the warranty are subject to a charge. IAN: 277838 Service Great Britain Tel.: [phone] (£ 0.10/Min.) E-Mail: [e-mail] You can also find spare parts for your product at: www.delta-sport.com, category Service - Lidl Spare Parts Service GB5152