WGF2344 - Uncategorized Vevor - Free user manual and instructions

USER MANUAL WGF2344 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

FENCE POST ANCHOR GROUND SPIKE

MODEL: FX-3.5-24-8 FX-3.5-24-4 FX-3.5-24-6 FX-3.5-36-8 FX-3.5-36-4 WGB-3.7-24-4 WGB-3.7-24-6 WGF-2-34-2 WGF-2-34-4 UX-3.5-27-1 UX-3.5-27-4 We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.- 1 - FX-3.5-24-8 FX-3.5-24-4 FX-3.5-24-6 FX-3.5-36-8 FX-3.5-36-4

UX-3.5-27-1 UX-3.5-27-4 Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate www.vevor.com/support NEED HELP? CONTACT US! This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.

1. Keep children and pets away during assembly.

2. Please assemble the product in strict accordance with the instructions.

Incorrect assembly could be hazardous.

3. Separate and count all parts and hardware.

4. Prepare the following tool: Philips Head Screwdriver.

5. Follow the intended uses only.

Silver Steel 3.5” 27”- 3 - PART LIST When unpacking this product, ensure the parts listed below are included and carefully inspect for any damage that may have occurred during transit. Do not attempt to assemble or use the product if any part is missing or damaged. Model Accessory FX-3.5-24-8 M8×38 16pcs

/- 4 - INSTALLATION METHODS Place the post anchor in the desired position. Get a scrap piece of wood and insert it into the post base. Using a club hammer or heavy-duty sledgehammer (not included), hit the wood, driving the post into the ground. Measuring with a level gradually while hammering. Once the post is securely in the desired position, place your post and tighten the bolts to further prevent movement.- 5 - Snap the bracket into the wooden post and keep it perpendicular to the ground. Tap the bracket so that it goes deep into the ground until it is parallel to the ground. Drill out the pre-set holes and lock in the screws separately to complete the installation.- 6 - Attach the repair bracket to the post. Hammering anchor nails into the ground. Drill pre-set holes and drill in screws. Finish the installation.- 7 - Press into the soil and twist into the ground with provided insert rod. Clear a hole deep enough to accommodate the stake yes a smaller diameter than the stake shaft. Insert the stake and twist in with tightening rod. Fits standard 4”x4” post(3.5”×3.5” inner) - perfrect for most mailbox posts. Installation : No need for cement No dig option (for most soil types) . Includes tightening rod and 5 lag bolts (use two bolts on one side and three on the other).- 8 - Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Imported to AUS:SIHAO PTY LTD.1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA:Sanven Technology Ltd. Suite 250,9166 Anaheim Place,Rancho Cucamonga,CA91730 REP

Machine Translated by Google- 3 - STÜCKLISTE

Machine Translated by GoogleLISTADE