Maya - Chair Lionelo - Free user manual and instructions

USER MANUAL Maya Lionelo

High chair – up to 15kg, 6 – 36 months of age Seat inclination positions: 1, 2 Low chair – up to 25 kg Seat inclination position: 1, 2, 3

Dear customer! Should you have any remarks or quesons concerning the product, please do not hesitate to contact us: help@lionelo.com The product has been tested and complies with: EN 14988:2017+A1:2020, EN 17191:2021 standards. Producer: BrandLine Group Sp. z o. o. A. Kręglewskiego 1, 61-248 Poznań, Poland Warnings for high chair: IMPORTANT! READ

CAREFULLY AND KEEP FOR

FUTURE REFERENCE WARNING

• Never leave the child unaended.

• Always use the restraint system.

• Falling hazard: Prevent your child from climbing on the product.

• Do not use the product unless all components are correctly ed and adjusted.

Be aware of the risk of open re and other sources of strong heat in the vicinity of the product.

• Be aware of the risk of lng when your child can push its feet against a table or any other structure.

• Do not use the reclined cradle once your child can sit unaided.

• Do not use the product if any of its parts or elements is damaged or torn-out.

• Do not let your child get close when you assemble and disassemble this product.

The product is intended for children who can sit on their own. The product can be used by children aged 0.5 - 3 and with maximum weight of 15 kg.‑ 7 ‑

• Always use the crotch protecon, the child must always be secured on a high chair, in any posion. The tray cannot fully protect the child. Warnings for the child seat: IMPORTANT! READ

CAREFULLY AND KEEP FOR

FUTURE REFERENCE WARNING

• DO NOT place this product near a window as it can be used as a step by the child and cause the child to fall out of the window.

• Be aware of the risk of open res and other sources of strong heat in the vicinity of the product.

• DO NOT place this product near a window where cords from blinds or curtains could strangle a child.

• Product intended for children from three years.

• All assembly ngs should always be ghtened properly.

• Do not use the seang if any part is broken, torn or missing and use only spare parts approved by the manufacturer.

• Restraint system shall be removed when the product is used as a seang. Descripon (see: g. 1 and 2)

1. Seat with backrest

4. Chair legs connector

8. Plasc high chair pads

A. Seat with backrest B. Upper part of high chair legs (x4) C. Lower part of high chair legs (x4) D. High chair legs connector E. Two-layer tray F. Plasc crotch protecon G. Skids (x2) H. Footrest

I. Plasc low chair leg pads (x4)

J. Bolts (x8) K. Footrest screws (x4) L. Screwdriver How to install high chair (see g. 1, 2 and 3): Legs elements are marked (A, B, C, D), adjust upper (A) and lower (B) legs to one another, as in the paern: (A+A, B+B, C+C, D+D). a. Screw upper legs (B) in lower legs (C) in relevant marking of the high chair. b. Screw folded high chair legs (B and C) into holes on sides of the seat (A).

The chair legs connector (D) must be screwed with four bolts (J) into chair legs (B and C). d. Screw the footrest with screws (K) in the high chair legs connector (D). e. Place the plasc crotch protecon (F) in seat holes (A) unl you can hear a „click”. f. Rotate plasc pads (8) and adjust to the oor to increase stability of the high chair.

To provide your child with maximum safety, make sure all elements have been properly and securely ghtened. h. Hold side tray keys (10) by pulling them out. Insert the tray (E) in the seat holder (A), set one of two available posions of the tray (E).

The rst and second posion of seat inclinaon is intended for the funcon of the high chair. Warning! The high chair can be used by a child aged up to 3, whose weight does not exceed 15 kg and who can sit on its own! 3-stage seat inclinaon adjustment (A) (see g. 4 and 1), how to fasten and undo safety belts (see g. 5).

• Press the adjustment keys (2) on both sides of the seat and set one of three posions‑ 9 ‑

which best suits your child.

• Put the child in, insert right and le part of the hip belt in the central buckle unl you can hear a „click” and fasten safety belts.

• To undo safety belts, press the central key and take belts out of the central buckle. Installaon of a low chair (see gures 6 and 2)

• Remove the lower legs (C) of the high chair. Aach the plasc caps of the low chair (I), screw the four screws (J) into the upper legs (B) of the chair and check that they are securely xed.

• The rst, second and third reclining posions of the seat are responsible for the low chair funcon. An addional opon is the low chair with skids (not included in the basic set) (see gures 7, 1 and 2):

• Remove the four screws (J) from the upper legs (B) of the chair and remove the plasc caps of the low chair (I).

Then adjust the skids (G) and screw the four screws into the upper legs of the chair (C). Using the seat adjustment buon (2), select one of three possible seat reclining posions. Warning! The reclined cradle can be used by a child whose weight does not exceed 9 kg and who cannot sit on its own! Cleaning and storage:

• Do not expose the chair to sunlight for a long me.

• Cushions must not be cleaned chemically or ironed. Machine wash at 30ºC.

• For cleaning, use so cleaning agents.

• Frequently check the chair for damage and loose elements.

• Wipe the seat with a wet cloth.

• Do not use abrasive agents.

• In case of any dirt on the top tray, you can wash it in the dishwasher.

• Stop using the chair aer you have idened any damage. Illustraons are for informaonal purposes only. The actual appearance of the products may dier from the pictures.‑ 10 ‑

REFERENTIE WAARSCHUWING