Monument - Fireplace Blumfeldt - Free user manual and instructions

USER MANUAL Monument Blumfeldt

Abstract green circular logo with three curved segments (no text or symbols)

Abstract green circular logo with two leaf-like shapes (no text or symbols)

Abstract green circular logo with three leaf-like shapes forming a Y-shape (no text or symbols)

QR code image containing encoded data, no visible human-readable text

Unit 6 Riverside Business Centre

Brighton Road

Shoreham-by-Sea

BN43 6RE

United Kingdom

English 7

Français 11

Español 15

Italiano 19

SICHERHEITSHINWEISE

WARNUNG

Line drawing of a simple rectangular frame with a recessed top and side supports (no text or symbols)

A
Untere Ablage

B
Mittelwand

Simple line drawing of a 3D rectangular prism with a vertical cutout on the side (no text or symbols)

C
Gehäuse

D
Kamin

E
Untere Platte

F
Rost

ZUSAMMENBAU

Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damages. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.

QR code image containing encoded data, no visible human-readable text

MANUFACTURER & IMPORTER (UK)

Manufacturer:

Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.

Importer for Great Britain:

Chal-Tec UK limited

Unit 6 Riverside Business Centre

Brighton Road

Shoreham-by-Sea

BN43 6RE

United Kingdom

SAFETY INSTRUCTIONS

WARNING

Risk of suffocation! This fi re pit is for outdoor use only and shall not be used in a building, garage or any other enclosed area.

Toxic carbon monoxide fumes can accumulate and cause asphyxiation.

• This fi re pit is not for commercial use.
• This fire pit should only be used by adults and all children and pets should be kept at a safe distance.
• Do not use petrol, white spirit, lighter fluid, alcohol or other similar chemicals to light a fire as a rapid increase in temperature could damage the fire pit. This fire pit is only suitable for use with charcoal, untreated wood or dry logs. Do not use coal.
• Do not use this fire pit until it is completely assembled and all parts are securely fastened and tightened.
• Do not use the fire pit on decking or any other flammable surfaces such as dry grass, wood chips, leaves.
• Always empty this fire pit after use. Leave a thin layer of ash to protect the bottom. Do not remove ashes or charcoal until they are completely and fully extinguished.
• Do not touch the fire pit until it is completely cooled unless you are wearing heat resistant gloves as it is hot when in use.
• Do not handle or move the fire pit when in use as it is hot.

• Do not attempt to store the fire pit until all ashes and charcoals are completely extinguished.

• Always use a safety tool and heat resistant gloves when adding or moving fuel.

• Do not leave a burning fire unattended.
• Fire hazard-Hot embers may emit while in use.
• Do not overload the fire pit with fuel. Do not add additional fuel until the fire burns down. If an portion of the fire bowl is growing red, it is overloaded.
• Do not burn fuel directly on the fire bowl base.
• Do keep the fuel away from the wall of the fire pit as the high temperature may damage it.
• Avoid breathing smoke from the fire and avoid getting it into your eyes.
  • Always thoroughly inspect the fire pit before use.
• A slight discolouration of finish may occur after use.

PARTS

Line drawing of a simple rectangular frame with a central opening and side supports (no text or symbols)

A
Bottom Wood Storage

B
Center Panel

C
Stove Body

D
Chimney

E
Bottom Panel

F
Grate

ASSEMBLY

1		2
Put Center Panel (B) between Bottom Storage (A) & Stove Body (C), fix with 4 x Screws (1) using a phillips screwdriver (not provided).	C	Put Chimney (D) above Stove Body (C), fix with 4 x Screws (1).

3		4
Slide the Bottom Panel (E) into the groove of the Bottom Storage (A).		Put Grate (F) into the Stove Body (C).

Lighting instructions

Place logs on the coal grid.

Note: Make sure that the wood lies centrally on the grille and does not reach to the edge of the grille. The wood should not be stacked too high.

Then place light, dry wood chips under the logs.

CLEANING AND CARE

CAUTION

Danger of burns! Allow the fi replace to cool completely before inspecting or cleaning it for damage.

Inspect the fi replace for damage

Check the fi replace regularly for damage to ensure product safety and a longer service life.

1. Check all parts to make sure they are tight.
2. Check the components for damage.
3. If you find damage to a component, have the fi replace repaired before continuing to use it.

Cleaning

• Make sure that the fi re is completely extinguished when you no longer use the fi replace.
• Make sure the fi re is completely extinguished and the fi replace has cooled down before removing the ashes.
• Use a damp cotton cloth to remove soot. Clean the fi replace regularly to ensure a long service life.

Note: The surface may discolour after repeated use.

• Do not use oven cleaner or scouring agents, as these can damage the product.
• Clean the outside with water and a mild dishwashing liquid.
• For stubborn stains, use a citrus-based cleaner and a nylon brush.

Chère cliente, cher client,

QR code image containing encoded data, no visible human-readable text

FABRICANT ET IMPORTATEUR (UK)

Fabricant :

Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Allemagne.

Unit 6 Riverside Business Centre

Brighton Road

Shoreham-by-Sea

BN43 6RE

United Kingdom

CONSIGNES DE SÉCURITÉ

MISE EN GARDE

Line drawing of a simple rectangular frame with a recessed top and side supports (no text or symbols)

Simple line drawing of a 3D rectangular prism with a vertical cutout on the front face (no text or symbols)

C
Boîtier

D
Cheminée

E
Panneau inférieur

F
Grille

ASSEMBLAGE

QR code image containing encoded data, no visible human-readable text

Unit 6 Riverside Business Centre

Brighton Road

Shoreham-by-Sea

BN43 6RE

United Kingdom

Line drawing of a simple rectangular frame with a recessed top and side supports (no text or symbols)

A
Base inferior

B
Panel central

Simple line drawing of a 3D rectangular prism with a vertical cutout on the side (no text or symbols)

C
Base superior

D
Chimenea

E
Placa inferior

F
Rejilla

MONTAJE

QR code image containing encoded data, no visible human-readable text

PRODUTTORE E IMPORTATORE (UK)

Produttore:

Chal-Tec GmbH, Wallstraße 16, 10179 Berlino, Germania.

Unit 6 Riverside Business Centre

Brighton Road

Shoreham-by-Sea

BN43 6RE

United Kingdom

AVVERTENZE DI SICUREZZA

ATTENZIONE

Line drawing of a simple rectangular frame with a recessed top and side supports (no text or symbols)

Simple line drawing of a 3D rectangular prism with a vertical cutout on the side (no text or symbols)

C
Alloggiamento

D
Comignolo