Avent SCF563 - Baby products PHILIPS - Free user manual and instructions

Product type	Growing bottle with teat
Brand	Philips Avent
Model	SCF563
Capacity	330 ml (11 oz)
Bottle material	Polypropylene (BPA-free)
Teat material	Silicone
Teat flow rate	Slow flow (for newborn) - variable flow depending on model
Recommended age	From birth
Anti-colic valve	Yes, integrated
Dimensions (H x W x D)	Approx. 19 x 7 x 7 cm
Weight	Approx. 90 g
Care	Dishwasher safe (top rack) or hand wash; sterilize by boiling or steam
Safety	Do not microwave; check temperature; replace teat every 3 months
Spare parts available	Teats, rings, caps, additional bottles
Compatible accessories	Philips Avent breast pump, storage pots, learning cups
Warranty	2 years (depending on country)
Country of origin	United Kingdom / China (depending on batch)

Frequently Asked Questions - Avent SCF563 PHILIPS

How to sterilize the Philips Avent SCF563 bottle?

You can sterilize the bottle by immersing it in boiling water for 5 minutes, or by using a Philips Avent sterilizer. Before first use, clean and sterilize all parts.

Which teats are compatible with the SCF563 bottle?

This bottle uses Philips Avent Classic+ teats. Available flow rates: newborn, slow, medium, fast and variable. Make sure to use a teat suitable for your baby's age.

Can the bottle go in the dishwasher?

Yes, the bottle and accessories are dishwasher safe. Place them on the top rack and avoid high temperatures. Food colorings may discolor the plastic.

How to prevent bottle leaks?

To prevent leaks, clean any residue around the bottle rim before assembly, and do not overtighten the sealing ring. Check that the teat is properly positioned.

Is the bottle BPA-free?

Yes, the Philips Avent SCF563 bottle is made of BPA-free polypropylene, ensuring your baby's safety.

How often to replace the teat?

It is recommended to replace the teat every 3 months for hygiene reasons. Inspect it before each use and discard if it shows signs of wear.

Can I store breast milk in this bottle?

Yes, breast milk can be stored in a sterilized Philips Avent bottle in the refrigerator (max 48h) or freezer (max 3 months). Never refreeze thawed milk.

How to warm the bottle?

Never heat the bottle in the microwave. Use a bottle warmer or immerse in hot water. Always check the milk temperature before feeding your baby.

Does the bottle work with the Philips Avent breast pump?

Yes, this bottle is compatible with Philips Avent breast pumps. You can express milk directly into the bottle to minimize transfers.

Where to buy spare parts?

You can purchase additional teats, rings, and bottles on the website shop.philips.com/service or from your Philips retailer. Contact Philips Consumer Service for more information.

USER MANUAL Avent SCF563 PHILIPS

Register your product and get support at www.philips.com/welcome

EN

For your child's safety and health WARNING!

• Always use this product with adult supervision.
• Never use feeding teats as a soother.
• Continuous and prolonged sipping of fluids will cause tooth decay.
• Always check food temperature before feeding.
• Heating in a microwave oven may produce localised high temperatures. Take extra care when you heat up drinks in a microwave.
• Keep all components not in use out of the reach of children.
• Do not allow children to play with small parts or walk/run while using bottles or cups.
• Do not place in a heated oven.
• To avoid scalding, allow hot liquids to cool before preparing the feeds.
• Drinks other than milk and water, such as fruit juices and flavoured sugary drinks are not recommended. If they are used, they should be well diluted and only used for limited periods, not constantly sipped.
• To ensure the bottle functions correctly and to prevent leakage, always make sure you: remove any debris or residue that may collect around the rim of the bottle before assembly, and avoid over-tightening the bottle screw ring when assembling it onto the bottle.
• Expressed breast milk can be stored in sterilised Philips

AVENT polypropylene bottles/containers in the refrigerator for up to 48 hours (not in the door) or the freezer for up to 3 months. Never refreeze breast milk or add fresh breast milk to already frozen milk.

Before first use

• Clean and sterilise the product.
• Place in boiling water for 5 minutes. This is to ensure hygiene.

Clean before each use

• Wash and rinse thoroughly, then sterilise using a Philips AVENT steriliser or boil for 5 minutes.
• Wash your hands thoroughly and ensure surfaces are clean before contact with sterilised components. Do not place components directly on surfaces that have been cleaned with antibacterial cleaning agents. Excessive concentration of cleaning agents may eventually cause plastic components to crack. Should this occur, replace immediately.
• Dishwasher safe - food colourings may discolour components.

Teats

• Inspect before each use and pull the feeding teat in all directions. Throw away at the first signs of damage or weakness.
• Make sure you use a teat with the correct flow rate when you feed your baby.

• For hygiene reasons, we recommend replacing teats after 3 months.

• Keep teats in a dry and covered container.

• Do not store a feeding teat in direct sunlight or heat, or leave in disinfectant (sterilising solution) for longer than recommended, as this may weaken the teat.
• Teats available in newborn, slow, medium, fast and variable flow rates. Only use Classic+ teats with Classic or Classic+ bottles.
• To buy accessories or spare parts, visit www.shop.philips.com/service or go to your Philips dealer. You can also contact the Philips Consumer Care Centre in your country.

Philips AVENT is here to help:

United Kingdom: 10800 338 04 89

Ireland: 08 18 21 01 41

DE

Philips AVENT breast milk container

Philips AVENT trainer kit

Philips AVENT Lern-Set

Philips Consumer Lifestyle BV

Tussendiepen 4, 9206 AD Drachten, Netherlands

Trademarks owned by the Philips Group.

© 2014 Koninklijke Philips N.V. All rights reserved