AVENT SCF818 - Baby products PHILIPS - Free user manual and instructions

Product Type	Microwave Steam Sterilizer
Model	AVENT SCF818
Brand	Philips
Capacity	Up to 4 bottles
Sterilization Time	Approximately 4 minutes
Sterilization Duration	Keeps sterile for up to 24 hours when lid remains closed
Power Source	Microwave oven (no electrical power required)
Material	BPA-free polypropylene
Dimensions (approx.)	26 × 26 × 12 cm
Weight (approx.)	0.5 kg
Compatible Accessories	Philips Avent bottles, nipples, pacifiers, breast pump parts
Cleaning & Maintenance	Wash with warm soapy water before first use; descale regularly with citric acid or vinegar
Safety Features	Microwave-safe, BPA-free, lockable lid to prevent steam burns
Spare Parts & Repairability	Replacement baskets and lids available; designed for easy assembly
Usage Instructions	Place bottles upside down in basket, add 200 ml water, microwave at full power for 4 minutes
Warranty	2 years (subject to region)

Frequently Asked Questions - AVENT SCF818 PHILIPS

How long does it take to sterilize bottles?

It takes approximately 4 minutes in a microwave oven at full power.

How many bottles can I sterilize at once?

You can sterilize up to 4 Philips Avent bottles at the same time.

Is the sterilizer safe for all microwave ovens?

Yes, it is designed for use in standard microwave ovens. Ensure the microwave has a rotating turntable for even sterilization.

Do I need to add water each time?

Yes, add 200 ml of tap water (or as indicated) to the base before each cycle.

How long do items stay sterile after the cycle?

Items remain sterile for up to 24 hours if the lid is kept closed.

Can I sterilize pacifiers and other accessories?

Yes, you can sterilize pacifiers, nipples, breast pump parts and other small accessories, as long as they are microwave-safe.

How do I clean the sterilizer?

Wash the base and basket with warm soapy water. For descaling, use a mixture of citric acid or vinegar and water every few weeks.

Is the material BPA-free?

Yes, the sterilizer is made from BPA-free polypropylene, ensuring safe sterilization.

Can I use this sterilizer without a microwave?

No, this model is specifically designed for microwave ovens only. It does not work with conventional ovens or stovetops.

What should I do if the sterilizer cracks?

Discontinue use immediately. Replacement parts such as the lid and basket are available through Philips spare parts centers.

USER MANUAL AVENT SCF818 PHILIPS

PHILIPS

AVENT

Philips Avent Anti-colic baby bottle

Philips Avent Milk Storage container

Philips Avent trainer cup

Philips Avent breast pump

Philips Avent breast pump

For your child's safety and health

Warning!

-Always use this product with adult supervision. - Never use feeding teats as a soother, to prevent choking hazard. -Continuous and prolonged sucking of fluids will cause tooth decay. -Always check food temperature before feeding. -It is not recommended to use a microwave to warm up your baby's food or drinks. Microwaves might alter the quality of food/drinks and destroy some valuable nutrients and it may produce localized high temperatures. Therefore, take extra care if and when you heat up food in a microwave. -When heating up liquid or food in the microwave, only place the container without screw ring, teat and cap. Always stir heated food to ensure even heat distribution and check the temperature before serving. -Keep all components not in use out of the reach of children. - Do not allow child to play with small parts or walk/run while using bottles or cups. -Do not place product in a heated oven. -Drinks other than milk and water, such as fruit juices and flavored sugary drinks, are not recommended. If used, they should be well diluted and only used for limited periods, not constantly sipped. -Expressed breast milk can be stored in sterilized Philips Avent bottles/containers in the refrigerator for up to 48 hours (not in the door) or in the freezer for up to 3 months. Never refreeze breast milk or add fresh breast milk to already frozen milk.

-Always discard any breast milk that is left over at the end of a feed.

- Do not use abrasive cleaning agents or anti-bacterial cleaners. Do not place components directly on surfaces that have been cleaned with anti-bacterial cleaners.

-Plastic material properties may be affected by sterilizing and high temperatures. This can affect the fit of the cap.

-Inspect before each use and pull the feeding teat in all directions. Throw away any part at the first signs of damage or weakness.

- Do not alter the product or parts of it in any way. This may result in unsafe functioning of the product.

Before first and every use

Disassemble all parts and clean them in warm soapy water, then rinse them thoroughly. Sterilize the parts in boiling water for 5 minutes or by using a Philips Avent sterilizer to ensure hygiene. During sterilization in boiling water, make sure the pan contains enough water and prevent the bottle or other parts from touching the side of the pan. This can cause irreversible product deformation, defect, or damage for which Philips cannot be held liable. Make sure you wash your hands thoroughly and that surfaces are clean before contact with sterilized parts. Place all bottle parts on a clean paper towel or on a clean drying rack and allow them to air dry. Excessive concentration of detergents may eventually cause plastic components to crack. Should this occur, replace immediately. This product is dishwasher safe – food colorings may discolor parts. Clean and sterilize all parts before each use. For hygiene reasons, we recommend replacing teats after 3 months.

Assembly

When you assemble the bottle, make sure you place the cap vertically onto the bottle so that the teat sits upright (see image for more details). The teat is easier to assemble if you wriggle it upwards instead of pulling it up in a straight line.

Maintenance teat

Do not leave a feeding teat in direct sunlight or heat, or leave in disinfectant ('sterilizing solution') for longer than recommended, as this may weaken the parts. Keep parts in a dry, covered container.

Choosing the right teat for your baby

The Philips Avent teats are separately available with different flow rates to help your baby with drinking. Over time you can change the teat to accommodate the individual needs of your baby. Philips Avent teats are clearly numbered on the side to indicate flow rate. Make sure you use a teat with the correct flow rate when you feed your baby. Use a lower flow rate if your baby chokes, is leaking milk, or has trouble adjusting to the drinking speed. Use a higher flow rate if your baby falls asleep during feeding, gets frustrated, or when feeding takes a very long time. These Philips Avent teats can be used on the Philips Avent feeding bottle and Philips Avent storage cups.

(1) The teat for 0m+ is ideal for newborn and breastfed babies of all ages. The number 1 is shown on the teat. (2) The teat for 1m+ is ideal for breastfed babies of all ages. The number 2 is shown on the teat. (3) The teat for 3m+ is ideal for bottle-fed babies at 3 months of age and up. The number 3 is shown on the teat. (4) The teat for 6m+ is ideal for bottle-fed babies at 6 months of age and up. The number 4 is shown on the teat.

(I/II/III) Variable flow: has a bite-resistant silicone teat. The sturdier teat, with an adjustable flow rate to the baby's convenience, is ideal for bottle-fed babies at 3 months of age and up. The teat has one slot cut on the top for fluid and the markings I, II, III on the edges of the teat.

(Y) Thick feed: The thick feed teat designed for thicker feeds is ideal for bottle fed babies at 6 months of age and up. The teat has one Y cut for fluid and the symbol Y on the teat.

Note: Every baby is unique and your baby's individual needs may vary from the description of flow rates.

Ordering accessories

To locate a retailer or purchase replacement bottle, teat or any Philips Avent baby product, visit our website at www.philips.com/avent.

Compatibility

Make sure to choose the correct teat corresponding to the correct screw ring of your bottle: teats from the Philips Anti-colic range only fit in screw rings of the Philips Anti-colic range, and Philips Natural teats only fit in Philips Natural screw rings. The high quality Philips Avent bottle is compatible with most Philips Avent breast pumps, spouts, sealing discs and cup tops.

Support

If you need information or support, please visit www.philips.com/support.