PDW700 - Camcorder SONY - Free user manual and instructions

USER MANUAL PDW700 SONY

OPERATION MANUAL French

1st Edition (Revised 6)

AVERTISSEMENT

Technical diagram of a digital camera with labeled parts 2 and 3

Technical diagram of a mechanical device with numbered parts labeled 1 through 7

7 Commande MIC (microphone) LEVEL

ALARM
Minimum Maximum

1 2 3 4 5 SDI IN (OPTION) GENLOCK IN TC IN TEST OUT TC OUT 6 7

1080/59.94i 1080/59.94i, 525/59.94i

1080/50i 1080/50i, 625/50i

1080/29.97P 1080/59.94i, 525/59.94i

1080/25P 1080/50i, 625/50i

1080/23.98P 1080/23.98PsF

720/59.94P 1080/59.94i, 525/59.94i

720/50P 1080/50i, 625/50i

Line drawing of a digital camera with control panel and buttons (no text or symbols)

Technical line drawing of a camera assembly with no visible text or symbols

Démontage du viseur

Technical line drawing of a mechanical device with directional arrows indicating movement or force (no text or symbols present)

Mechanical assembly diagram showing rotating components with no visible text or symbols

Mechanical component diagram showing a bracket with mounting holes and a separate dial (no text or symbols)

Technical line drawing of a mechanical assembly with no visible text or symbols

Line drawing showing a person holding a digital camera with an arrow indicating motion (no text or symbols)

Technical line drawing of a mechanical assembly with gears and shafts (no text or symbols)

FORMAT SETTING →COUNTRY :●NOT SELECTED SYSTEM LINE : 1080 SET FORMAT AND TURN OFF ONCE.

FORMAT SETTING ●COUNTRY :?NOT SELECTED SYSTEM LINE : 1080 SET FORMAT AND TURN OFF ONCE.

Technical diagram showing mechanical assembly with numbered components and directional arrows indicating motion or movement.

Technical diagram showing a mechanical assembly with numbered components and directional arrows indicating motion or movement.

Technical line drawing of a mechanical assembly with no visible text or symbols

Microphone

Technical line drawing of a mechanical assembly with hoses and components (no text or symbols)

Technical line drawing of a sewing machine with a sewing machine handle and spool (no text or symbols)

Technical line drawing of a mechanical assembly with no visible text or symbols

Line drawing of a professional video camera with attached cable, labeled WRR-862 (no text or symbols on the device itself)

Technical line drawing of a video camera with attached clamping device (no text or symbols)

Technical line drawing of a mechanical bracket assembly (no text or symbols)

Mechanical assembly diagram showing two stages of a valve or connector assembly (no text or symbols present)

Technical diagram of a vehicle air intake system with numbered components labeled 1 to 4

Simple geometric diagram showing a rectangle with an arrow pointing downward and a vertical line inside, no text or symbols present.

Technical line drawing of a mechanical device with no visible text or symbols

Mode ECS (Extended Clear Scan)

Line drawing of a professional video camera with labeled component (no text or symbols beyond label)

4 3 EXPAND HOLD RESET DISPLAY BRIGHT THUMENAIL CLIP NEKU F-UN SET N-HUN SUB CLIP SHIFT PINESET REGEN CLOCK LEVEL 0 10 0 AUTO MUSUAL AUDIO SELECT → CH-1 CH-2 AUDIO IN FRONT REAR WHOLET 2

SOIN SOIN GENLOCK TOIN TEST OUT 0.1 5

• Disque Blu-Ray
• Professional Disc for Data

Technical line drawing of a mechanical component with internal channels and a labeled SAVE button (no text or symbols beyond the label)

graph TD
    A["Device with two buttons"] --> B{Control Step 1}
    B --> C["Device with two buttons"]
    C --> D{Control Step 2}
    D --> E["Device with two buttons"]
    E --> F{Control Step 3}
    F --> G["Camera Mode with Camera Icon"]

Diagram of a digital camera with numbered parts labeled 1 through 6 for identification.

graph TD
    A["Plan 1"] --> B["RECSK START"]
    A --> C["RECSK STOP"]
    A --> D["RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK"]
    A --> E["Plan 2"]
    E --> F["RECSK STOP"]
    E --> G["RECSK STOP"]
    E --> H["RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSk"]
    E --> I["Plan 3"]
    I --> J["RECSK STOP"]
    I --> K["RECSK STOP"]
    I --> L["RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSK/RECSk"]

Remarques

graph TD
    A["Input Stage 1"] --> B["Process Step"]
    B --> C["Output Stage"]
    style A fill:#f9f,stroke:#333
    style C fill:#bbf,stroke:#333

graph LR
    A["Plan 1 Plan 2"] --> B["Plan 3"]
    B --> C["Nouveau plan"]

C0001.MXF TITLE00001

1 2 3 4 5 6 7 OUR 00:23:00:21 OUR 00:23:00:22 OUR 00:23:22:10 OUR 00:23:22:19 OUR 00:23:22:38 OUR 00:23:22:47 OUR 00:23:22:56 OUR 00:23:22:65 OUR 00:23:22:74 OUR 00:23:22:83 OUR 00:23:22:92 OUR 00:23:22:101 OUR 00:23:22:119 OUR 00:23:22:138 OUR 00:23:22:157 OUR 00:23:22:176 OUR 00:23:22:195 OUR 00:23:22:214 OUR 00:23:22:233 OUR 00:23:22:252 OUR 00:23:22:271 OUR 00:23:22:290 OUR 00:23:22:319 OUR 00:23:22:348 OUR 00:23:22:377 OUR 00:23:22:406 OUR 00:23:22:435 OUR 00:23:22:464 OUR 00:23:22:493 OUR 00:23:22:512 OUR 00:23:22:531 OUR 00:23:22:559 OUR 00:23:22:588 OUR 00:23:22:617 OUR 00:23:22:646 OUR 00:23:22:675 OUR 00:23:22:704 OUR 00:23:22:733 OUR 00:23:22:762 OUR 00:23:22:791 OUR 00:23:22:819 OUR 00:23:22:848 OUR 00:23:22:877 OUR 00:23:22:916 OUR 00:23:22:945 OUR 00:23:22:974 OUR 00:23:22:1053 OUR 00:23:22:1181 OUR 00:23:22:1319 OUR 00:23:22:1448 OUR 00:23:22:1587 OUR 00:23:22:1716 OUR 00:23:22:1845 OUR 00:23:22:1984 OUR 00:23:22:2113 OUR 00:23:22:2351 OUR 00:23:22:2599 OUR 00:23:22:2847 OUR 00:23:22:3185 OUR 00:23:22:3413 OUR 00:23:22:3661 OUR 00:23:22:3919 OUR 00:23:22:4167 OUR 00:23:22:4415 OUR 00:23:22:4673 OUR 00:23:22:4951 OUR 00:23:22:5199 OUR 00:23:22:5447 OUR 00:23:22:5785 OUR 00:23:22:6013 OUR 00: OUT OF US D-PR-5

1 Nom de plan

2 1 S OK TC 00:26:22:10 5 4

1 Image d'index

Clip List: E0001102/013 TC 00:00:00:00 TC 00:00:04:14 TC 00:00:12:04 TC 00:00:20:13 TC 00:00:28:08 TC 00:00:35:15 TC 00:00:46:08 TC 00:00:53:22 TC 00:00:59:16 TC 00:01:06:18 TC 00:01:13:11 TC 00:01:17:27 DATE:TIME 28 JUL 2006 19:55 TOTAL DUR 00:01:31:16 1 2 3 4 5 6

1 2 3 4 Shot Mark1 00/029 TC 00:23:02:00 TC 00:24:45:25 TC 00:25:07:01 TC 00:26:10:21 TC 00:26:22:11 TC 00:27:19:25 TC 00:27:51:25 TC 00:28:06:17 TC 00:28:35:00 TC 00:28:55:02 TC 00:29:10:05 TC 00:29:20:03 30 NOV 2006 19:55 Capping literally years of spe... 5 6

1 Nom du repère

Thumbnail Menu Clip Information Select Index Picture Clip Properties Add Sub Clips SHIFT+SET Delete Clip SHIFT+RESET Lock/Unlock Clip SHIFT+STOP Set Clip Flag Skip Scroll Thumbnail Search

Thumbnail Menu b)

Clip List:E0001 002/013 TC 00:00:00:00 TC 00:00:04:14 TC 00:00:12:04 TC 00:00:20:13 TC 00:00:26:08 TC 00:00:35:15 TC 00:00:46:08 TC 00:00:53:22 TC 00:00:59:16 TC 00:01:06:18 TC 00:01:13:11 TC 00:01:17:27 DATE&TIME 28 JUL 2006 19:55 TOTAL DUR 00:01:31:16 ① +② Disc Menu Load Clip List Save Clip List Save Clip List as... Delete Clip List Clear Clip List Load Planning Metadata/Select Drive Planning Metadata Properties Clear Planning Metadata Lock or Delete All Clips

Clip:"Navigating sibling relati..." 018/036 TC 00:29:19:23 TC 00:29:30:25 TC 00:29:50:04 TC 00:30:25:11 TC 00:30:40:13 TC 01:01:28:25 TC 00:09:43:14 TC 00:24:24:29 TC 00:21:34:27 TC 00:21:46:22 TC 00:25:48:08 TC 00:29:49:07 DATE&TIME 30 NOV 2005 14:14 DUR 0:23-22:26

Abstract grayscale image collage with a curved arrow pointing from a small inset image, no text or symbols present.

Grid of 16 grayscale images showing abstract human-like forms in various poses (no text or symbols)

Remarque

Delete Essence Mark Delete 002? OK Cancel

Select Essence Mark Shot Mark1 Shot Mark2 Rec Start Cut Others

Select Essence Mark Rec Start ShotMark0 "Kick off" "Touch Down" "Turn over" "timeout" "1Q" "2Q" "3Q" ✓

Clip:0010010/041 TC 00:23:00:29 TC 00:23:40:07 TC 00:26:45:11 TC 00:25:06:14 TC 00:25:49:23 TC 00:26:22:10 TC 00:27:19:04 TC 00:27:51:09 TC 00:28:30:09 TC 00:28:22:02 TC 00:23:34:18 TC 00:23:54:22 DATE&TIME:30 NOV 2005 13:40 DUR 0:00:04:14

Mountain range under cloudy sky, no visible text or symbols

Clip List:(no name) TC 00 00 00:00 TC 00:00:04:16 TC 00:00:12:04 TC 00:00:19:13 TC 00:00:28:08 TC 00:00:35:15 TC 00:00:44:28 New File* TOTAL DUR 0:00:52:15 001/007

Select Index:"Navigating sibling relati..." 018/036 TCR 01:09:16:13 OK Cancel

TC 00:01:36:00 Set Index Picture OK Cancel

• English [Royaume-Uni]
• English [Etats-Unis]
• French [France]
  • German [Allemagne]
• Italian [Italie]
  • Polish (Programmers) [Pologne]
• Russian [Russie]
• Spanish [Espagne]

Unlock Clip C0004 Unlock this Clip? OK Cancel

Add Sub Clip 017/035002 TC 00:30:25:11 TC 00:30:40:13 TC 01:01:26:25 TC 00:39:43:14 TC 00:24:24:28 TC 00:24:34:27 TC 00:24:46:22 TC 00:24:56:24 Scene Selection: TOTAL 00:13:48:24

Clip List (Add) 017/035002 TC 00:30:25:11 TC 00:30:40:13 TC 01:01:28:25 TC 00:09:43:14 TC 00:24:24:29 TC 00:24:34:27 TC 00:24:46:22 TC 00:24:56:24 Scene Selection TOTAL 00:13:48:24

006 Oil p001e0 (Move) TC 00:00:00:30 TC 00:01:21:27 TC 00:04:05:00 TC 00:04:13:14 TC 00:04:35:12 TC 00:04:57:10 TC 00:05:19:28 TC 00:05:41:05 TC 00:05:03:03 TC 00:06:25:00 TC 00:06:45:27 TC 00:07:09:25 DATE&TIME 08 AUG 2007 11:50 TOTAL OUR 00:13:48:24

Clip List (Trim) 001/034 Total 00:13:48:24 DLR 00:00:21:27 01:17:33:08 01:17:55:05 OK Cancel TCR 01:17:33:08 018/035

Delete Clip List E0001 Delete this Clip List? OK Cancel

Disc Properties User Disc ID 12345 Title1 One of the memories of sum... Title2 (none) Total DUR 01:23:45:00 Remain 031min Rewrite 1234times Horizontal Scroll

Disc Menu Load Planning Metadata/Select Drive Return to Upper Menu Professional Disc USB Flash Drive

Planning Metadata Properties File Name LatestNews0034 Assign ID Projections of world economic... Created 21 FEB 2008 09:14 +08.00 Modified 21 FEB 2008 09:14 +08.00 Modified by Guilleme Arduino Title1 Clips00006 Title2 (none) Material Op 008

User Defined Essence Marks 0 ShotMark0 1 "lock off" 2 "Touch Down" 3 "Turn over" 4 "Timeout" 5 "1Q" 6 "2Q" 7 "3Q" OK

Format Disc All Clips, Clip Lists and Non-AV Data (General Files) will be Deleted. Format OK? OK Cancel

XDCAM HD Status Device Information Hours Meter Software Version Div Disc Properties Thumbnails Maintenance Network Wi-Fi Certificate Account Software Update License Registration SONY Clip Properties Close HDMI installed in: 2019/02 byd 857.2mm/1000 LOW installed in: 117946 byd 857.2mm/1000 On HMI installed: 3489 byd 857.2mm/1000 Cio No.: 841916 Name: Count Title: TTL86645 Title: Hsquare_Twdring Air Format: MFC304D422 1000 inch Primary Area: 53,941 Web: 17-54,10,270(39,76,41) Created: 24 FEB 2409 15,166 +97,298 Modified: 25 FEB 2409 21,196 +97,298 Run Device: PDW-Vin (356-899,88) Aspect Ratio: 16.8 Back to Thumbnails

Planning Metadata File to send Browse... Execute Status SONY ProfessionalDisc © 2008 Sony Corporation

Upload Clips via Direct FTP Select Remote Host • Remote Host 1 • Remote Host 2 • Remote Host 3 • Remote Host 4(UPnP) Hosts Discovered via UPnP Network Config Cancel

Upload Clips via Direct FTP Connecting Status DNS Name Resolving ping - echo-back Open Remote Host FTP Login Change Directory Cancel

Upload Clips via Direct FTP Upload to PDW-HD1500-SN3009 Current Clip Clip 0/2 92.5MB Original C0002 Copy C0003 30% Total Clips Remain Time 15m JVs 16% Clip Abort: Immediately After this clip

Upload Clips via Direct FTP Uploading Result Report Uploaded: 3/3 Clips 0/0 ClipLists Not Uploaded: 0/3 Clips 0/0 ClipLists All Clips Uploaded Successfully. OK

Download Clip via Direct FTP Select Remote Host • Remote Host 1 • Remote Host 2 • Remote Host 3 • Remote Host 4(UPnP) Hosts Discovered via UPnP ■ UMD Unchange Network Contig Cancel ← ResetNext →

Technical line drawing of a camera module with adjustment arrows (no text or symbols)

Technical line drawing of a mechanical assembly with no visible text or symbols

TOP?005 REC FL CACHE/INTVAL REC: OFF DISC EXCHG CACHE: OFF CLIP CONT_REC: OFF LIVE LOGGING: OFF

(La figure illustre le menu du PDW-700.)

O TOP 005 REC FL →CACHE/INTVAL REC:● OFF DISC EXCHG CACHE: OFF CLIP CONT REC: OFF LIVE LOGGING: OFF

01.EDIT PAGE 02.EDIT USER 1 03.EDIT USER 2 04.EDIT USER 3 05.EDIT USER 4 06.EDIT USER 5 07.EDIT USER 6 08.EDIT USER 7 09.EDIT USER 8 10.EDIT USER 9 TOP?

Restrictions applicables aux connexions FAM

Restrictions applicables aux connexions FAM

Diagram of a professional video camera with numbered parts labeled 1 to 4

Technical diagram of a video camera with numbered parts for identification and assembly reference.

: 1 clignotement/sec.

Diagram showing three labeled points (1, 2, 3) connected by lines and a dashed circle inside a rectangle, likely illustrating a physics or engineering concept.

Technical line drawing of a mechanical component with dimension label (124(5))

269(10 5/8) 222(8 3/4) 332(13 1/8)

Type 2/3 pouce, 1920 (H) × 1080 (V)

Professional Disc PFD50DLA

Professional Disc PFD23A (capacité :

23,3 Go)

Pb/Pr : 37,088 MHz (59.94i), 37,125 MHz (50i/25P)

Quantification

8 bits/échantillon

Compression

MPEG-2 4:2:2P@HL50 Mbps

Support de microphone CAC-12

Insert Home Page Num / * Tab Q W E R T Y U I O P { } Enter Caps Lock A S D F G H J K L : @ ~ # Shift Z X C V B N M < > ? Shift Ctrl Alt Alt Gr Ctrl Insert Home Page Up Num Lock / * Delete End Page Down 7 Home 8 9 PgUp + 4 5 6 → ↑ 1 2 3 PgDn Enter ← ↓ → 0 Ins Del

~ 1 ! @ # $ % ^ & * ( ) = + ← 1 2 3 4 5 6 7 8 9 0 = = Tab ← Q W E R T Y U I O P { } / → Caps Lock A S D F G H J K L : " Enter Shift Z X C V B N M < > ? Shift ↑ ↑ Ctrl Alt Alt Ctrl Insert Home Page Up Num Lock / * - Delete End Page Down 7 Home 8 9 PgUp + 4 5 6 → End ↓ 3 PgDn Enter ← ↓ → 0 Ins Del

French [France]

2 1 & 2 é ~ 3 # 4 , ( 5 [ - ! 6 7 è 8 _ \ 9 ⬤ ∧ 0 à @ ) ] + = ) ← Tab ↩ A Z E € R T Y U I O P " ^ £ $ a Entrée ← Q S D F G H J K L M % ù μ * Shift > W X C V B N ? : / $ Shift ↑ Ctrl Alt Alt Gr Ctrl ← ↓ → 0 Inser Suppr Enter Inser ↘ ↑ Verr num / * - Suppr Fin ≡ 7 8 9 + 4 ← 5 6 → 1 Fin 2 ↓ 3 ≡ Entr

German [Allemagne]

° ! 2 $ 4 % 5 & 6 / ( [ ] = 0 ) ? B \ ← ^ 1 2 3 4 5 6 7 { 8 [ ] 0 ) Eing Pos1 Bild Num ÷ × - Tab ← Q W E R T Z U I O P Ü * Enter → @ € + - + A S D F G H J K L Ö Ä # Shift > Y X C V B N M : : Shift ↑ ↑ 2 3 ↓ Enter ◀ < ↓ → 0 Eing Entf

Italian [Italie]

i 1 2 £ 3 4 % 5 6 / 7 8 9 = 0 ? i ← Tab ← → Q W E € R T Y U I O P é [ ] + ) Enter Caps Lock A S D F G H J K L ò @ ° à # # Shift > < Z X C V B N M : : - Shift Ctrl Alt Alt Gr Ctrl Insert Home Page Up Num Lock / * - Delete End Page Down 7 Home 8 ↑ 9 PgUp + 4 ← 5 6 → ↑ 1 End 2 ↓ 3 PgDn Enter ← ↓ → 0 Ins Del

Polish (Programmers) [Pologne]

~ 1 @ 2

3

$ 4 % 5 ^ 6 & 7 * 8 ( ) 9 0 - + = ← Tab ← Q W E R T Y U I O P { } | → Caps Lock A S D F G H J K L : " Enter ← Shift Z X C V B N M < > ? ↑ Ctrl Alt Alt Ctrl Insert Home Page Up Num Lock / * - Delete End Page Down 7 Home 8 ↑ 9 PgUp + 4 5 6 → 1 End 2 ↓ 3 PgDn Enter ← ↓ → 0 Ins Del

Russian [Russie]

~ E ! 1 @ " 2 # Na $ ; % 4 ; % 5 ^ : & ? 6 7 * 8 ( ) 9 0 - + = ← Tab ← Q W E R T Y U I O P { } Enter → ↓ ↑ ↑ ↑ ↑ Caps Lock A S D F G H J K L : " ! / φ bl B A π P O Π Σ ; J 3 \ / Shift | Z X C V B N M < > ? Shift ↑ 1 2 3 ↓ ↓ / End ↓ PpDn Enter Ctrl Alt Alt Gr Ctrl Insert Home Page Up Num Lock / * - Delete End Page Down 7 Home 8 ↑ 9 PgUp + 4 5 6 → ← ↓ → Ins Del

Spanish [Espagne]

a 2 \ 1 ; " 2 @ 3 # $ 4 ~ % 5 & 6 ~ 7 / 8 ( ) = 9 ? i ← Tab ← Q W E R T Y U I O P ^ [ ] Enter → Bloq Mayús A S D F G H J K L N̄ ( ) Shift > Z X C V B N M : : - Shift ↑ Control Alt Alt Gr Control Insert Inicia Re Pág Bloq Num / * - Supr Fin AV Pág 7 Inicio 8 ↑ 9 Re Pág + 4 ← 5 6 → 1 Fin 2 ↓ 3 AV Pág Intro ← ↓ → 0 Ins Supr

~ 1 2 3 4 5 6 7 8 9 0 - = ← Tab ← Q → Q→ W→ E→ R→ T→ Y→ U→ I→ O→ P→ { } | W Caps Lock A → S → D → F → G → H → J → K → L → : " Enter ← Shift ↑ Z → X → C → V → B → N → M → < ? Shift ↑ Ctrl Alt 한자 한/명 Alt Ctrl Insert Home Page Up Num Lock / * - Delete End Page Down 7 Home 8 ↑ 9 PgUp + 4 ← 5 6 → 1 End 2 ↓ 3 PgDn Enter ← ↓ → 0 Ins Del

This software is based in part on the work of the Independent JPEG Group.

Copyright (c) 2000-2003 Intel Corporation All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

* Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
* Neither name of Intel Corporation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL INTEL OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

A propos de OpenSSL

OpenSSL License

/*
* Copyright (c) 1998-2008 The OpenSSL Project. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* 3. All advertising materials mentioning features or use of this
* software must display the following acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit. (http://www.openssl.org/)
*
* 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
* endorse or promote products derived from this software without
* prior written permission. For written permission, please contact
* [e-mail].
*
* 5. Products derived from this software may not be called "OpenSSL"
* nor may "OpenSSL" appear in their names without prior written
* permission of the OpenSSL Project.
*
* 6. Redistributions of any form whatsoever must retain the following
* acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit (http://www.openssl.org/)
*
* THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
* EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
* ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
*ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*

*

* This product includes cryptographic software written by Eric Young
* ([e-mail]). This product includes software written by Tim
* Hudson ([e-mail]).
*
*/

Original SSLeay License

/* Copyright (C) 1995-1998 Eric Young ([e-mail])

* All rights reserved.

*

* This package is an SSL implementation written

* by Eric Young ([e-mail]).

* The implementation was written so as to conform with Netscapes SSL.

*

* This library is free for commercial and non-commercial use as long as

* the following conditions are aheared to. The following conditions

* apply to all code found in this distribution, be it the RC4, RSA,

* lhash, DES, etc., code; not just the SSL code. The SSL documentation

* included with this distribution is covered by the same copyright terms

* except that the holder is Tim Hudson ([e-mail]).

*

* Copyright remains Eric Young's, and as such any Copyright notices in

* the code are not to be removed.

* If this package is used in a product, Eric Young should be given attribution

* as the author of the parts of the library used.

* This can be in the form of a textual message at program startup or

* in documentation (online or textual) provided with the package.

*

* Redistribution and use in source and binary forms, with or without

* modification, are permitted provided that the following conditions

* are met:

* 1. Redistributions of source code must retain the copyright

* notice, this list of conditions and the following disclaimer.

* 2. Redistributions in binary form must reproduce the above copyright

* notice, this list of conditions and the following disclaimer in the

* documentation and/or other materials provided with the distribution.

* 3. All advertising materials mentioning features or use of this software

* must display the following acknowledgement:

* "This product includes cryptographic software written by

* Eric Young ([e-mail])"

* The word 'cryptographic' can be left out if the rouines from the library

* being used are not cryptographic related :-).

* 4. If you include any Windows specific code (or a derivative thereof) from

* the apps directory (application code) you must include an acknowledgement:

* "This product includes software written by Tim Hudson ([e-mail])"

*

* THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND

* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* The licence and distribution terms for any publicly available version or
* derivative of this code cannot be changed. i.e. this code cannot simply be
* copied and put under another distribution licence
* [including the GNU Public Licence.]

Diagram of a device rear panel with labeled ports and internal components

Simple line drawing of a door with a handle and circular mark, no text or symbols present

Microphone, raccordement 49

Miniature

Mode ECS (Extended Clear Scan) 70