RI.086 - Pan Beper - Free user manual and instructions

USER MANUAL RI.086 Beper

Important Safety Instructions Always follow basic safety precautions when using electrical products, especially when children are present.

Warning: To avoid the risk of electrical shock, always make sure the products is unplugged from the

electrical outlet before relocating, servicing, or cleaning it.

READ AND SAVE ALL INSTRUCIONS

● This products is intended for indoor, non-commercial, household use for temporarily heating resi- dential rooms. Do not use the product for any other purpose. ● Do not leave the product unattended while it is in use. Always unplug the product from the electri- cal outlet when it is not use. ● Keep the product out of the reach of children and pets. This product is not intended for use by children. ● Do not use the product while sleeping or place near a person sleeping. ● Place the product on a at, steady, stable, heat-resistant surface. ● This product hasn’t any arcing or sparking parts inside. Do not use it in areas when gasoline, paint, or ammable liquids are used or stored, as there may be a risk of re or explosion. ●Use the product in a well-ventilated area. This heater is hot when in use. To avoid burns, do not let bare skin touch a hot surface. If provided, use handle when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, paper, clothes, and curtains at least 3 feet (0.9 meters) from all sides of the heater. ●Always maintain your distance from the product while it is in use to avoid serious burns and other personal injury. ●Use this heater only as described in this manual. Any other use not recommended by the manu- facturer may cause re, electric shock, or personal injury. ●Do not insert or allow other objects to enter any ventilation of or exhausted opening as this may cause an electric shock, re or product damage. ●To prevent a possible re, do not block air intake or exhaust in any manner. Do not use on soft surface, such as a bed, where openings may become blocked. ●Wipe the air openings clean if they become clogged. ●Do not use this product to dry or heater clothing, shoes, pipes or any other items. ●This heater is not intended for use in bathrooms, laundry areas, or other damp/wet locations. ●Never locate heater where it may fall into a bathtub or other water container. ●Plug the product into a standard AC230V electrical outlet. Do not allow the power cord to hang (e.g. over the edge of a table or counter) or place/run the power cord under rugs, carpeting, or in high-trafc areas where it may be tripped over or pulled. To disconnect the product, turn the switch off, and then remove the plug from the electrical outlet. Pull directly on the plug; do not pull on the power cord. Do not put any stress on the power cord where it connects to the product, as the power cord could fray and break. Do not plug or unplug the product from the electrical outlet with a wet hand. Keep the power cord and product away from heated surfaces Do operate any heater with a damaged cord or plug, after the heater malfunctions, or has been drop- ped or damaged in any manner. Return the product to a service facility for examination, electrical or mechanical adjustment, or repair.ENGLISH PTC Fan Heater Use instructions

11. Please check before you use:

A: The heating wire and electric wire can not be broken. B: Please do not uses the socket lower than 10A for fear of any accident.

12. Use the fan heater on the at place to avoid being toppled.

23. Power & turbo knob

●: “OFF“ : Cool air I: for low heat II: for high heat

4. There is a thermostat knob for adjusting heating. You can rotate the knob to get your desired

This unit has protection safeguards that shut off the unit when components become excessively hot or if it tips over. IF OVERHEATED If heater becomes overheated, it will shut down automatically and the heater will turn off. Please note that the red power light will go off and you smell a slight odor due to the coils overheating. This is normal and the odor will subside. Remove any nearby objects that may be causing overheat conditions. Keep at least three feet of space on all sides of the unit to allow adequate air circulation. Use the unit in a well-ventilated area. The unit will start automatically when it has cooled sufciently. Please note this cool-down period could take 30-45 minutes. When heater is cooled the red power light will come back on and the heater will begin to heat.

If the heater tips over, it will shut down automatically and the red power light will turn off. Place the unit on a at, smooth, stable surface in order to prevent it from tipping over again. Caution; Front of unit is hot. Handle with card, the unit will restart automatically.10 PTC Fan Heater Use instructions Maintenance:

1. Please make sure the plug should be put off before cleaning the heater.

2. Strictly prohibit to use water to wash the radiator, it can be cleaned by a piece of soft damp cloth

with a little neutral detergent. Please do not use other solvent like gasoline.

3. The fan heater must be used or stored after cooled and dried completely.

4. If stop using heater, please put off the plug from the socket, and store it in the dry place with a

rust-proof polybag, original packing is favored. TECHNICAL DATA Power: 1500W Power supply: 220-240V – 50Hz For any improvement reasons, Beper reserves the right to modify or improve the product without any notice.

DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), re- quires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the reco- very and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected.CONTACT YOUR DISTRIBUTOR IN YOUR COUNTRY OR AFTER SALES DEPARTMENT BEPER. E-MAIL [e-mail] WHICH WILL FORWARD YOUR ENQUIRIES TO YOUR DISTRIBUTOR. GUARANTEE CERTIFICATE This appliance has been checked in the factory. From the date of original purchase a 24 month guarantee applies to material and production defects. The purchase receipt and the guarantee cer- ticate must be submitted together in case of claim to guarantee. For any technical assistance, please contact directly the seller or our head ofce in order to preserve the appliance’s efciency and NOT TO void the guarantee. Any intervention on this appliance by non-authorized persons will automatically void the guarantee. Guarantee conditions If the appliance shows defects as a result of faulty material and/or production during the period of guarantee, we guarantee repair free of charge on condition that: - The appliance has been used properly and for the purpose for which it has been intended. - Repairs are professionally carried out by qualied persons who are appointed by the supplier. - The purchase receipt shall be presented. - The appliance showing a fair wear and tear shall not be covered by this guarantee. Therefore, any part that could be accidentally broken or having visible signs of use in consuma- ble products (such as lamps, batteries, heating elements…) is excluded from the guarantee, and any defect whatsoever resulting from non-respect of the rules for use, negligence in usage and/or maintenance of the appliance, damage during transport and any other damage not attributable the supplier. For every defect that could not be repaired within the guarantee period, the appliance will be repla- ced free of charge. Technical assistance Even after the guarantee period we will always pay attention to repairs for defected appliances. For technical assistance and/or repairs after the guarantee period you can directly contact the below address:Thermo-ventilateur céramique Manuel d’instructions

PRODUIT ET ACCESSOIRES