Cook Control 10200 EcoPower Inox - Kitchen scales CECOTEC - Free user manual and instructions

USER MANUAL Cook Control 10200 EcoPower Inox CECOTEC

1. Parts and components 15

4. Cleaning and maintenance 16

5. Technical specications 16

6. Disposal of old electrical appliances 16

7. Warranty and Technical Support Service 17

SAFETY INSTRUCTIONS Read these instructions thoroughly before using the appliance. Keep this instruction manual for future reference or new users. This device is for personal use only and is not intended for commercial purposes. Do not operate this appliance if there are any visible signs of damage. Always check for damage before each use and in case of malfunction, contact the Technical Support Service of Cecotec. Keep the device away from heat sources. Do not use the device outdoors. Static pressure is effective. Do not drop or strike the scale, it could damage easily. Avoid hitting or dropping the scale to prevent damages. Do not overload the scale or put heavy things on it. Do not immerse the product in water or any other liquid. Make sure the surface is always dry. Do not expose the device to wet and hot conditions in order to ensure its shelf life. Do not place or store the device in an upright position. Do not jump or stand on the device.

Take the device out of its package and remove all packaging materials. Check carefully if there is any damage, and if there is, immediately notify the Technical Support Service of Cecotec.

Place the scale on a at, stable surface. Rotate the power knob not less than 120º, the LCD display will show “0”. Place the food to be weighed on the scale (or in a bowl if required). The LCD will show the weight results. Fig. 2. Weighing units Select between g, oz, lb:oz or ml (for liquids). Fig. 3. Under weight mode, press the unit button to choose the unit. This button is located on the back of the scale. Note: Set the desired weighing unit before starting weighing. The unit cannot be changed during the weighing process. Tare function Place the container on the device’s platform. The LCD display will show the weight of the container. Press the tare function button to clear the weight of the container and reset to 0. Place the ingredients inside the container. The display will show the weight of the food only. The display will show negative values when the container and the food have been removed from the scale. To clear it, press the tare function button and the display will show “0” again. Fig. 4. Errors16 ENGLISH

COOK CONTROL 10200 ECOPOWER INOX

Fig. 5. The scale is overloaded. Do not place over 5 kg on the weighing platform. Fig. 6. Low battery. The device will automatically turn off after a few seconds. Please, rotate the power knob not less than 120º.

4. CLEANING AND MAINTENANCE

Use a soft, damp cloth to clean the surface. Do not use chemical or harsh abrasive cleaning agents. Do not store the device in an upright position.

5. TECHNICAL SPECIFICATIONS

Model: Cook Control 10200 EcoPower Inox Product reference: 04143 Features: High-precision strain gauge sensor system Capacity: 5-8 kg/1 g Units: g, oz, lb:oz, water-ml, milk-ml Automatic power generation control Battery-free technology Auto shut-off

6. DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), species that old household electrical appliances must not be disposed of with the normal unsorted municipal waste. Old appliances must be collected separately, in order to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation to dispose of the appliance correctly. If the product has a built-in battery or uses batteries, they should be removed from the appliance and disposed of appropriately. Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.17 ENGLISH

This product is under warranty for 2 years from the date of purchase, as long as the proof of purchase is submitted, the product is in perfect physical condition, and it has been given proper use, as explained in this instruction manual. The warranty will not cover the following situations: The product has been used for purposes other than those intended for it, misused, beaten, exposed to moisture, immersed in liquid or corrosive substances, as well as any other fault attributable to the customer. The product has been disassembled, modied, or repaired by persons, not authorised by the ofcial Technical Support Service of Cecotec. Faults deriving from the normal wear and tear of its parts, due to use. The warranty service covers every manufacturing defects of your appliance for 2 years, based on current legislation, except consumable parts. In the event of misuse, the warranty will not apply. If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact Cecotec Technical Support Service at [phone] 728.18 FRANÇAIS