Nest - Baby bed Phil & Teds - Free user manual and instructions

USER MANUAL Nest Phil & Teds

NOTE: Fabric is assembled to wire before wire is clipped into base

506-894-C Nest injection molded plastic base

PROJECT ref. Solid models of plastics supplied by Phil&Teds generally do not include draught and do not include shrinkage allowance. Dimensions highlighted on this drawing indicate areas requiring special attention. Phil&Teds must approve variations to the Phil&Teds supplied solid model. Any changes will be propagated to the solid model. Phil&Teds will then issue updated models and drawings, as these models must represent the final, as used, product. CAD GENERATED DRAWING, DO NOT MANUALLY UPDATESCALE:1:3SIZE:DRAWING No:SHEET 1 OF 1REV. DATE APPROVALS APPROVED

NOTE: Fabric is assembled to wire before wire is clipped into base

506-894-C Nest injection molded plastic base

PROJECT ref. Solid models of plastics supplied by Phil&Teds generally do not include draught and do not include shrinkage allowance. Dimensions highlighted on this drawing indicate areas requiring special attention. Phil&Teds must approve variations to the Phil&Teds supplied solid model. Any changes will be propagated to the solid model. Phil&Teds will then issue updated models and drawings, as these models must represent the final, as used, product. CAD GENERATED DRAWING, DO NOT MANUALLY UPDATESCALE:1:3SIZE:DRAWING No:SHEET 1 OF 1REV. DATE APPROVALS APPROVED

NOTE: Fabric is assembled to wire before wire is clipped into base

506-894-C Nest injection molded plastic base

PROJECT ref. Solid models of plastics supplied by Phil&Teds generally do not include draught and do not include shrinkage allowance. Dimensions highlighted on this drawing indicate areas requiring special attention. Phil&Teds must approve variations to the Phil&Teds supplied solid model. Any changes will be propagated to the solid model. Phil&Teds will then issue updated models and drawings, as these models must represent the final, as used, product. CAD GENERATED DRAWING, DO NOT MANUALLY UPDATESCALE:1:3SIZE:DRAWING No:SHEET 1 OF 1REV. DATE APPROVALS APPROVED

NOTE: Fabric is assembled to wire before wire is clipped into base

506-894-C Nest injection molded plastic base

PROJECT ref. Solid models of plastics supplied by Phil&Teds generally do not include draught and do not include shrinkage allowance. Dimensions highlighted on this drawing indicate areas requiring special attention. Phil&Teds must approve variations to the Phil&Teds supplied solid model. Any changes will be propagated to the solid model. Phil&Teds will then issue updated models and drawings, as these models must represent the final, as used, product. CAD GENERATED DRAWING, DO NOT MANUALLY UPDATESCALE:1:3SIZE:DRAWING No:SHEET 1 OF 1REV. DATE APPROVALS APPROVED

NOTE: Fabric is assembled to wire before wire is clipped into base

506-894-C Nest injection molded plastic base

PROJECT ref. Solid models of plastics supplied by Phil&Teds generally do not include draught and do not include shrinkage allowance. Dimensions highlighted on this drawing indicate areas requiring special attention. Phil&Teds must approve variations to the Phil&Teds supplied solid model. Any changes will be propagated to the solid model. Phil&Teds will then issue updated models and drawings, as these models must represent the final, as used, product. CAD GENERATED DRAWING, DO NOT MANUALLY UPDATESCALE:1:3SIZE:DRAWING No:SHEET 1 OF 1REV. DATE APPROVALS APPROVED

NOTE: Fabric is assembled to wire before wire is clipped into base

506-894-C Nest injection molded plastic base

PROJECT ref. Solid models of plastics supplied by Phil&Teds generally do not include draught and do not include shrinkage allowance. Dimensions highlighted on this drawing indicate areas requiring special attention. Phil&Teds must approve variations to the Phil&Teds supplied solid model. Any changes will be propagated to the solid model. Phil&Teds will then issue updated models and drawings, as these models must represent the final, as used, product. CAD GENERATED DRAWING, DO NOT MANUALLY UPDATESCALE:1:3SIZE:DRAWING No:SHEET 1 OF 1REV. DATE APPROVALS APPROVED

NOTE: Fabric is assembled to wire before wire is clipped into base

506-894-C Nest injection molded plastic base

PROJECT ref. Solid models of plastics supplied by Phil&Teds generally do not include draught and do not include shrinkage allowance. Dimensions highlighted on this drawing indicate areas requiring special attention. Phil&Teds must approve variations to the Phil&Teds supplied solid model. Any changes will be propagated to the solid model. Phil&Teds will then issue updated models and drawings, as these models must represent the final, as used, product. CAD GENERATED DRAWING, DO NOT MANUALLY UPDATESCALE:1:3SIZE:DRAWING No:SHEET 1 OF 1REV. DATE APPROVALS APPROVED

NOTE: Fabric is assembled to wire before wire is clipped into base

506-894-C Nest injection molded plastic base

PROJECT ref. Solid models of plastics supplied by Phil&Teds generally do not include draught and do not include shrinkage allowance. Dimensions highlighted on this drawing indicate areas requiring special attention. Phil&Teds must approve variations to the Phil&Teds supplied solid model. Any changes will be propagated to the solid model. Phil&Teds will then issue updated models and drawings, as these models must represent the final, as used, product. CAD GENERATED DRAWING, DO NOT MANUALLY UPDATESCALE:1:3SIZE:DRAWING No:SHEET 1 OF 1REV. DATE APPROVALS APPROVED

NOTE: Fabric is assembled to wire before wire is clipped into base

506-894-C Nest injection molded plastic base

PROJECT ref. Solid models of plastics supplied by Phil&Teds generally do not include draught and do not include shrinkage allowance. Dimensions highlighted on this drawing indicate areas requiring special attention. Phil&Teds must approve variations to the Phil&Teds supplied solid model. Any changes will be propagated to the solid model. Phil&Teds will then issue updated models and drawings, as these models must represent the final, as used, product. CAD GENERATED DRAWING, DO NOT MANUALLY UPDATESCALE:1:3SIZE:DRAWING No:SHEET 1 OF 1REV. DATE APPROVALS APPROVED

NOTE: Fabric is assembled to wire before wire is clipped into base

506-894-C Nest injection molded plastic base

PROJECT ref. Solid models of plastics supplied by Phil&Teds generally do not include draught and do not include shrinkage allowance. Dimensions highlighted on this drawing indicate areas requiring special attention. Phil&Teds must approve variations to the Phil&Teds supplied solid model. Any changes will be propagated to the solid model. Phil&Teds will then issue updated models and drawings, as these models must represent the final, as used, product. CAD GENERATED DRAWING, DO NOT MANUALLY UPDATESCALE:1:3SIZE:DRAWING No:SHEET 1 OF 1REV. DATE APPROVALS APPROVED

NOTE: Fabric is assembled to wire before wire is clipped into base

506-894-C Nest injection molded plastic base

PROJECT ref. Solid models of plastics supplied by Phil&Teds generally do not include draught and do not include shrinkage allowance. Dimensions highlighted on this drawing indicate areas requiring special attention. Phil&Teds must approve variations to the Phil&Teds supplied solid model. Any changes will be propagated to the solid model. Phil&Teds will then issue updated models and drawings, as these models must represent the final, as used, product. CAD GENERATED DRAWING, DO NOT MANUALLY UPDATESCALE:1:3SIZE:DRAWING No:SHEET 1 OF 1REV. DATE APPROVALS APPROVED

NOTE: Fabric is assembled to wire before wire is clipped into base

506-894-C Nest injection molded plastic base

PROJECT ref. Solid models of plastics supplied by Phil&Teds generally do not include draught and do not include shrinkage allowance. Dimensions highlighted on this drawing indicate areas requiring special attention. Phil&Teds must approve variations to the Phil&Teds supplied solid model. Any changes will be propagated to the solid model. Phil&Teds will then issue updated models and drawings, as these models must represent the final, as used, product. CAD GENERATED DRAWING, DO NOT MANUALLY UPDATESCALE:1:3SIZE:DRAWING No:SHEET 1 OF 1REV. DATE APPROVALS APPROVED

NOTE: Fabric is assembled to wire before wire is clipped into base

506-894-C Nest injection molded plastic base

PROJECT ref. Solid models of plastics supplied by Phil&Teds generally do not include draught and do not include shrinkage allowance. Dimensions highlighted on this drawing indicate areas requiring special attention. Phil&Teds must approve variations to the Phil&Teds supplied solid model. Any changes will be propagated to the solid model. Phil&Teds will then issue updated models and drawings, as these models must represent the final, as used, product. CAD GENERATED DRAWING, DO NOT MANUALLY UPDATESCALE:1:3SIZE:DRAWING No:SHEET 1 OF 1REV. DATE APPROVALS APPROVED

NOTE: Fabric is assembled to wire before wire is clipped into base

506-894-C Nest injection molded plastic base

PROJECT ref. Solid models of plastics supplied by Phil&Teds generally do not include draught and do not include shrinkage allowance. Dimensions highlighted on this drawing indicate areas requiring special attention. Phil&Teds must approve variations to the Phil&Teds supplied solid model. Any changes will be propagated to the solid model. Phil&Teds will then issue updated models and drawings, as these models must represent the final, as used, product. CAD GENERATED DRAWING, DO NOT MANUALLY UPDATESCALE:1:3SIZE:DRAWING No:SHEET 1 OF 1REV. DATE APPROVALS APPROVED

NOTE: Fabric is assembled to wire before wire is clipped into base

506-894-C Nest injection molded plastic base

PROJECT ref. Solid models of plastics supplied by Phil&Teds generally do not include draught and do not include shrinkage allowance. Dimensions highlighted on this drawing indicate areas requiring special attention. Phil&Teds must approve variations to the Phil&Teds supplied solid model. Any changes will be propagated to the solid model. Phil&Teds will then issue updated models and drawings, as these models must represent the final, as used, product. CAD GENERATED DRAWING, DO NOT MANUALLY UPDATESCALE:1:3SIZE:DRAWING No:SHEET 1 OF 1REV. DATE APPROVALS APPROVED

NOTE: Fabric is assembled to wire before wire is clipped into base

506-894-C Nest injection molded plastic base

PROJECT ref. Solid models of plastics supplied by Phil&Teds generally do not include draught and do not include shrinkage allowance. Dimensions highlighted on this drawing indicate areas requiring special attention. Phil&Teds must approve variations to the Phil&Teds supplied solid model. Any changes will be propagated to the solid model. Phil&Teds will then issue updated models and drawings, as these models must represent the final, as used, product. CAD GENERATED DRAWING, DO NOT MANUALLY UPDATESCALE:1:3SIZE:DRAWING No:SHEET 1 OF 1REV. DATE APPROVALS APPROVED

NOTE: Fabric is assembled to wire before wire is clipped into base

506-894-C Nest injection molded plastic base

PROJECT ref. Solid models of plastics supplied by Phil&Teds generally do not include draught and do not include shrinkage allowance. Dimensions highlighted on this drawing indicate areas requiring special attention. Phil&Teds must approve variations to the Phil&Teds supplied solid model. Any changes will be propagated to the solid model. Phil&Teds will then issue updated models and drawings, as these models must represent the final, as used, product. CAD GENERATED DRAWING, DO NOT MANUALLY UPDATESCALE:1:3SIZE:DRAWING No:SHEET 1 OF 1REV. DATE APPROVALS APPROVED

NOTE: Fabric is assembled to wire before wire is clipped into base

506-894-C Nest injection molded plastic base

PROJECT ref. Solid models of plastics supplied by Phil&Teds generally do not include draught and do not include shrinkage allowance. Dimensions highlighted on this drawing indicate areas requiring special attention. Phil&Teds must approve variations to the Phil&Teds supplied solid model. Any changes will be propagated to the solid model. Phil&Teds will then issue updated models and drawings, as these models must represent the final, as used, product. CAD GENERATED DRAWING, DO NOT MANUALLY UPDATESCALE:1:3SIZE:DRAWING No:SHEET 1 OF 1REV. DATE APPROVALS APPROVED

NOTE: Fabric is assembled to wire before wire is clipped into base

506-894-C Nest injection molded plastic base

PROJECT ref. Solid models of plastics supplied by Phil&Teds generally do not include draught and do not include shrinkage allowance. Dimensions highlighted on this drawing indicate areas requiring special attention. Phil&Teds must approve variations to the Phil&Teds supplied solid model. Any changes will be propagated to the solid model. Phil&Teds will then issue updated models and drawings, as these models must represent the final, as used, product. CAD GENERATED DRAWING, DO NOT MANUALLY UPDATESCALE:1:3SIZE:DRAWING No:SHEET 1 OF 1REV. DATE APPROVALS APPROVED

NOTE: Fabric is assembled to wire before wire is clipped into base

506-894-C Nest injection molded plastic base

PROJECT ref. Solid models of plastics supplied by Phil&Teds generally do not include draught and do not include shrinkage allowance. Dimensions highlighted on this drawing indicate areas requiring special attention. Phil&Teds must approve variations to the Phil&Teds supplied solid model. Any changes will be propagated to the solid model. Phil&Teds will then issue updated models and drawings, as these models must represent the final, as used, product. CAD GENERATED DRAWING, DO NOT MANUALLY UPDATESCALE:1:3SIZE:DRAWING No:SHEET 1 OF 1REV. DATE APPROVALS APPROVED

NOTE: Fabric is assembled to wire before wire is clipped into base

506-894-C Nest injection molded plastic base

PROJECT ref. Solid models of plastics supplied by Phil&Teds generally do not include draught and do not include shrinkage allowance. Dimensions highlighted on this drawing indicate areas requiring special attention. Phil&Teds must approve variations to the Phil&Teds supplied solid model. Any changes will be propagated to the solid model. Phil&Teds will then issue updated models and drawings, as these models must represent the final, as used, product. CAD GENERATED DRAWING, DO NOT MANUALLY UPDATESCALE:1:3SIZE:DRAWING No:SHEET 1 OF 1REV. DATE APPROVALS APPROVED

FUTURE REFERENCE. Read the instructions carefully before use and keep them for future reference. Your child’s safety may be affected if you do not follow these instructions.

The once over Check the product for cuts & bruises. If your product is damaged in any way, or you’re not sure how to use it, contact your retailer immediately. Caring for nest Unlike children, your nest likes to stay clean. Wipe the nest down with a damp sponge. • Do not submerse the nest in water. Let the nest air dry.• The nest mattress may be hand washed in warm water • with mild natural soap. Do not use any harsh soap, solvents, bleach or detergents • which may harm the nest’s materials. Do not wring. Dry your nest thoroughly before storage.• Store in a well ventilated space, away from direct sunlight • (which can harm and fade fabric), and moisture. Improper care will void any warranties. Do not use the nest • if deterioration is detected or suspected.

We want to give owners confidence in the quality of our products. They are fully warranted against defects in materials & workmanship for one year from the date of purchase. What is the warranty? If we determine that the product has a manufacturing fault we will repair it free of charge. If not practical to repair it we will, at our discretion, replace the faulty part in question*. What if it’s outside the warranty terms? If the product fails due to wear & tear, accident, neglect or negligence, or if it is outside the 1 year warranty period, we will happily repair it for a reasonable charge. Who do I contact? If your product is less than a year old and subject to a warranty claim please file one through the support section of the ` website: www.philandteds.com/support. If you are unsure if the product is subject to a warranty claim, or it is outside the one year warranty period, please consult our web support (www.philandteds.com/support) from where you can access a local customer care team. You will need to provide proof of purchase. They will inform you of the next step. Who is covered? The original purchaser buying product from an authorised dealer. Proof of purchase is required. What is covered? Workmanship or materials that are deemed faulty by `, providing the product has at all times been used in normal conditions, used in accordance with the instructions & been properly maintained. What is not covered? Second hand product; modified product; poorly maintained product; normal wear, fading & fabric cuts; improper use or care: (by way of example) abnormal use; not following instructions; excessive load; transport damage i.e. airline or freight damage. Customer costs within warranty The customer is responsible for any inwards freight charge to return product to a ` representative for warranty & or service. Customer costs outside warranty Where proof of purchase is not provided or product is outside of the one year warranty period, ` reserves the right to charge a service fee and/or charge for parts replaced/repaired. A return freight charge may apply. Exclusions Any consequential loss or damage to any person or property directly or indirectly as a result of using a ` product. WORLDWIDE COVERAGE: If you file a warranty claim outside of the country of purchase we reserve the right to charge freight and/or service fees.

Please register your product purchase through our online warranty registration by visiting: www.philandteds.com/register

WARNINGS! Always check that the base wire is clipped properly in • place before use. Always fully zip cover on or fully remove. Do not leave • partially zipped or it may fall over childs face. Never use nest on a stand.• WARNING Do not let other children play unattended near • the nest. Be aware of the risk of open fire and other sources of • strong heat such as electric bar fires, gas fires etc in the vacinity of the nest. Do not leave your child unattended.• WARNING This product is only suitable for a child who • cannot sit up unaided. Suffocation Hazard: Infant carrier can roll over on soft • surfaces and suffocate child. NEVER place the nest on beds sofas or other soft surfaces. Use only on a firm, horizontal level and dry surface.• NEVER use this nest as means to transport an infant in a • motor vehicle. Use only for one child weighing no more than 9kg.• To help prevent falls, do not use this product when the • infant begins to push up on hands and knees or has reached the recommended maximum weight. NEVER add a mattress, pillow, comforter or padding . Use • ONLY the pad provided by manufacturer. To reduce the risk of SIDS, paediatricians recommend • healthy infants be placed on their backs to sleep, unless otherwise advised by your physician. Strings can cause strangulation, do not suspend strings • over the Nest or attach strings to toys. Do not place items with a string around a childs neck such • as hood strings or pacifier cords. Use only replacement parts supplied by the manufacturer.• Check the handles and bottom of Nest regularly for signs of • damage and wear. Use only sheets provided by manufacturer or those • specifically designed to fit the dimensions of the Nest. WARNING Do not use if any part is broken, torn or missing.• Félicitations! Merci d’avoir choisi le nestProduct care / Conseils d’entretien / Produktpflege / Cuidado del producto / Productverzorging NEST