Cloe - Stroller Lionelo - Free user manual and instructions

USER MANUAL Cloe Lionelo

Should you have any remarks or questions concerning the product, please do not hesitate to contact us: [e-mail]

Producer:

BrandLine Group Sp. z o. o.

ul. A. Kriegewskiego 1, 61-248 Poznań, Poland

IMPORTANT - READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

WARNING!

1. Never leave the child unattended.
2. Ensure that all the locking devices are engaged before use.
3. To avoid injury ensure that the child is kept away when unfolding and folding this product.
4. Do not let the child play with this product.
5. This seat unit is not suitable for children under 6 months.
6. Always use the restraint system.
7. Check that the pram body or seat unit or car seat attachment devices are correctly engaged before use.
8. This product is not suitable for running or skating.
9. The product is suitable for a child weighing up to 22kg or up to 4 years (whichever comes first).
10. If you want to take the baby out of the stroller, or put it in it, make sure the locking mechanism is locked.
11. The maximum allowable load of the basket is 3kg
12. Any load attached to the handle and / or the back of the backrest and / or the sides of the product will affect the stability of the stroller.
13. Only one child can use the product at a time.

14. Do not use accessories that have not been approved by the manufacturer.

15. Use only spare parts supplied or recommended by the manufacturer.

16. Do not use the product on stairs.

List of parts (fig. A)

1. Handle
2. Locking mechanism
3. Headband
4. Footrest
5. Harness
6. Canopy
7. Basket

Unfolding the stroller

Note! Be careful when unfolding the stroller. Risk of finger pinching.

1. To unfold the stroller, grasp the handle (1, fig. A), then dynamically pull the handle upward. The stroller will unfold on its own (fig. 1). The correct unfolding of the stroller will signal a click on both sides of the stroller.
2. Fold or unfold the canopy (2, fig. 1) as preferred.

Installation and removal of front wheels

1. Insert the front wheel stem into the corresponding holes in the frame of the stroller (fig. 2).
2. To remove the wheels, press the button (A, fig. 3) and pull them out of the stroller frame.

Installation and removal of the headband

1. Insert the headband into the appropriate holes on the stroller frame (fig. 4). Correct installation will signal a click.
2. Press both release buttons (A, fig. 5), then pull out the headband.

Footrest adjustment

Pull the handle located under the footrest, then adjust the footrest to one of the two available positions (fig. 6).

Seat adjustment

Note! Do not adjust the seat when there is a child in the stroller.

1. To unfold the seat to the reclining position, pull the lever on the back of the seat (fig. 7).
2. To return to a sitting or semi-reclining position, push the seat forward until you hear a distinctive click.

Locking mechanism

Note! Use the locking mechanism only as intended. Incorrect use may result in permanent damage to the product.

1. To lock the front and rear wheels, push in the locking mechanism marked in red, located on the right side of the frame (fig. 8).
2. To unlock, press the locking mechanism marked in green, located on the left side of the frame.

The locking mechanism system used requires alternate operation. Follow the intuitive signage: red - stop, green - go.

Harness

1. Combine the upper and lower parts of the clasp (fig. 9a, 9b), and put the whole into the main buckle (fig. 10). A correct connection will signal a click.
2. Adjust the length of the straps to the child's body using the buckles located on the straps (A, fig. 10).
3. To unbuckle the belts, press the button located in the main buckle (B, fig. 10).

Harness adjustment

To adjust the straps, remove the buckle through the hole located in the seat and put it in the desired place (fig. 11).

Make sure that the buckles are in the correct, stable position after repositioning (fig. 12).

Folding the stroller

1. To fold the stroller, press button A and button B at the same time (fig. 13), then push the handle forward (fig. 14). The stroller will fold automatically (fig. 15).
2. Press down on the stroller to make sure it is folded correctly.

Cleaning and maintenance

• The cover and basket can be hand-washed at 30^ C .

• Clean the frame of the stroller with a damp cloth and mild cleaning agents.

• Regularly check the condition of the stroller and wheels. Do not use accessories that are not included. Use only original spare parts.
• Do not expose the stroller to direct sunlight for too long.
• Do not expose the stroller to salt water, as this can cause rust

Photos are for reference only, the actual appearance of the products may differ from that shown in the photos.

PL

Drogi Kliencie!

BrandLine Group Sp. z o.o.

BrandLine Group Sp. z o.o.

A. Krieglewskiego 1, 61-248 Poznań, Polonia

IMPORTANTE - LEGGERE ATTENTAMENTE E CONSERVARE PER FUTURO RIFERIMENTO ATTENZIONE!

BrandLine Group Sp. z o.o.

BrandLine Group Sp. z o.o.

BrandLine Group Sp. z o.o.

ul. A. Kriegewskiego 1, 61-248 Poznané, Lenkija

SVARBU - ATIDžIAI PERSKAITYKITE IR SAUGOKITE, KAD VÉLIAU GALÉTUMÉTE PASISKAITYTI ISPEJIMAS!

BrandLine Group Sp. z o.o.

BrandLine Group Sp. z o.o.

Detailed warranty conditions are available on the website: