10029297 - Kettle Klarstein - Free user manual and instructions

Frequently Asked Questions - 10029297 Klarstein

USER MANUAL 10029297 Klarstein

Congratulations on purchasing this equipment. Please read this manual carefully and take care of the following hints to avoid damages. Any failure caused by ignoring the mentioned items and cautions mentioned in the instruction manual are not covered by our warranty and any liability.

Technical Data

Item number 10029297
Power supply 220-240 V ~ 50-60 Hz
Power consumption 2200W

Safety Instructions

• Read all instruction carefully and thoroughly before any operation of the kettle.
• Close supervision is necessary when any appliance is used by or near children.
• Before connecting the kettle-check whether the voltage indicated on the appliance (underside of kettle and base unit) corresponds with the mains voltage in your home. If this is not the case contact your dealer and not use the kettle.
• Switch off and unplug from the outlet before filling-emptying or cleaning or when not in use.
• Do not overfill as boiling water may be ejected the maximum level indicator.
• Fill with cold water only.
• To avoid against fire do not operated in the presence of explosive and/or flammable fumes.
• Do not let the cord hang over the edge of a table or a counter. Do not let the cord touch hot surface.
• Never yank on the cord as this may damage the cord and eventually cause a risk of electric shock.
• If the cord or plug is damaged or after the appliance malfunctions or is dropped or damaged in any way. Return the appliance completely to your nearest authorized service agent for examination, repair or adjustment.
• Avoid touching the surface of the hot kettle-use the handle and knobs.
• To avoid possible steam damage not face the spout when operating the kettle.
• If operated on wood furniture-use a protective pad to prevent damage to delicate finishes.
• To avoid scalding always ensure the lid is correctly positioned before operation.
• Scalding may occur if the lid is removed while heating. Remove and replace the lid carefully when hot.
• Extreme caution must be used when moving the kettle containing hot water. Never lift the kettle by its lid. Always use the body handle.
• Do not switch your kettle on if it is empty.
• To protect from electrical hazard, do not immerse this kettle-power base or cord set in any liquid.
• Use the kettle only with the supplied base unit. Do not use the base unit for other purposes.
• Avoid the liquid sprinkling in the LCD board and the pressed key place in the operating process. Because the water possibly can plunge in the product, causes the function to be unusual.
• Do not have to add surpasses the maximum water volume the water, because this has the possibility to damage the product, causes the product movement to appear exceptionally.
• This appliance should not be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have are supervised by the person who is responsible for their safety.
  Children should be supervised to ensure that they do not play with the appliance

Use and Operation

Before first Use

1. Before first use-fill the kettle with clean water to maximum capacity and boil. Discard the water and repeat the process. The kettle should always be unplugged when filling or adding water.
2. Fill the kettle with water to desired level. Do not overfill or there will be a risk of spillage or spitting. The water level indicator will assist you to measure the correct amount. You can fill the kettle via the spout or after opening the lid. Do not forget to close the lid after filling otherwise the kettle will not automatically switch off after use.
3. Do not fill with less than 0.5 liters of water to "min" indication to prevent the kettle running dry while operating Do not fill with less than 1.7 liters of water to "max" indication.
4. An automatic safety cut-out has been fitted for protection against overheating it will operate if the kettle is switched on when containing insufficient water. Always ensure the water inside the kettle covers the minimum mark on the water level indicator gauge. If the automatic safety cut-out has operated switch the kettle off, disconnect from the power outlet and allow the kettle to cool down for 5 to 10 minutes. Then refill with and switch on the kettle will work as normal.
5. After boiling, the kettle switches off automatically.
6. Disconnect the kettle from the mains electricity supply.
7. Do not open the lid when pouring. If the kettle is overfilled, boiling water may be ejected. The kettle is only to be used with the stand provided.
8. This appliance is intended to be used in household and similar applications such as: staff kitchen areas in shops, offices and other working environments; farm houses; by clients in hotels, motels and other residential type environments; bed and breakfast type environments.

Basic Operation

1. Put the base on the dry, smooth and horizontal plane, insert the plug to the socket. When the kettle is inserted into the base, the power puts through automatically.
2. Press the key shortly, with the sound "Di," it starts running
3. After the water boils, indicator turns off and the buzzer sends out a group "di-di-di" sounds at the same time.

Advanced Operation

1. Press for 3 seconds, with the buzzer sends out "di" sound, it starts running the function of heat insulation. The LED light will be shinning with red light, while after the water boils, the kettle will keep the water temperature for 2 hours with the indicator light shining. During the 2 hours heat insulation function running, it will go on heating when the temperature arrives at 85^ .
2. Press once, we can see the indicator light of 60^ C shines, with the green LED light. It means that it will stop heating when the water temperature is 60^ C .
3. Press twice, we can see the indicator light of 70^ C shines, with the blue LED light. It means that it will stop heating when the water temperature is 70^ C .
4. Press 3 times, we can see the indicator light of 80^ shines, with the yellow LED light. It means that it will stop heating when the water temperature is 80^ .
5. Press 4 times, we can see the indicator light of 90^ C shines, with the purple LED light. It means that it will stop heating when the water temperature is 90^ C .
6. After the use finished, please put plug off the power socket.

Cleaning and Care

Wipe the exterior of the kettle with a soft-damp cloth or sponge. Remove stubborn spots with a cloth moistened with mild liquid detergent. Do not use abrasive scouring pads or powers. Never immerse the kettle in water or other liquids. From time to time depended on the nature of your water supply-a boiled scale deposit is naturally formed and can be found mostly adhered to the heating element- thus reducing the heating efficiency. The amount of boiled scale deposited and subsequently the need to clean or rescale largely depends on the water hardness in your area.

Descending the Kettle

1. Fill the kettle up to "max" with a mixture of one part ordinary vinegar and two parts water-Switch on and wait for the appliance to switch off automatically.
2. Let the mixture remain inside the kettle overnight.
3. Discard the mixture the next morning.
4. Fill the kettle with clean water up to "max" mark and boil again.
5. Discard the boiled water to remove any remaining scale and vinegar.
6. Rinse the inside of the kettle with clean water.

Hints on Disposal

According to the European waste regulation 2002/96/EC this symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council or your household waste disposal service.

Declaration of Conformity

Producer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.

This product is conform to the following European Directives:

2014/30/EU (EMC)

2014/35/EU (LVD)

2011/65/EU (RoHS)

Estimado cliente:

Chere cliente, cher client,